SIST EN ISO 10364:2018
(Main)Structural adhesives - Determination of the pot life (working life) of multi-component adhesives (ISO 10364:2015)
Structural adhesives - Determination of the pot life (working life) of multi-component adhesives (ISO 10364:2015)
ISO 10364:2015 specifies methods for determining the pot life of multi-part adhesives in order to be able to determine whether the pot life conforms to the minimum specified working life required of an adhesive.
For the purposes of simplification, the term "pot life" is deemed to have the same meaning as "working life" and will be used to represent both throughout this International Standard. Methods described to measure the property provide different answers. So the results shall be specified with respect to the method used.
The test methods described are suitable for assessing all multi?part adhesives, and especially epoxy based and polyurethane based adhesives, but they are not suitable for some acrylic-based adhesives.
NOTE 1 Some of the methods described in this International Standard can also be suitable for determination of working life of one-part adhesives that react to humidity (e.g. PUR prepolymers).
NOTE 2 This International Standard can also be used for assessing non-structural adhesives.
Strukturklebstoffe - Bestimmung der Topfzeit (Verarbeitungszeit) von Mehrkomponentenklebstoffen (ISO 10364:2015)
Adhésifs structuraux - Détermination de la durée de vie en pot (délai d'utilisation) d'adhésifs multicomposants (ISO 10364:2015)
ISO 10364:2015 spécifie des méthodes de détermination de la vie en pot des adhésifs multicomposants afin de pouvoir établir si la vie en pot correspond à la durée d'utilisation minimale spécifiée, requise pour un adhésif.
À des fins de simplification, le terme «vie en pot» est considéré comme ayant la même signification que «durée d'utilisation» et sera utilisé pour les deux occurrences terminologiques tout au long de la présente Norme internationale. Les méthodes décrites pour mesurer cette propriété fournissent des résultats divers. Par conséquent, ces derniers doivent être spécifiés par rapport à la méthode utilisée.
Les méthodes d'essai décrites permettent d'évaluer tous les adhésifs multicomposants, et notamment les adhésifs à base d'époxyde et à base de polyuréthanne mais elles ne sont pas appropriées à l'évaluation de certains adhésifs acryliques.
NOTE 1 Parmi les méthodes décrites dans la présente Norme internationale, certaines peuvent également convenir pour déterminer la durée d'utilisation des adhésifs monocomposants qui réagissent à l'humidité (par exemple les prépolymères PUR).
NOTE 2 La présente Norme internationale peut également être utilisée pour évaluer des adhésifs non structuraux.
Konstrukcijska lepila - Ugotavljanje roka uporabnosti večkomponentnih lepil (ISO 10364:2015)
ISO 10364:2015 opisuje metode za določanje življenjske dobe večdelnih lepil z namenom določanja, če se ta ujema z najkrajšo določeno dobo uporabnosti lepila.
Zavoljo poenostavitve ima pojem »življenjska doba« enak pomen kot »doba uporabnosti« in bo v tem mednarodnem standardu uporabljen za oboje. Opisane metode za merjenje lastnosti nudijo različne odgovore. Rezultati bodo zato določeni glede na uporabljeno metodo.
Opisane preskusne metode so primerne za ocenjevanje vseh večdelnih lepil, zlasti tistih, ki temeljijo na epoksi in poliuretanskih lepilih, niso pa primerne za nekatera akrilna lepila.
OPOMBA 1 Nekatere od metod, opisanih v tem mednarodnem standardu, so prav tako lahko primerne za ugotavljanje življenjske dobe enodelnih lepil, ki reagirajo na vlago (npr. PUR prepolimerov).
OPOMBA 2 Ta mednarodni standard se prav tako lahko uporablja za ocenjevanje nekonstrukcijskih lepil.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 10364:2018
01-maj-2018
1DGRPHãþD
SIST EN 14022:2011
.RQVWUXNFLMVNDOHSLOD8JRWDYOMDQMHURNDXSRUDEQRVWLYHþNRPSRQHQWQLKOHSLO ,62
Structural adhesives - Determination of the pot life (working life) of multi-component
adhesives (ISO 10364:2015)
Strukturklebstoffe - Bestimmung der Topfzeit (Verarbeitungszeit) von
Mehrkomponentenklebstoffen (ISO 10364:2015)
Adhésifs structuraux - Détermination de la durée de vie en pot (délai d'utilisation)
d'adhésifs multicomposants (ISO 10364:2015)
Ta slovenski standard je istoveten z: EN ISO 10364:2018
ICS:
83.180 Lepila Adhesives
SIST EN ISO 10364:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 10364:2018
---------------------- Page: 2 ----------------------
SIST EN ISO 10364:2018
EN ISO 10364
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2018
EUROPÄISCHE NORM
ICS 83.180 Supersedes EN 14022:2010
English Version
Structural adhesives - Determination of the pot life
(working life) of multi-component adhesives (ISO
10364:2015)
Adhésifs structuraux - Détermination de la vie en pot Strukturklebstoffe - Bestimmung der Topfzeit
(délai d'utilisation) d'adhésifs multicomposants (ISO (Verarbeitungszeit) von Mehrkomponentenklebstoffen
10364:2015) (ISO 10364:2015)
This European Standard was approved by CEN on 18 April 2017.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10364:2018 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 10364:2018
EN ISO 10364:2018 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 10364:2018
EN ISO 10364:2018 (E)
European foreword
The text of ISO 10364:2015 has been prepared by Technical Committee ISO/TC 61 “Plastics” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 10364:2018 by
Technical Committee CEN/TC 193 “Adhesives” the secretariat of which is held by UNE.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2018, and conflicting national standards
shall be withdrawn at the latest by September 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 14022:2010.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 10364:2015 has been approved by CEN as EN ISO 10364:2018 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 10364:2018
---------------------- Page: 6 ----------------------
SIST EN ISO 10364:2018
INTERNATIONAL ISO
STANDARD 10364
Third edition
2015-09-15
Str
...
SLOVENSKI STANDARD
oSIST prEN ISO 10364:2017
01-februar-2017
.RQVWUXNFLMVNDOHSLOD8JRWDYOMDQMHURNDXSRUDEQRVWLYHþNRPSRQHQWQLKOHSLO ,62
Structural adhesives - Determination of the pot life (working life) of multi-component
adhesives (ISO 10364:2015)
Strukturklebstoffe - Bestimmung der Topfzeit (Verarbeitungszeit) von
Mehrkomponentenklebstoffen (ISO 10364:2015)
Adhésifs structuraux - Détermination de la durée de vie en pot (délai d'utilisation)
d'adhésifs multicomposants (ISO 10364:2015)
Ta slovenski standard je istoveten z: prEN ISO 10364
ICS:
83.180 Lepila Adhesives
oSIST prEN ISO 10364:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 10364:2017
---------------------- Page: 2 ----------------------
oSIST prEN ISO 10364:2017
INTERNATIONAL ISO
STANDARD 10364
Third edition
2015-09-15
Structural adhesives — Determination
of the pot life (working life) of multi-
component adhesives
Adhésifs structuraux — Détermination de la durée de vie en pot (délai
d’utilisation) d’adhésifs multicomposants
Reference number
ISO 10364:2015(E)
©
ISO 2015
---------------------- Page: 3 ----------------------
oSIST prEN ISO 10364:2017
ISO 10364:2015(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2015 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 10364:2017
ISO 10364:2015(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Apparatus . 2
6 Procedure. 3
6.1 Sampling . 3
6.2 Method 1: Determination from the change in apparent viscosity . 3
6.3 Method 2: Determination from the change in extrusion rate . 4
6.4 Method 3: Determination from the reaction temperature . 5
6.5 Method 4: Determination by means of a drying recorder . 5
7 Expression of results . 6
8 Test report . 6
Bibliography .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.