SIST EN 29048:1996

Building construction - Jointing products - Determination of extrudability of sealants using standardized apparatus (ISO 9048:1987)

Applies to all sealants regardless of the kind of packages in which they are supplied or from which they are applied to the joint in buildings. A defined volume of sealant is extruded from a standardized device under defined conditions by means of compressed air and recorded depending on time.

Hochbau - Fugendichtstoffe - Bestimmung der Verarbeitbarkeit von Dichtstoffen (ISO 9048:1987)

Construction immobiliere - Produits pour joints - Détermination de l'extrudabilité des mastics au moyen d'un appareil normalisé (ISO 9048:1987)

La présente Norme internationale spécifie une méthode pour la détermination de l'extrudabilité des mastics à un composant ou à plusieurs composants indépendamment des emballages dans lesquels ils sont livrés ou desquels ils sont appliqués dans les joints des bâtiments.  
NOTE -- Une méthode pour la détermination de l'extrudabilité des mastics à un composant des emballages dans lesquels ils sont livrés est donnée dans l'ISO 8394.

Gradnja objektov - Sredstva za stikovanje - Ugotavljanje iztisljivosti tesnilne mase s standardizirano opremo (ISO 9048:1987)

General Information

• Status: Withdrawn
• Publication Date: 30-Nov-1996
• Withdrawal Date: 13-May-2015
• ICS: 91.100.50 - Binders. Sealing materials
• Technical Committee: ISS SPL.GPO - Building construction
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 17-Apr-2015
• Due Date: 10-May-2015
• Completion Date: 14-May-2015
• Ref Project: EN 29048:1990 - Building construction - Jointing products - Determination of extrudability of sealants using standardized apparatus (ISO 9048:1987)

Relations

• Replaced By: SIST EN ISO 8394-2:2011 - Building construction - Jointing products - Part 2: Determination of extrudability of sealants using standardized apparatus (ISO 8394-2:2010)
• Effective Date: 12-Mar-2011

Standards Content (Sample)

SLOVENSKI SIST EN 29048
prva izdaja
STANDARD
december 1996
Gradnja objektov - Sredstva za stikovanje - Ugotavljanje iztisljivosti
tesnilne mase s standardizirano opremo (ISO 9048:1987)
(prevzet standard EN 29048:1990 z metodo platnice)
Building construction - Jointing products - Determination of extrudability of
sealants using standardized apparatus (ISO 9048:1987)
Construction immobilière - Produits pour joints - Détermination de
l’extrudabilité des mastics au moyen d’un appareil normalisé
(ISO 9048:1987)
Hochbau - Fugendichtstoffe - Bestimmung der Verarbeitbarkeit von
Dichtstoffen (ISO 9048:1987)
Deskriptorji: stavbe, stiki, materiali za tesnjenje, kit, preskusi, ugotavljanje, iztisljivost,
oprema za presku{anje
Referen~na {tevilka
ICS 91.100.50 SIST EN 29048:1996 ((sl),en)
Nadaljevanje na straneh II in III, od 1 do 2 in od 1 do 4
© Standard je zalo`il in izdal Urad Republike Slovenije za standardizacijo in meroslovje pri Ministrstvu za znanost in tehnologijo.
Razmno`evanje ali kopiranje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 29048 : 1996
UVOD
Standard SIST EN 29048 ((sl),en), Gradnja objektov - Sredstva za stikovanje - Ugotavljanje
iztisljivosti tesnilne mase s standardizirano opremo (ISO 9048:1987), prva izdaja, 1996, ima
status slovenskega standarda in je z metodo platnice prevzet evropski standard EN 29048,
Building construction - Jointing products - Determination of extrudability of sealants using
standardized apparatus (ISO 9048:1987), 1990, v angle{kem jeziku.
NACIONALNI PREDGOVOR
Evropski standard EN 29048:1990 je prevzela Evropska organizacija za standardizacijo (CEN)
1990-05-21 in je identi~en mednarodnemu standardu ISO 9048:1987, ki ga je pripravil tehni~ni
odbor Mednarodne organizacije za standardizacijo ISO/TC 59 Gradnja poslopij.
Odlo~itev za prevzem tega standarda po metodi platnice je sprejela delovna skupina
USM/TC GPO/WG 3 Stiki, potrdil pa tehni~ni odbor USM/TC GPO Gradnja poslopij.
Ta slovenski standard je dne 1996-11-21 odobril direktor USM.
ZVEZA S STANDARDOM
S prevzemom tega evropskega standarda velja naslednja zveza:
SIST EN 26927 Gradnja objektov - Sredstva za stikovanje - Tesnilne mase -
Slovar (ISO 6927:1981)
OSNOVA ZA IZDAJO STANDARDA
- Prevzem standarda EN 29048:1990.
OPOMBI
- Povsod, kjer se v besedilu standarda uporablja izraz “evropski standard” ali
“mednarodni standard”, v SIST EN 29048:1996 to pomeni “slovenski standard”.
- Uvod in nacionalni predgovor nista sestavni del standarda.
II

---------------------- Page: 2 ----------------------

SIST EN 29048 : 1996
VSEBINA Stran
1 Namen in podro~je uporabe.1
2 Zveze z drugimi standardi.1
3 Definicije.1
4 Osnove metode.1
5 Oprema.1
6 Staranje presku{ancev.1
7 Potek preskusa.1
8 Poro~ilo o preskusu.2
Po mnenju Ministrstva za informiranje Republike Slovenije z dne 18. februarja 1992, {tev. 23/96-92, spada ta publikacija med
proizvode informativne narave iz 13. to~ke tarifne {tevilke 3, za katere se pla~uje 5-odstotni prometni davek.
III

---------------------- Page: 3 ----------------------

IS0
INTERNATIONAL STANDARD
9048
First edition
1987-12-01
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION
ORGANISATION INTERNATIONALE DE NORMALISATION
MEXflYHAPOaHAfl OPTAHM3A~Vlfl IlO CTAH~APTM3A~MM
---
--
.
Building construction - Jointing products -
Determination of extrudability of sealants using
standardized apparatus
D4 termina tion de l’extrudabilit6 des
Construction immobil&e - Produits pour joints -
mastics au moyen d’un apparel normalis
Reference number
IS0 9048 : 1987 (E)

---------------------- Page: 4 ----------------------

Foreword
IS0 (the International Organization for Standardization) is a worldwide federation of
national standards bodies (IS0 member bodies). The work of preparing International
Standards is normally carried out through IS0 technical committees. Each member
body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the IS0 Council. They are approved in accordance with IS0 procedures requiring at
least 75 % approval by the member bodies voting.
International Standard IS0 9048 was prepared by Technical Committee ISO/TC 59,
Building cons true tion .
Users should note that all International Standards undergo revision from time to time
and that any reference made herein to any other International Standard implies its
latest edition, unless otherwise stated.
0 International Organization for Standardization, 1987
Printed in Switzerland

---------------------- Page: 5 ----------------------

INTERNATIONAL STANDARD IS0 9048 : 1987 (E)
Building construction - Jointing products -
Determination of extrudability of sealants using
standardized apparatus
5.2 Air compressor, with valve and pressure gauge to main-
I Scope and field of application
tain the supply of compressed air at 200 + 2,5 kPa and with an
appropriate connection to the extrusion device.
This International Standard specifies a method for the
determination of extrudability of one-compone
...