SIST EN 13703:2004
(Main)Bitumen and bituminous binders - Determination of deformation energy
Bitumen and bituminous binders - Determination of deformation energy
This European standard specifies a method for determining the conventional energy of bitumen binders from traction characteristics.
Bitumen und bitumenhaltige Bindemittel - Bestimmung der Formänderungsarbeit
Diese Europäische Norm legt ein Verfahren zur Bestimmung der Formänderungs- arbeit von bitumenhaltigen Bindemitteln fest.
Bitumes et liants bitumineux - Détermination de l'énergie de déformation
La présente Norme européenne prescrit une méthode permettant de déterminer l'énergie conventionnelle des liants bitumineux a partir de leurs caractéristiques de traction.
AVERTISSEMENT - L'utilisation de la présente Norme européenne implique l'intervention de produits, d'opérations et d'équipements a caractere dangereux. La présente norme européenne n'est pas censée aborder tous les problemes de sécurité concernés par son usage. Il est de la responsabilité de l'utilisateur de consulter et d'établir des regles de sécurité et d'hygiene appropriées et de déterminer l'applicabilité des restrictions réglementaires avant utilisation.
Bitumen in bitumenska veziva – Določevanje deformacijske energije
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 13703:2004
01-september-2004
%LWXPHQLQELWXPHQVNDYH]LYD±'RORþHYDQMHGHIRUPDFLMVNHHQHUJLMH
Bitumen and bituminous binders - Determination of deformation energy
Bitumen und bitumenhaltige Bindemittel - Bestimmung der Formänderungsarbeit
Bitumes et liants bitumineux - Détermination de l'énergie de déformation
Ta slovenski standard je istoveten z: EN 13703:2003
ICS:
75.140 Voski, bitumni in drugi naftni Waxes, bituminous materials
proizvodi and other petroleum products
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
SIST EN 13703:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 13703:2004
---------------------- Page: 2 ----------------------
SIST EN 13703:2004
EUROPEAN STANDARD
EN 13703
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2003
ICS 91.100.50
English version
Bitumen and bituminous binders - Determination of deformation
energy
Bitumes et liants bitumineux - Détermination de l'énergie de Bitumen und bitumenhaltige Bindemittel - Bestimmung der
déformation Formänderungsarbeit
This European Standard was approved by CEN on 21 November 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13703:2003 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 13703:2004
EN 13703:2003 (E)
Contents page
Foreword.3
1 Scope .4
2 Normative references .4
3 Terms and definitions.4
4 Principle.5
5 Apparatus .5
6 Procedure .5
6.1 Energy calculation from numerical data registry of variables.5
6.2 Energy calculation from the graphics registry of variables .5
7 Calculation and expression of results.6
8 Precision.6
8.1 Repeatability.7
8.2 Reproducibility.7
9 Test report .7
Annex A (normative) Conventional energy specification criteria.8
Bibliography .10
2
---------------------- Page: 4 ----------------------
SIST EN 13703:2004
EN 13703:2003 (E)
Foreword
This document EN 13703:2003 has been prepared by Technical Committee CEN/TC 336 “Bituminous binders”, the
secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by June 2004, and conflicting national standards shall be withdrawn at the latest by
June 2004.
Annex A is normative.
This document includes a Bibliography.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard : Austria, Belgium, Czech Republic, Denmark, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal,
Slovakia, Spain, Sweden, Switzerland and the United Kingdom.
3
---------------------- Page: 5 ----------------------
SIST EN 13703:2004
EN 13703:2003 (E)
1 Scope
This European Standard specifies a method for determining the conventional energy of bituminous binders from
tensile characteristics.
WARNING — The use of this European Standard may involve hazardous materials, operations and
equipment. This European Standard does not purport to address all of the safety problems associated with
its use. It is the responsibility of the user of this European Standard to establish appropriate safety and
health practices and determine the applicability of regulatory limitations prior to use.
2 Normative references
This European Standard incorporates by dated or undated references, provisions from other publications. These
normative references are cited at the appropriate places in the text, and the publications are listed hereafter. For
dated references, subsequent amendments to or revisions of any of these publications apply to this European
Standard only when incorporated in it by amendment or revision. For undated references, the latest edition of the
publication referred to applies (including amendments).
EN 13587, Bitumen and bituminous binders — Determination of the tensile properties of bituminous binders by the
tensile test method.
EN 13589, Bitumen and bituminous binders — Determination of the tensile properties of modified bitumen by the
force ductility method.
3 Terms and definitions
For the purposes of this European Standard, the following terms and definitions apply.
3.1
tensile force
force undergone by a specimen subjected to extension; the unit is N
3.2
elongation
D
increase in length of a specimen expressed in metres
NOTE Percent elongation is calculated as [(new length – initial length)/initial length] x 100.
3.3
breaking point
displacement corresponding to the rupture of the test specimen
3.4
deformation energy
E
i
energy in joules (J) supplied by test pieces, until displacement, i, of the moving element
3.5
conventional energy
E'
i
quotient of deformation energ
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.