SIST EN ISO 7751:2000

Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to design working pressure (ISO 7751:1991)

This International Standard specifies ratios of proof pressure and minimum burst pressure to design working pressure for various categories of hose service. The methods and procedures to perform the proof and burst tests are specified in IS0 1402.

Gummi- und Kunststoffschläuche und -schlauchleitungen - Verhältnisse von Prüf- und Berstdruck zum Betriebsdruck (ISO 7751:1991)

Diese Internationale Norm legt die Verhältnisse von Prüf- und Mindestberst- druck zum Betriebsdruck, für verschiedene Betriebsarten eines Schlauches fest. Die Verfahren und Versuchsanordnungen sind in ISO 1402 festgelegt.

Tuyaux et flexibles en caoutchouc et en plastique - Rapports des pressions d'épreuve et d'éclatement a la pression de service (ISO 7751:1991)

La présente Norme internationale prescrit les rapports de la pression d'épreuve et de la pression minimale d'éclatement à la pression de service, pour différents types de service des tuyaux. Les méthodes et modes opératoires pour exécuter les essais à la pression d'épreuve et à la pression d'éclatement sont prescrits dans l'ISO 1402.

Gumene in polimerne cevi ter cevni priključki - Razmerja preskusnega in razpočnega tlaka za načrtovanje delovnega tlaka (ISO 7751:1991)

Ta mednarodni standard določa razmerja preskusnega in minimalnega razpočnega tlaka za načrtovanje delovnega tlaka za različne kategorije cevnih storitev. Metode in postopki za izvedbo preskusnega in razpočnega preskusa so določeni s standardom ISO 1402.

General Information

• Status: Withdrawn
• Publication Date: 30-Nov-2000
• Withdrawal Date: 07-Dec-2016
• ICS: 23.040.70 - Hoses and hose assemblies
• Technical Committee: IPMA - Polimer materials and products
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 08-Dec-2016
• Due Date: 31-Dec-2016
• Completion Date: 08-Dec-2016
• Ref Project: EN ISO 7751:1997 - Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to design working pressure (ISO 7751:1991)

Relations

• Replaced By: SIST EN ISO 7751:2017 - Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to maximum working pressure (ISO 7751:2016)
• Effective Date: 07-Dec-2016
• Amended By: SIST EN ISO 7751:2000/A1:2014 - Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to maximum working pressure - Amendment 1 - Replacement of "design working pressure" by "maximum working pressure" throughout text (ISO 7751:1991/Amd 1:2011)
• Effective Date: 08-Jun-2022
• Amended By: SIST EN ISO 7751:2000/A1:2014 - Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to maximum working pressure - Amendment 1 - Replacement of "design working pressure" by "maximum working pressure" throughout text (ISO 7751:1991/Amd 1:2011)
• Effective Date: 01-May-2014
• Revised: SIST EN ISO 7751:2017 - Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to maximum working pressure (ISO 7751:2016)
• Effective Date: 01-Sep-2015

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 7751:2000
01-december-2000
*XPHQHLQSROLPHUQHFHYLWHUFHYQLSULNOMXþNL5D]PHUMDSUHVNXVQHJDLQ
UD]SRþQHJDWODND]DQDþUWRYDQMHGHORYQHJDWODND,62
Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to
design working pressure (ISO 7751:1991)
Gummi- und Kunststoffschläuche und -schlauchleitungen - Verhältnisse von Prüf- und
Berstdruck zum Betriebsdruck (ISO 7751:1991)
Tuyaux et flexibles en caoutchouc et en plastique - Rapports des pressions d'épreuve et
d'éclatement a la pression de service (ISO 7751:1991)
Ta slovenski standard je istoveten z: EN ISO 7751:1997
ICS:
23.040.70 Gumene cevi in armature Hoses and hose assemblies
SIST EN ISO 7751:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 7751:2000

---------------------- Page: 2 ----------------------

SIST EN ISO 7751:2000

---------------------- Page: 3 ----------------------

SIST EN ISO 7751:2000

---------------------- Page: 4 ----------------------

SIST EN ISO 7751:2000

---------------------- Page: 5 ----------------------

SIST EN ISO 7751:2000

---------------------- Page: 6 ----------------------

SIST EN ISO 7751:2000
INTERNATIONAL
7751
STANDARD
Second edition
1991-11-15
-_____I__---
Rubber and plastics hoses and hose
assemblies - Ratios of proof and burst pressure
to design working pressure
Tuyaux et f7exibles en caoutchorrc et en plastique - Rapports
6 la pression de service
pressions d%prenve et d’ &la temen t
---
--.---. ----------we -------
p-
---
Reference number
------ IS0 7751:1991(E)
-- _-._ - _. _ .

---------------------- Page: 7 ----------------------

SIST EN ISO 7751:2000
IS0 7751:1991(E)
Foreword
IS0 (the International Organization for Standardization) is a worldwide
federation of national standards bodies (IS0 member bodies). The work
of preparing International Standards is normally carried out through IS0
technical committees. Each member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the
work. IS0 collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an lnter-
national Standard requires approval by at least 75 % of the member
bodies casting a vote.
International S
...