SIST EN 16712-1:2015
(Main)Portable equipment for projecting extinguishing agents supplied by fire fighting pumps - Portable foam equipment - Part 1: Inductors PN 16
Portable equipment for projecting extinguishing agents supplied by fire fighting pumps - Portable foam equipment - Part 1: Inductors PN 16
1.1 This standard defines requirements and tests which apply to inductors PN 16 which are used to proportion foam liquids or other additives to the water stream and work according to the Venturi principle.
1.2 This standard is not applicable to inductors which are integrated in self-priming foam branchpipes.
Tragbare Geräte zum Ausbringen von Löschmitteln, die mit Feuerlöschpumpen gefördert werden - Tragbare Schaumgeräte - Teil 1: Zumischer PN 16
1.1 Die Norm legt Anforderungen und Prüfungen fest, die für Zumischer PN 16 gelten, die der Zumischung von Schaummitteln oder anderen Zusätzen zum Wasserstrom dienen und nach dem Venturiprinzip arbeiten.
1.2 Diese Norm gilt nicht für Zumischer, die in selbstansaugenden Schaumstrahlrohren eingebaut sind.
Equipement portable de projection d’agents d’extinction alimenté par des pompes à usage incendie - Equipements mousse portables - Partie 1: Proportionneurs PN 16
1.1 Le présent document définit les prescriptions et les essais qui s'appliquent aux proportionneurs PN 16 utilisés pour doser des émulseurs ou d’autres additifs dans le jet d'eau, et qui fonctionnent selon le principe Venturi.
1.2 Le présent document ne s'applique pas aux proportionneurs intégrés dans les lances à mousse auto-aspirantes.
Prenosna oprema za črpanje in uporabo gasilnih sredstev iz gasilskih črpalk - Prenosna oprema za izdelavo gasilne pene - 1. del: Primešalniki penil
1.1 Ta standard določa zahteve in preskuse v zvezi s primešalniki penil PN 16, ki se uporabljajo za porazdeljeno dodajanje tekočih penil ali drugih aditivov v vodni tok in delujejo v skladu z Venturijevim načelom.
1.2 Ta standard se ne uporablja za primešalnike penil, vgrajene v samosprožilne ročnike za peno.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.HQLOTragbare Geräte zum Ausbringen von Löschmitteln, die mit Feuerlöschpumpen gefördert werden - Tragbare Schaumgeräte - Teil 1: Zumischer PN 16Equipement portable de projection d’agents d’extinction alimenté par des pompes à usage incendie - Equipements mousse portables - Partie 1: Proportionneurs PN 16Portable equipment for projecting extinguishing agents supplied by fire fighting pumps - Portable foam equipment - Part 1: Inductors PN 1613.220.10Gašenje požaraFire-fightingICS:Ta slovenski standard je istoveten z:EN 16712-1:2015SIST EN 16712-1:2015en,fr,de01-november-2015SIST EN 16712-1:2015SLOVENSKI
STANDARD
SIST EN 16712-1:2015
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16712-1
September
t r s w ICS
s uä t t rä s r English Version
Portable equipment for projecting extinguishing agents supplied by fire fighting pumps æ Portable foam equipment æ Part
sã Inductors PN
s x Equipement portable de projection d 5agents d 5extinction alimenté par des pompes à usage incendie æ Equipements mousse portables æ Partie
s ã Proportionneurs PN
s x
Tragbare Geräte zum Ausbringen von Löschmittelná die mit Feuerlöschpumpen gefördert werden æ Tragbare Schaumgeräte æ Teil
sã Zumischer PN
s x This European Standard was approved by CEN on
s August
t r s wä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey andUnited Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
9
t r s w CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s x y s tæ sã t r s w ESIST EN 16712-1:2015
EN 16712-1:2015 (E) 2 Contents Page European foreword . 3 Introduction . 4 1 Scope . 5 2 Normative references . 5 3 Terms and definitions . 5 4 Inductor types . 7 5 Designation. 8 6 Material . 8 7 Requirements and verification . 8 7.1 General . 8 7.2 Components, dimensions and mass . 9 7.3 Pressures and geodetic suction height . 11 7.4 Inductors without setting device . 12 7.5 Inductors with setting device . 13 7.6 Leak-tightness . 13 8 Information for use . 14 8.1 Instruction and maintenance handbook . 14 8.1.1 General . 14 8.1.2 Instruction handbook . 14 8.1.3 Maintenance handbook . 14 8.2 Marking . 14 8.3 Colour coding . 15 Annex A (informative)
Acceptance test on delivery . 16 Bibliography . 17
SIST EN 16712-1:2015
EN 16712-1:2015 (E) 3 European foreword This document (EN 16712-1:2015) has been prepared by Technical Committee CEN/TC 192 “Fire and Rescue Service Equipment”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2016, and conflicting national standards shall be withdrawn at the latest by March 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. EN 16712 consists of the following parts, under the general title “Portable equipment for projecting extinguishing agents supplied by fire fighting pumps – Portable foam equipment”: — Part 1: Inductors PN 16; — Part 2: Pick-up tubes; — Part 3: Low and medium expansion hand-held foam branchpipes PN 16; — Part 4: High expansion foam generators PN 16. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 16712-1:2015
EN 16712-1:2015 (E) 4 Introduction The inductor is only one piece in the foam system. Other components such as branchpipes, pick-up tubes and delivery hoses should be taken into account (see Figure 2 as example of installation). SIST EN 16712-1:2015
EN 16712-1:2015 (E) 5 1 Scope 1.1 This European Standard defines requirements and tests which apply to inductors PN 16 which are used to proportion foam concentrate or other additives to the water stream and work using the Venturi principle. 1.2 This European Standard is not applicable to inductors which are integrated in self-inducting foam branchpipe. 1.3 This European Standard is not applicable to inductors which have been manufactured before its date of publication as European Standard. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 837-1, Pressure gauges — Part 1: Bourdon tube pressure gauges — Dimensions, metrology, requirements and testing EN 837-3, Pressure gauges — Part 3: Diaphragm and capsule pressure gauges — Dimensions, metrology, requirements and testing EN 16712-2, Portable equipment for projecting extinguishing agents supplied by fire fighting pumps — Portable foam equipment — Part 2: Pick-up tubes 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 inductor equipment which, using the Venturi principle, induces foam concentrates or other additives into a water flow to produce a solution at a predetermined ratio Note 1 to entry: Venturi principle: a negative pressure is created in a suction chamber by means of the injector effect. 3.2 regulating device p2 3.3 setting device device to select the proportion ratio SIST EN 16712-1:2015
EN 16712-1:2015 (E) 6 3.4 proportion ratio percentage of foam concentrates or additives in the foam water solution EXAMPLE If a hand-held foam branchpipe is used to flow 400 l/min of foam water solution at a proportion ratio of 3 %, the foam concentrate flow will be 12 l/min. 3.5 foam water solution homogeneous mixture of water and foam concentrate Note 1 to entry: Foam concentrates are defined in EN 1568 series. 3.6 pressures Note 1 to entry: Pressures are expressed in bar, measured with respect to atmospheric pressure. Note 2 to entry: 1 bar = 0,1 MPa (105 Pa). 3.6.1 foam branchpipe working pressure p1 pressure measured at the inlet of the foam branchpipe 3.6.2 outlet working pressure p2 pressure measured at the outlet of the inductor 3.6.3 inlet working pressure p3 pressure measured at the inlet of the inductor 3.6.4 nominal pressure pN maximum working pressure measured at the inlet of the inductor 3.6.5 test pressure pt static pressure used for leakage tests 3.6.6 burst pressure pB static pressure used for burst test SIST EN 16712-1:2015
EN 16712-1:2015 (E) 7 3.6.7 inductor pressure loss p2 pressure difference between the inle
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.