SIST EN 61034-2:2005/A1:2014

Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements

This part of IEC 61034 provides details of the test procedure to be employed for the measurement of the density of smoke emitted from cables burning under defined conditions. It describes the means of preparing and assembling cables for test, the method of burning the cables, and gives recommended requirements for evaluating test results.

Messung der Rauchdichte von Kabeln und isolierten Leitungen beim Brennen unter definierten Bedingungen - Teil 2: Prüfverfahren und Anforderungen

Mesure de la densité de fumées dégagées par des câbles brûlant dans des conditions définies - Partie 2: Procédure d'essai et exigences

Merjenje gostote dima pri gorenju kablov pri določenih pogojih - 2. del: Preskusni postopek in zahteve - Dopolnilo A1 (IEC 61034-2:2005/A1:2013)

General Information

• Status: Published
• Publication Date: 02-Jan-2014
• ICS: 13.220.40 - Ignitability and burning behaviour of materials and products
• ICS: 29.060.20 - Cables
• Technical Committee: IEKA - Electric cables
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 16-Dec-2013
• Due Date: 20-Feb-2014
• Completion Date: 03-Jan-2014
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Ref Project: EN 61034-2:2005/A1:2013 - Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements

Relations

• Amends: SIST EN 61034-2:2005 - Measurement of smoke density of cables burning under defined conditions -- Part 2: Test procedure and requirements
• Effective Date: 07-Feb-2012
• Amends: SIST EN 61034-2:2005 - Measurement of smoke density of cables burning under defined conditions -- Part 2: Test procedure and requirements
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61034-2:2005/A1:2014
01-februar-2014
0HUMHQMHJRVWRWHGLPDSULJRUHQMXNDEORYSULGRORþHQLKSRJRMLKGHO3UHVNXVQL
SRVWRSHNLQ]DKWHYH'RSROQLOR$,(&$
Measurement of smoke density of cables burning under defined conditions - Part 2: Test
procedure and requirements
Messung der Rauchdichte von Kabeln und isolierten Leitungen beim Brennen unter
definierten Bedingungen - Teil 2: Prüfverfahren und Anforderungen
Mesure de la densité de fumées dégagées par des câbles brûlant dans des conditions
définies - Partie 2: Procédure d'essai et exigences
Ta slovenski standard je istoveten z: EN 61034-2:2005/A1:2013
ICS:
13.220.40 Sposobnost vžiga in Ignitability and burning
obnašanje materialov in behaviour of materials and
proizvodov pri gorenju products
29.060.20 Kabli Cables
SIST EN 61034-2:2005/A1:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61034-2:2005/A1:2014

---------------------- Page: 2 ----------------------

SIST EN 61034-2:2005/A1:2014

EUROPEAN STANDARD
EN 61034-2/A1

NORME EUROPÉENNE
August 2013
EUROPÄISCHE NORM

ICS 13.220.40; 29.020; 29.060.20


English version


Measurement of smoke density of cables burning under defined
conditions -
Part 2: Test procedure and requirements
(IEC 61034-2:2005/A1:2013)


Mesure de la densité de fumées Messung der Rauchdichte von Kabeln und
dégagées par des câbles brûlant dans des isolierten Leitungen beim Brennen unter
conditions définies - definierten Bedingungen -
Partie 2: Procédure d'essai et exigences Teil 2: Prüfverfahren und Anforderungen
(CEI 61034-2:2005/A1:2013) (IEC 61034-2:2005/A1:2013)





This amendment A1 modifies the European Standard EN 61034-2:2005; it was approved by CENELEC on 2013-
06-25. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate
the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61034-2:2005/A1:2013 E

---------------------- Page: 3 ----------------------

SIST EN 61034-2:2005/A1:2014
EN 61034-2:2005/A1:2013 - 2 -
Foreword
The text of document 20/1429/FDIS, future edition 3 of IEC 61034-2:2005/A1, prepared by IEC TC 20,
“Electric cables” was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN 61034-2:2005/A1:2013.
The following dates are fixed:
• latest date by which the document has
(dop) 2014-03-25
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national
(dow) 2016-06-25
standards conflicting with the

document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.

This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed
for Use within Certain Voltage Limits (LVD - 2006/95/EC).

Endorsement notice
The text of the International Standard IEC 61034-2:2005/A1:2013 was approved by CENELEC as a
European Standard without any modification.

---------------------- Page: 4 ----------------------

SIST EN 61034-2:2005/A1:2014
- 3 - EN 61034-2:2005/A1:2013
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications


The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Addition to Annex ZA of EN 61034-2:2005:
Publication Year Title EN/HD Year
IEC 60811-203 - Electric and optical fibre cables - Test EN 60811-203 -
methods for non-metallic materials -
Part 203: General tests - Measurement of
overall dimensions

---------------------- Page: 5 ----------------------

SIST EN 61034-2:2005/A1:2014

---------------------- Page: 6 ----------------------

SIST EN 61034-2:2005/A1:2014



IEC 61034-2

®


Edition 3.0 2013-06




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE




AMENDMENT 1

AMENDEMENT 1





Measurement of smoke
...