EN 61034-2:2005/A1:2013
(Amendment)Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements
Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements
2019-03-22: BT D162/C049 removes link to 2014/35/EU (standard kept as supporting standard)
Messung der Rauchdichte von Kabeln und isolierten Leitungen beim Brennen unter definierten Bedingungen - Teil 2: Prüfverfahren und Anforderungen
Mesure de la densité de fumées dégagées par des câbles brûlant dans des conditions définies - Partie 2: Procédure d'essai et exigences
Merjenje gostote dima pri gorenju kablov pri določenih pogojih - 2. del: Preskusni postopek in zahteve - Dopolnilo A1 (IEC 61034-2:2005/A1:2013)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 61034-2:2005/A1:2014
01-februar-2014
0HUMHQMHJRVWRWHGLPDSULJRUHQMXNDEORYSULGRORþHQLKSRJRMLKGHO 3UHVNXVQL
SRVWRSHNLQ]DKWHYH'RSROQLOR$ ,(& $
Measurement of smoke density of cables burning under defined conditions - Part 2: Test
procedure and requirements
Messung der Rauchdichte von Kabeln und isolierten Leitungen beim Brennen unter
definierten Bedingungen - Teil 2: Prüfverfahren und Anforderungen
Mesure de la densité de fumées dégagées par des câbles brûlant dans des conditions
définies - Partie 2: Procédure d'essai et exigences
Ta slovenski standard je istoveten z: EN 61034-2:2005/A1:2013
ICS:
13.220.40 Sposobnost vžiga in Ignitability and burning
obnašanje materialov in behaviour of materials and
proizvodov pri gorenju products
29.060.20 Kabli Cables
SIST EN 61034-2:2005/A1:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 61034-2:2005/A1:2014
---------------------- Page: 2 ----------------------
SIST EN 61034-2:2005/A1:2014
EUROPEAN STANDARD
EN 61034-2/A1
NORME EUROPÉENNE
August 2013
EUROPÄISCHE NORM
ICS 13.220.40; 29.020; 29.060.20
English version
Measurement of smoke density of cables burning under defined
conditions -
Part 2: Test procedure and requirements
(IEC 61034-2:2005/A1:2013)
Mesure de la densité de fumées Messung der Rauchdichte von Kabeln und
dégagées par des câbles brûlant dans des isolierten Leitungen beim Brennen unter
conditions définies - definierten Bedingungen -
Partie 2: Procédure d'essai et exigences Teil 2: Prüfverfahren und Anforderungen
(CEI 61034-2:2005/A1:2013) (IEC 61034-2:2005/A1:2013)
This amendment A1 modifies the European Standard EN 61034-2:2005; it was approved by CENELEC on 2013-
06-25. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate
the conditions for giving this amendment the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61034-2:2005/A1:2013 E
---------------------- Page: 3 ----------------------
SIST EN 61034-2:2005/A1:2014
EN 61034-2:2005/A1:2013 - 2 -
Foreword
The text of document 20/1429/FDIS, future edition 3 of IEC 61034-2:2005/A1, prepared by IEC TC 20,
“Electric cables” was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN 61034-2:2005/A1:2013.
The following dates are fixed:
• latest date by which the document has
(dop) 2014-03-25
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national
(dow) 2016-06-25
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed
for Use within Certain Voltage Limits (LVD - 2006/95/EC).
Endorsement notice
The text of the International Standard IEC 61034-2:2005/A1:2013 was approved by CENELEC as a
European Standard without any modification.
---------------------- Page: 4 ----------------------
SIST EN 61034-2:2005/A1:2014
- 3 - EN 61034-2:2005/A1:2013
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.