Small craft - Electrical/electronic control systems for steering, shift and throttle - Amendment 1 (ISO 25197:2020/Amd 1:2022)

This document establishes the requirements for the design, construction and testing of electrical/electronic steering, shift and throttle systems and dynamic positioning control systems, or combinations thereof, on small craft of up to 24 m length of hull.
This document does not apply to electric trolling motors and autopilot systems on sailing craft.

Kleine Wasserfahrzeuge - Elektrische/elektronische Regelungssysteme für Steuerung, Schaltung und Antrieb - Änderung 1 (ISO 25197:2020/Amd 1:2022)

Dieses Dokument legt die Anforderungen für den Entwurf, die Ausführung und die Prüfung von elektrischen/elektronischen Systemen für die Steuerung, Getriebeschaltung und die Drehzahlregelung, sowie von dynamischen Positionskontrollsystemen oder Kombinationen davon auf kleinen Wasserfahrzeugen mit einer Rumpflänge bis 24 m fest.
Dieses Dokument gilt nicht für elektrische Außenbordmotoren und Schiffs-Voraus-Steuerungssysteme auf Segelfahrzeugen.

Petits navires - Systèmes électriques/électroniques pour le contrôle de la direction, de l'inverseur et des gaz - Amendement 1 (ISO 25197:2020/Amd 1:2022)

Le présent document établit les exigences relatives à la conception, la construction et les essais des systèmes électriques/électroniques de contrôle de la direction, de commandes d'inverseur, des gaz et de positionnement dynamique, ou de leur combinaison, sur les petits navires d'une longueur de coque inférieure ou égale à 24 m.
Le présent document ne s'applique pas aux moteurs électriques de pêche à la traîne et aux pilotes automatiques installés sur les voiliers.

Mala plovila - Električni/elektronski regulacijski sistem za krmarjenje, prestavljanje in pogon - Dopolnilo A1 (ISO 25197:2020/Amd 1:2022)

General Information

Status
Not Published
Public Enquiry End Date
03-May-2022
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
10-Nov-2022
Due Date
15-Jan-2023

RELATIONS

Buy Standard

Amendment
SIST EN ISO 25197:2020/oprA1:2022
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN ISO 25197:2020/oprA1:2022
01-april-2022

Mala plovila - Električni/elektronski regulacijski sistem za krmarjenje, prestavljanje

in pogon - Dopolnilo A1 (ISO 25197:2020/DAM 1:2022)

Small craft - Electrical/electronic control systems for steering, shift and throttle -

Amendment 1 (ISO 25197:2020/DAM 1:2022)

Kleine Wasserfahrzeuge – Elektrische/elektronische Regelungssysteme für Steuerung,

Schaltung und Antrieb – Änderung 1 (ISO 25197:2020/DAM 1:2022)

Petits navires - Systèmes électriques/électroniques pour le contrôle de la direction, de

l'inverseur et des gaz - Amendement 1 (ISO 25197:2020/DAM 1:2022)
Ta slovenski standard je istoveten z: EN ISO 25197:2020/prA1
ICS:
47.020.60 Električna oprema ladij in Electrical equipment of ships
konstrukcij na morju and of marine structures
47.080 Čolni Small craft
SIST EN ISO 25197:2020/oprA1:2022 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 25197:2020/oprA1:2022
---------------------- Page: 2 ----------------------
SIST EN ISO 25197:2020/oprA1:2022
DRAFT AMENDMENT
ISO 25197:2020/DAM 1
ISO/TC 188 Secretariat: SIS
Voting begins on: Voting terminates on:
2022-02-10 2022-05-05
Small craft — Electrical/electronic control systems for
steering, shift and throttle
AMENDMENT 1

Petits navires — Systèmes électriques/électroniques pour le contrôle de la direction, de l'inverseur et des

gaz
AMENDEMENT 1
ICS: 47.080
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 25197:2020/DAM 1:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022
---------------------- Page: 3 ----------------------
SIST EN ISO 25197:2020/oprA1:2022
ISO 25197:2020/DAM 1:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2022

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on

the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below

or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
© ISO 2022 – All rights reserved
---------------------- Page: 4 ----------------------
SIST EN ISO 25197:2020/oprA1:2022
ISO 25197:2020/DAM 1:2022(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www.iso.org/patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.
For an explanation of the voluntary nature of
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.