Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections - Amendment 1: Change of dimensions of the reference notch - change acceptance criteria (ISO 10893-2:2011/Amd 1:2020)

Zerstörungsfreie Prüfung von Stahlrohren - Teil 2: Automatisierte Wirbelstromprüfung nahtloser und geschweißter (ausgenommen unterpulvergeschweißter) Stahlrohre zum Nachweis von Unvollkommenheiten - Änderung 1 (ISO 10893-2:2011/Amd 1:2020)

No scope available

Essais non destructifs des tubes en acier - Partie 2: Contrôle automatisé par courants de Foucault pour la détection des imperfections des tubes en acier sans soudure et soudés (sauf à l'arc immergé sous flux en poudre) - Amendement 1: Changement de dimensions de l'entaille de référence; changement des critères d'acceptation (ISO 10893-2:2011/Amd 1:2020)

Neporušitveno preskušanje jeklenih cevi - 2. del: Ugotavljanje napak nevarjenih in varjenih jeklenih cevi (razen obločno varjenih pod praškom) z avtomatizirano preiskavo z vrtinčnimi tokovi - Dopolnilo A1: Sprememba dimenzij zareze - sprememba meril sprejemljivosti (ISO 10893-2:2011/Amd 1:2020)

General Information

Status
Published
Public Enquiry End Date
11-Nov-2019
Publication Date
11-Jun-2020
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
11-Jun-2020
Due Date
16-Aug-2020
Completion Date
12-Jun-2020

Relations

Buy Standard

Amendment
SIST EN ISO 10893-2:2011/A1:2020
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Amendment
SIST EN ISO 10893-2:2011/oprA1:2019
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10893-2:2011/A1:2020
01-september-2020

Neporušitveno preskušanje jeklenih cevi - 2. del: Ugotavljanje napak nevarjenih in

varjenih jeklenih cevi (razen obločno varjenih pod praškom) z avtomatizirano
preiskavo z vrtinčnimi tokovi - Dopolnilo A1: Sprememba dimenzij zareze -
sprememba meril sprejemljivosti (ISO 10893-2:2011/Amd 1:2020)

Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of

seamless and welded (except submerged arc-welded) steel tubes for the detection of

imperfections - Amendment 1: Change of dimensions of the reference notch - change

acceptance criteria (ISO 10893-2:2011/Amd 1:2020)

Zerstörungsfreie Prüfung von Stahlrohren - Teil 2: Automatisierte Wirbelstromprüfung

nahtloser und geschweißter (ausgenommen unterpulvergeschweißter) Stahlrohre zum
Nachweis von Unvollkommenheiten - Änderung 1 (ISO 10893-2:2011/Amd 1:2020)

Essais non destructifs des tubes en acier - Partie 2: Contrôle automatisé par courants de

Foucault pour la détection des imperfections des tubes en acier sans soudure et soudés

(sauf à l'arc immergé sous flux en poudre) - Amendement 1: Changement de dimensions

de l'entaille de référence; changement des critères d'acceptation (ISO 10893-
2:2011/Amd 1:2020)
Ta slovenski standard je istoveten z: EN ISO 10893-2:2011/A1:2020
ICS:
23.040.10 Železne in jeklene cevi Iron and steel pipes
77.040.20 Neporušitveno preskušanje Non-destructive testing of
kovin metals
SIST EN ISO 10893-2:2011/A1:2020 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 10893-2:2011/A1:2020
---------------------- Page: 2 ----------------------
SIST EN ISO 10893-2:2011/A1:2020
EN ISO 10893-2:2011/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2020
EUROPÄISCHE NORM
ICS 77.140.75; 77.040.20; 23.040.10
English Version
Non-destructive testing of steel tubes - Part 2: Automated
eddy current testing of seamless and welded (except
submerged arc-welded) steel tubes for the detection of
imperfections - Amendment 1: Change of dimensions of
the reference notch; change acceptance criteria (ISO
10893-2:2011/Amd 1:2020)

Essais non destructifs des tubes en acier - Partie 2: Zerstörungsfreie Prüfung von Stahlrohren - Teil 2:

Contrôle automatisé par courants de Foucault pour la Automatisierte Wirbelstromprüfung nahtloser und

détection des imperfections des tubes en acier sans geschweißter (ausgenommen

soudure et soudés (sauf à l'arc immergé sous flux en unterpulvergeschweißter) Stahlrohre zum Nachweis

poudre) - Amendement 1: Changement de dimensions von Unvollkommenheiten - Änderung 1 (ISO 10893-

de l'entaille de référence; changement des critères 2:2011/Amd 1:2020)
d'acceptation (ISO 10893-2:2011/Amd 1:2020)

This amendment A1 modifies the European Standard EN ISO 10893-2:2011; it was approved by CEN on 11 May 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of

this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the

same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10893-2:2011/A1:2020 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 10893-2:2011/A1:2020
EN ISO 10893-2:2011/A1:2020 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

---------------------- Page: 4 ----------------------
SIST EN ISO 10893-2:2011/A1:2020
EN ISO 10893-2:2011/A1:2020 (E)
European foreword

This document (EN ISO 10893-2:2011/A1:2020) has been prepared by Technical Committee ISO/TC 17

"Steel" in collaboration with Technical Committee CEN/TC 459/SC 10 “Steel tubes, and iron and steel

fittings” the secretariat of which is held by UNI.

This Amendment to the European Standard EN ISO 10893-2:2011 shall be given the status of a national

standard, either by publication of an identical text or by endorsement, at the latest by December 2020,

and conflicting national standards shall be withdrawn at the latest by December 2020.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN shall not be held responsible for identifying any or all such patent rights.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the

following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,

Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, F
...

SLOVENSKI STANDARD
SIST EN ISO 10893-2:2011/oprA1:2019
01-november-2019

Neporušitveno preskušanje jeklenih cevi - 2. del: Ugotavljanje napak nevarjenih in

varjenih jeklenih cevi (razen obločno varjenih pod praškom) z avtomatizirano
preiskavo z vrtinčnimi tokovi - Dopolnilo A1: Sprememba dimenzij zareze -
sprememba meril sprejemljivosti (ISO 10893-2:2011/DAM 1:2019)

Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of

seamless and welded (except submerged arc-welded) steel tubes for the detection of

imperfections - Amendment 1: Change of dimensions of the reference notch - change

acceptance criteria (ISO 10893-2:2011/DAM 1:2019)

Zerstörungsfreie Prüfung von Stahlrohren - Teil 2: Automatisierte Wirbelstromprüfung

nahtloser und geschweißter (ausgenommen unterpulvergeschweißter) Stahlrohre zum
Nachweis von Unvollkommenheiten - Änderung 1 (ISO 10893-2:2011/DAM 1:2019)

Essais non destructifs des tubes en acier - Partie 2: Contrôle automatisé par courants de

Foucault pour la détection des imperfections des tubes en acier sans soudure et soudés

(sauf à l'arc immergé sous flux en poudre) - Amendement 1: Changement de dimensions

de l'entaille de référence; changement des critères d'acceptation (ISO 10893-
2:2011/DAM 1:2019)
Ta slovenski standard je istoveten z: EN ISO 10893-2:2011/prA1
ICS:
23.040.10 Železne in jeklene cevi Iron and steel pipes
77.040.20 Neporušitveno preskušanje Non-destructive testing of
kovin metals
SIST EN ISO 10893-2:2011/oprA1:2019 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 10893-2:2011/oprA1:2019
---------------------- Page: 2 ----------------------
SIST EN ISO 10893-2:2011/oprA1:2019
DRAFT AMENDMENT
ISO 10893-2:2011/DAM 1
ISO/TC 17/SC 19 Secretariat: UNI
Voting begins on: Voting terminates on:
2019-08-20 2019-11-12
Non-destructive testing of steel tubes —
Part 2:
Automated eddy current testing of seamless and welded
(except submerged arc-welded) steel tubes for the
detection of imperfections
AMENDMENT 1: Change of dimensions of the reference notch;
change acceptance criteria
Essais non destructifs des tubes en acier —

Partie 2: Contrôle automatisé par courants de Foucault pour la détection des imperfections des tubes en

acier sans soudure et soudés (sauf à l'arc immergé sous flux en poudre)

AMENDEMENT 1: Changement de dimensions de l'encoche de référence; changement critères d'acceptation

ICS: 77.140.75; 77.040.20; 23.040.10
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REF
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.