SIST EN ISO 10893-12:2011/A1:2020

Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes - Amendment 1: Change of acceptance criteria (ISO 10893-12:2011/Amd 1:2020)

Zerstörungsfreie Prüfung von Stahlrohren - Teil 12: Automatisierte Ultraschall-Wanddickenprüfung nahtloser und geschweißter (ausgenommen unterpulvergeschweißter) Stahlrohre über den gesamten Rohrumfang - Änderung 1 (ISO 10893-12:2011/Amd 1:2020)

No scope available

Essais non destructifs des tubes en acier - Partie 12: Contrôle automatisé de l'épaisseur par ultrasons sur toute la circonférence des tubes en acier sans soudure et soudés (sauf à l'arc immergé sous flux en poudre) - Amendement 1: Modification des critères d'acceptation (ISO 10893-12:2011/Amd 1:2020)

Neporušitveno preskušanje jeklenih cevi - 12. del: Ugotavljanje debeline po celotnem obodu nevarjenih in varjenih jeklenih cevi (razen obločno varjenih pod praškom) z avtomatizirano ultrazvočno preiskavo - Dopolnilo A1: Sprememba meril sprejemljivosti (ISO 10893-12:2011/Amd 1:2020)

General Information

• Status: Published
• Public Enquiry End Date: 18-Nov-2019
• Publication Date: 22-Jun-2020
• ICS: 23.040.10 - Iron and steel pipes
• ICS: 77.040.20 - Non-destructive testing of metals
• Technical Committee: IFEK - Ferrous metals
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 18-Jun-2020
• Due Date: 23-Aug-2020
• Completion Date: 23-Jun-2020
• Ref Project: EN ISO 10893-12:2011/A1:2020 - Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes - Amendment 1: Change of acceptance criteria (ISO 10893-12:2011/Amd 1:2020)

Relations

• Amends: SIST EN ISO 10893-12:2011 - Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes (ISO 10893-12:2011)
• Effective Date: 03-Jul-2019

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10893-12:2011/A1:2020
01-september-2020
Neporušitveno preskušanje jeklenih cevi - 12. del: Ugotavljanje debeline po
celotnem obodu nevarjenih in varjenih jeklenih cevi (razen obločno varjenih pod
praškom) z avtomatizirano ultrazvočno preiskavo - Dopolnilo A1: Sprememba
meril sprejemljivosti (ISO 10893-12:2011/Amd 1:2020)
Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic
thickness testing of seamless and welded (except submerged arc-welded) steel tubes -
Amendment 1: Change of acceptance criteria (ISO 10893-12:2011/Amd 1:2020)
Zerstörungsfreie Prüfung von Stahlrohren - Teil 12: Automatisierte Ultraschall-
Wanddickenprüfung nahtloser und geschweißter (ausgenommen
unterpulvergeschweißter) Stahlrohre über den gesamten Rohrumfang - Änderung 1 (ISO
10893-12:2011/Amd 1:2020)
Essais non destructifs des tubes en acier - Partie 12: Contrôle automatisé de l'épaisseur
par ultrasons sur toute la circonférence des tubes en acier sans soudure et soudés (sauf
à l'arc immergé sous flux en poudre) - Amendement 1: Modification des critères
d'acceptation (ISO 10893-12:2011/Amd 1:2020)
Ta slovenski standard je istoveten z: EN ISO 10893-12:2011/A1:2020
ICS:
23.040.10 Železne in jeklene cevi Iron and steel pipes
77.040.20 Neporušitveno preskušanje Non-destructive testing of
kovin metals
SIST EN ISO 10893-12:2011/A1:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 10893-12:2011/A1:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 10893-12:2011/A1:2020


EN ISO 10893-
EUROPEAN STANDARD
12:2011/A1
NORME EUROPÉENNE

EUROPÄISCHE NORM

June 2020
ICS 77.140.75; 77.040.20; 23.040.10
English Version

Non-destructive testing of steel tubes - Part 12: Automated
full peripheral ultrasonic thickness testing of seamless and
welded (except submerged arc-welded) steel tubes -
Amendment 1: Change of acceptance criteria (ISO 10893-
12:2011/Amd 1:2020)
Essais non destructifs des tubes en acier - Partie 12: Zerstörungsfreie Prüfung von Stahlrohren - Teil 12:
Contrôle automatisé de l'épaisseur par ultrasons sur Automatisierte Ultraschall-Wanddickenprüfung
toute la circonférence des tubes en acier sans soudure nahtloser und geschweißter (ausgenommen
et soudés (sauf à l'arc immergé sous flux en poudre) - unterpulvergeschweißter) Stahlrohre über den
Amendement 1: Modification des critères d'acceptation gesamten Rohrumfang - Änderung 1 (ISO 10893-
(ISO 10893-12:2011/Amd 1:2020) 12:2011/Amd 1:2020)
This amendment A1 modifies the European Standard EN ISO 10893-12:2011; it was approved by CEN on 11 May 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10893-12:2011/A1:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 10893-12:2011/A1:2020
EN ISO 10893-12:2011/A1:2020 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 10893-12:2011/A1:2020
EN ISO 10893-12:2011/A1:2020 (E)
European foreword
This document (EN ISO 10893-12:2011/A1:2020) has been prepared by Technical Committee ISO/TC
17 "Steel" in collaboration with Technical Committee CEN/TC 459/SC 10 “Steel tubes, and iron and
steel fittings” the secretariat of which is held by UNI.
This Amendment to the European Standard EN ISO 10893-12:2011 shall be given the status of a
national standard, either by publication of an identical text or by endorsement, at the latest by
December 2020, and conflicting national standards shall be withdrawn at the latest by December 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this Eu
...

SLOVENSKI STANDARD
SIST EN ISO 10893-12:2011/oprA1:2019
01-november-2019
Neporušitveno preskušanje jeklenih cevi - 12. del: Ugotavljanje debeline po
celotnem obodu nevarjenih in varjenih jeklenih cevi (razen obločno varjenih pod
praškom) z avtomatizirano ultrazvočno preiskavo - Dopolnilo A1: Sprememba
meril sprejemljivosti (ISO 10893-12:2011/DAM 1:2019)
Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic
thickness testing of seamless and welded (except submerged arc-welded) steel tubes -
Amendment 1: Change of acceptance criteria (ISO 10893-12:2011/DAM 1:2019)
Zerstörungsfreie Prüfung von Stahlrohren - Teil 12: Automatisierte Ultraschall-
Wanddickenprüfung nahtloser und geschweißter (ausgenommen
unterpulvergeschweißter) Stahlrohre über den gesamten Rohrumfang - Änderung 1 (ISO
10893-12:2011/DAM 1:2019)
Essais non destructifs des tubes en acier - Partie 12: Contrôle automatisé de l'épaisseur
par ultrasons sur toute la circonférence des tubes en acier sans soudure et soudés (sauf
à l'arc immergé sous flux en poudre) - Amendement 1: Modification des critères
d'acceptation (ISO 10893-12:2011/DAM 1:2019)
Ta slovenski standard je istoveten z: EN ISO 10893-12:2011/prA1
ICS:
23.040.10 Železne in jeklene cevi Iron and steel pipes
77.040.20 Neporušitveno preskušanje Non-destructive testing of
kovin metals
SIST EN ISO 10893-12:2011/oprA1:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 10893-12:2011/oprA1:2019

---------------------- Page: 2 ----------------------
SIST EN ISO 10893-12:2011/oprA1:2019
DRAFT AMENDMENT
ISO 10893-12:2011/DAM 1
ISO/TC 17/SC 19 Secretariat: UNI
Voting begins on: Voting terminates on:
2019-08-27 2019-11-19
Non-destructive testing of steel tubes —
Part 12:
Automated full peripheral ultrasonic thickness testing
of seamless and welded (except submerged arc-welded)
steel tubes
AMENDMENT 1: Change of acceptance criteria
Essais non destructifs des tubes en acier —
Partie 12: Contrôle automatisé de l'épaisseur par ultrasons sur toute la circonférence des tubes en acier
sans soudure et soudés (sauf à l'arc immergé sous flux en poudre)
AMENDEMENT 1: .
ICS: 77.140.75; 77.040.20; 23.040.10
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN I
...