Chemicals used for treatment of water intended for human consumption - Sulfur dioxide

This European Standard specifies requirements and the corresponding test methods for sulfur dioxide used for the treatment of water intended for human consumption.

Produkte zur Aufbereitung von Wasser für den menschlichen Gebrauch - Schwefeldioxid

Dieses Dokument gilt für Schwefeldioxid zur Aufbereitung von Wasser für den menschlichen Gebrauch. Es beschreibt die Eigenschaften von Schwefeldioxid und legt die Anforderungen sowie die entsprechenden Prüfverfahren für Schwefeldioxid fest. Es gibt Informationen für die Anwendung von Schwefeldioxid in der Wasseraufbereitung. Es legt darüber hinaus Regeln für die sichere Handhabung und Benutzung fest (siehe Anhang B).

Produits chimiques pour le traitement de l'eau destinée a la consommation humaine - Dioxyde de soufre

Cette norme européenne précise les prescriptions et les méthodes d'analyse correspondant au dioxyde de soufre utilisé pour le traitement de l'eau destinée a la consommation humaine.

Kemikalije, ki se uporabljajo za pripravo pitne vode – Žveplov dioksid

General Information

Status
Published
Publication Date
31-Aug-2005
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Sep-2005
Due Date
01-Sep-2005
Completion Date
01-Sep-2005

RELATIONS

Buy Standard

Standard
SIST EN 1019:2005
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kemikalije, ki se uporabljajo za pripravo pitne vode – Žveplov dioksidProdukte zur Aufbereitung von Wasser für den menschlichen Gebrauch - SchwefeldioxidProduits chimiques pour le traitement de l'eau destinée a la consommation humaine - Dioxyde de soufreChemicals used for treatment of water intended for human consumption - Sulfur dioxide71.100.80Chemicals for purification of water13.060.20Pitna vodaDrinking waterICS:Ta slovenski standard je istoveten z:EN 1019:2005SIST EN 1019:2005en01-september-2005SIST EN 1019:2005SLOVENSKI

STANDARDSIST EN 1019:19991DGRPHãþD
SIST EN 1019:2005
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1019
June 2005 ICS 71.100.80 Supersedes EN 1019:1995 English version

Chemicals used for treatment of water intended for human consumption - Sulfur dioxide

Produits chimiques pour le traitement de l'eau destinée à la consommation humaine - Dioxyde de soufre

Produkte zur Aufbereitung von Wasser für den menschlichen Gebrauch - Schwefeldioxid This European Standard was approved by CEN on 25 April 2005.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36

B-1050 Brussels © 2005 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1019:2005: ESIST EN 1019:2005

EN 1019:2005 (E) 2 Contents Page Foreword..........................................................................................................................................................3 Introduction......................................................................................................................................................4 1 Scope...................................................................................................................................................5 2 Normative references.........................................................................................................................5 3 Description..........................................................................................................................................5 4 Purity criteria.......................................................................................................................................7 5 Test methods.......................................................................................................................................8 6 Labelling – Transportation – Storage................................................................................................9 Annex A (informative)

General information on sulfur dioxide..................................................................12 Annex B (normative)

General rules relating to safety................................................................................13 Bibliography...................................................................................................................................................14

SIST EN 1019:2005

EN 1019:2005 (E) 3 Foreword This document (EN 1019:2005) has been prepared by Technical Committee CEN/TC 164 “Water supply”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2005, and conflicting national standards shall be withdrawn at the latest by December 2005. This document supersedes EN 1019:1995. Significant technical differences between this edition and EN 1019:1995 are as follows: deletion of the reference to EU Directive 80/778/EEC of July, 15 1980

in order to take into account the latest Directive. (see [1]). According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. SIST EN 1019:2005

EN 1019:2005 (E) 4 Introduction In respect of potential adverse effects on the quality of water intended for human consumption, caused by the product covered by this European Standard : a) this European Standard provides no information as to whether the product may be used without restriction in any of the Member States of the EU or EFTA ; b) it should be noted that, while awaiting the adoption of verifiable European criteria, existing national regulations concerning the use and/or the characteristics of this product remain in force. NOTE

Conformity with this European standard does not confer or imply acceptance or approval of the product in any of the Member States of the EU or EFTA. The use of the product covered by this document is subject to regulation or control by National Authorities.

SIST EN 1019:2005

EN 1019:2005 (E) 5 1 Scope This European Standard is applicable to sulfur dioxide used for treatment of water intended for human consumption. It describes the characteristics and specifies the requirements and the corresponding test methods for sulfur dioxide. It gives information on its use in water treatment. It also determines the rules relating to safe handling and use (see annex B). 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references , only the edition cited applies. For undated references the latest edition of the referenced document (including any amendments) applies. EN ISO 3696, Water for analytical laboratory use – Specification and test methods (ISO 3696:1987) ISO 760, Determination of water-Karl Fischer method. (General method) ISO 3165, Sampling of chemical products for industrial use – Safety in sampling ISO 6206, Chemical products for industrial use – Sampling – Vocabulary 3 Description 3.1 Identification 3.1.1 Chemical name Sulfur dioxide. 3.1.2 Synonym or common name Sulfurous acid anhydride. 3.1.3 Relative molecular mass 64. 3.1.4 Empirical formula SO2. 3.1.5 Chemical formula SO2. 3.1.6 CAS Registry Number1) 7446-09-5.

1) Chemical Abstracts Service Registry Number. SIST EN 1019:2005

EN 1019:2005 (E) 6 3.1.7 EINECS reference2) 231-195-2. 3.2 Commercial form The product is available as a liquefied gas 3.3 Physical properties 3.3.1 Appearance The product is ,at ambient temperature and normal pressure, a colourless gas with a pungent characteristic odour . 3.3.2 Density The liquid density of this product is 1,4 g/ml at 10 °C. The

vapour density is
2,7 g/l at 0 °C. 3.3.3 Solubility in water The product is soluble at 110 g/l
at 20 °C. 3.3.4 Vapour pressure 320 kPa at 20 °C.

3.3.5 Boiling point at 100 kPa3) -9,4 °C. 3.3.6 Melting point -75,5 °C. 3.3.7 Specific heat Liquid : 1,337 J/(g.K) at 0 °C 3.3.8 Viscosity (dynamic) Gas: 11,40 x 10-3 mPa.s at 20 °C.

Liquid: 0,76 mPa.s at –50 °C
3.3.9 Critical temperature 157,5 °C

2) European Inventory of Existing Commercial Chemical Substances. 3) 100 kPa = 1 bar. SIST EN 1019:2005

EN 1019:2005 (E) 7 3.3.10 Critical pressure 7 780 kPa 3.3.11 Physical hardness Not applicable. 3.4 Chemical properties Sulfur dioxide is an acidic gas and a reducing agent. The pH value of an aqueous solution is about 1,5. Sulfur dioxide reacts violently with oxidizing agents, e.g. peroxides, permanganates. 4 Purity criteria 4.1 General This document specifies the minimum purity requirements for sulfur dioxide used for the treatment of water intended for human consumption. Limits are given for impurities commonly present in the product. Depending on the raw material and the manufacturing process other impurities may be present and, if so, this shall be notified to the user and when necessary to relevant authorities. NOTE

Users of this product should check the national regulations in order to clarify whether it is of appropriate purity for treatment of water intended for human consumption, taking into account raw water quality, required dosage, contents of other impurities and additives used in the products not stated in this product standard. Limits have been given for impurities and chemical parameters where these are likely to be present in significant quantities from the current produ

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.