SIST EN ISO 29468:2022
(Main)Thermal insulating products for building applications - Determination of flatness (ISO 29468:2022)
Thermal insulating products for building applications - Determination of flatness (ISO 29468:2022)
This European Standard specifies the equipment and procedures for determining the deviation from flatness for full-size products. It is applicable to thermal insulating products.
Wärmedämmstoffe für das Bauwesen - Bestimmung der Ebenheit (ISO 29468:2022)
Diese Internationale Norm legt Prüfeinrichtungen und Verfahren zur Bestimmung der Abweichung von der Ebenheit an Produkten in Liefermaßen fest. Sie gilt für Wärmedämmstoffe.
Produits isolants thermiques destinés aux applications du bâtiment - Détermination de la planéité (ISO 29468:2022)
Le présent document spécifie l’équipement et les modes opératoires permettant de déterminer l’écart de planéité des produits en vraies dimensions. Il s’applique aux produits isolants thermiques.
Toplotno izolacijski proizvodi za uporabo v gradbeništvu - Ugotavljanje ploskosti (ISO 29468:2022)
Ta evropski standard določa opremo in postopke za ugotavljanje odklona od ploskosti za proizvode naravne velikosti. Uporablja se za toplotnoizolacijske proizvode.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 29468:2022
01-november-2022
Nadomešča:
SIST EN 825:2013
Toplotno izolacijski proizvodi za uporabo v gradbeništvu - Ugotavljanje ploskosti
(ISO 29468:2022)
Thermal insulating products for building applications - Determination of flatness (ISO
29468:2022)
Wärmedämmstoffe für das Bauwesen - Bestimmung der Ebenheit (ISO 29468:2022)
Produits isolants thermiques destinés aux applications du bâtiment - Détermination de la
planéité (ISO 29468:2022)
Ta slovenski standard je istoveten z: EN ISO 29468:2022
ICS:
91.100.60 Materiali za toplotno in Thermal and sound insulating
zvočno izolacijo materials
SIST EN ISO 29468:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 29468:2022
---------------------- Page: 2 ----------------------
SIST EN ISO 29468:2022
EN ISO 29468
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2022
EUROPÄISCHE NORM
ICS 91.100.60 Supersedes EN 825:2013
English Version
Thermal insulating products for building applications -
Determination of flatness (ISO 29468:2022)
Produits isolants thermiques destinés aux applications Wärmedämmstoffe für das Bauwesen - Bestimmung
du bâtiment - Détermination de la planéité (ISO der Ebenheit (ISO 29468:2022)
29468:2022)
This European Standard was approved by CEN on 7 August 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 29468:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 29468:2022
EN ISO 29468:2022 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 29468:2022
EN ISO 29468:2022 (E)
European foreword
This document (EN ISO 29468:2022) has been prepared by Technical Committee ISO/TC 163/SC 1
"Test and measurement methods" in collaboration with Technical Committee CEN/TC 88 “Thermal
insulating materials and products” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2023, and conflicting national standards shall
be withdrawn at the latest by September 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 825:2013.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 29468:2022 has been approved by CEN as EN ISO 29468:2022 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 29468:2022
---------------------- Page: 6 ----------------------
SIST EN ISO 29468:2022
INTERNATIONAL ISO
STANDARD 29468
Second edition
2022-08
Thermal insulating products
for building applications —
Determination of flatness
Produits isolants thermiques destinés aux applications du bâtiment —
Détermination de la planéité
Reference number
ISO 29468:2022(E)
© ISO 2022
---------------------- Page: 7 ----------------------
SIST EN ISO 29468:2022
ISO 29468:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
© ISO 2022 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 29468:2022
ISO 29468:2022(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus . 1
6 Test specimens . 1
6.1 Dimensions of test specimens . 1
6.2 Number of test specimens . 2
6.3 Conditioning of test specimens . 2
7 Procedure .2
7.1 Test conditions . 2
7.2 Test procedure . 2
8 Calculation and expression of results .
...
SLOVENSKI STANDARD
oSIST prEN ISO 29468:2021
01-julij-2021
Toplotno izolacijski proizvodi za uporabo v gradbeništvu - Ugotavljanje ploskosti
(ISO/DIS 29468:2021)
Thermal insulating products for building applications - Determination of flatness (ISO/DIS
29468:2021)
Wärmedämmstoffe für das Bauwesen - Bestimmung der Ebenheit (ISO/DIS 29468:2021)
Produits isolants thermiques destinés aux applications du bâtiment - Détermination de la
planéité (ISO/DIS 29468:2021)
Ta slovenski standard je istoveten z: prEN ISO 29468
ICS:
91.100.60 Materiali za toplotno in Thermal and sound insulating
zvočno izolacijo materials
oSIST prEN ISO 29468:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 29468:2021
---------------------- Page: 2 ----------------------
oSIST prEN ISO 29468:2021
DRAFT INTERNATIONAL STANDARD
ISO/DIS 29468
ISO/TC 163/SC 1 Secretariat: DIN
Voting begins on: Voting terminates on:
2021-05-12 2021-08-04
Thermal insulating products for building applications —
Determination of flatness
Produits isolants thermiques destinés aux applications du bâtiment — Détermination de la planéité
ICS: 91.100.60
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 29468:2021(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2021
---------------------- Page: 3 ----------------------
oSIST prEN ISO 29468:2021
EN ISO 29468:2008(E)
ISO/DIS 29468:2021(E)
Contents Page
Foreword .iv
Introduction.Fehler! Textmarke nicht definiert.
1 Scope.1
2 Terms and definitions .1
3 Principle.1
4 Apparatus.1
5 Test specimens.1
6 Procedure.3
7 Calculation and expression of results .3
8 Accuracy of measurement.4
9 Test report.4
COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
© ISO 2008 – All rights reserved iii
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 29468:2021
ISO/DIS 29468:2021(E)
Contents Page
Foreword . iv
Introduction . Fehler! Textmarke nicht definiert.
1 Scope . 1
2 Terms and definitions . 1
3 Principle. 1
4 Apparatus . 1
5 Test specimens . 1
6 Procedure . 3
7 Calculation and expression of results . 3
8 Accuracy of measurement. 4
9 Test report . 4
© ISO 2021 – All rights reserved iii
---------------------- Page: 5 ----------------------
oSIST prEN ISO 29468:2021
ISO/DIS 29468:2021(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national
standards bodies (ISO member bodies). The work of preparing International Standards is normally
carried out through ISO technical committees. Each member body interested in a subject for which a
technical committee has been established has the right to be represented on that committee.
International organizations, governmental and non-governmental, in liaison with ISO, also take part in
the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all
matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval crit
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.