Doors - Operating forces - Requirements and classification

This European Standard is applicable to hinged/pivoted and sliding doorsets with latches, for pedestrian use. It defines the classification of the test results for the forces and/or torques to open/close doors and to engage/release and lock/unlock the hardware using a key or handle, after testing in accordance with EN 12046 2.
It is only applicable to the manual operation of doorsets.
The classification of forces for doorsets with self-closing devices engaged is excluded from this test method. It is also not applicable to doorsets with special hardware, e.g. emergency exit devices.
The tests are applicable to doorsets of any material.
The operation of some glazed doors (door high windows) involves hardware with latches and may be classified in accordance with this European Standard.

Türen - Bedienungskräfte - Anforderungen und Klassifizierung

Die vorliegende Europäische Norm gilt für Drehflügel- und Schiebetürelemente, die mit Schlossfallen ausgestattet und für die Benutzung durch Fußgänger vorgesehen sind. Sie legt die Klassifizierung der Prüfergebnisse fest, die sich bei Prüfung nach EN 12046-2 für die Kräfte und/oder Momente ergeben, die zum Öffnen/Schließen von Türen sowie zum Einklinken/Freigeben und Verriegeln/Entriegeln der Beschläge mit Hilfe eines Schlüssels oder eines Drückers erforderlich sind.
Sie ist ausschließlich auf die Handbetätigung von Türelementen anwendbar.
Die Klassifizierung der Kräfte für Türelemente mit Selbstschließung ist von diesem Prüfverfahren ausgenommen. Das Verfahren ist ebenfalls nicht auf Türelemente mit speziellen Beschlägen, z. B. Notausgangsverschlüsse, anwendbar.
Die Prüfungen sind auf Türelemente aller Werkstoffe anwendbar.
Die Bedienung einiger verglaster Türen (Fenstertüren) umfasst Beschläge mit Fallen und darf entsprechend der vorliegenden Europäischen Norm klassifiziert werden.

Portes - Forces de manoeuvre - Prescriptions et classification

La présente Norme européenne est applicable aux blocs-portes battants/pivotants et coulissants, équipés de pênes demi-tour et destinés à être utilisés par des piétons. Elle fournit une classification des résultats d'essai en fonction des forces et/ou couples d’ouverture/fermeture des portes et des forces et/ou couples nécessaires pour enclencher/libérer et verrouiller/déverrouiller la quincaillerie à l’aide d’une clé ou d’une poignée, à l'issue d'essais réalisés conformément à l'EN 12046 2.
La présente Norme est uniquement applicable à la manoeuvre manuelle des blocs-portes.
La classification des forces pour les blocs-portes ayant des systèmes à fermeture automatique enclenchés est exclue de la méthode d’essai. Les blocs-portes équipés d’une quincaillerie spéciale, par exemple des dispositifs d’issue de secours, sont également exclus de la méthode d’essai.
Les essais sont applicables aux blocs-portes, quel que soit leur matériau.
L’organe de fermeture de certaines portes vitrées (porte-fenêtre) comporte un pêne demi-tour. Ces portes vitrées peuvent être classées conformément à la présente Norme européenne.

Vrata - Sile pri uporabi - Zahteve in klasifikacija

General Information

Status
Published
Public Enquiry End Date
04-Dec-2014
Publication Date
26-May-2015
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
15-May-2015
Due Date
20-Jul-2015
Completion Date
27-May-2015

Relations

Buy Standard

Standard
EN 12217:2015
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
k FprEN 12217:2014
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Vrata - Sile pri uporabi - Zahteve in klasifikacijaTüren - Bedienungskräfte - Anforderungen und KlassifizierungPortes - Forces de manoeuvre - Prescriptions et classificationDoors - Operating forces - Requirements and classification91.060.50Vrata in oknaDoors and windowsICS:Ta slovenski standard je istoveten z:EN 12217:2015SIST EN 12217:2015en,fr,de01-julij-2015SIST EN 12217:2015SLOVENSKI
STANDARDSIST EN 12217:20041DGRPHãþD



SIST EN 12217:2015



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12217
April 2015 ICS 91.060.50 Supersedes EN 12217:2003English Version
Doors - Operating forces - Requirements and classification
Portes - Forces de manoeuvre - Prescriptions et classification
Türen - Bedienungskräfte - Anforderungen und Klassifizierung This European Standard was approved by CEN on 12 March 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12217:2015 ESIST EN 12217:2015



EN 12217:2015 (E) 2 Contents Page Foreword .3 1 Scope .4 2 Normative references .4 3 Terms and definitions .4 4 Classification .4 5 Use of historical data .5 Bibliography .6
SIST EN 12217:2015



EN 12217:2015 (E) 3 Foreword This document (EN 12217:2015) has been prepared by Technical Committee CEN/TC 33 “Doors, windows, shutters, building hardware and curtain walling”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2015, and conflicting national standards shall be withdrawn at the latest by October 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12217:2003. Compared with EN 1
...

SLOVENSKI STANDARD
kSIST FprEN 12217:2014
01-november-2014
Vrata - Sile pri uporabi - Zahteve in klasifikacija
Doors - Operating forces - Requirements and classification
Türen - Bedienungskräfte - Anforderungen und Klassifizierung
Portes - Forces de manoeuvre - Prescriptions et classification
Ta slovenski standard je istoveten z: FprEN 12217
ICS:
91.060.50 Vrata in okna Doors and windows
kSIST FprEN 12217:2014 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
kSIST FprEN 12217:2014

---------------------- Page: 2 ----------------------
kSIST FprEN 12217:2014

EUROPEAN STANDARD
FINAL DRAFT
FprEN 12217
NORME EUROPÉENNE

EUROPÄISCHE NORM

September 2014
ICS 91.060.50 Will supersede EN 12217:2003
English Version
Doors - Operating forces - Requirements and classification
Portes - Forces de manoeuvre - Prescriptions et Türen - Bedienungskräfte - Anforderungen und
classification Klassifizierung
This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical
Committee CEN/TC 33.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. FprEN 12217:2014 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
kSIST FprEN 12217:2014
FprEN 12217:2014 (E)
Contents Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Classification .4
5 Use of historical data .5

2

---------------------- Page: 4 ----------------------
kSIST FprEN 12217:2014
FprEN 12217:2014 (E)
Foreword
This document (FprEN 12217:2014) has been prepared by Technical Committee CEN/TC 33 “Wi
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.