SIST EN 16126:2012
(Main)Solid biofuels - Determination of particle size distribution of disintegrated pellets
Solid biofuels - Determination of particle size distribution of disintegrated pellets
This document aims to define the requirements and method used to determine the particle size distribution of disintegrated pellets. It is applicable for pellets, which disintegrate in hot water at a temperature below 100oC. For e.g. pellets made from torrified raw material, this method is not applicable. It is intended for persons and organisations that manufacture, plan, sell, erect or use machinery, equipment, tools and entire plants related to fuel pellets, and to all persons and organisations involved in producing, purchasing, selling and utilising fuel pellets.
Feste Biobrennstoffe - Bestimmung der Partikelgrößenverteilung von Pellet-Ausgangsmaterial
Das Ziel dieses Dokuments besteht darin, die Anforderungen und das Verfahren zur Bestimmung der Partikelgrößenverteilung von Pellet-Ausgangsmaterial festzulegen. Es gilt für Pellets, die in heißem Wasser bei einer Temperatur kleiner 100 °C entstehen. Für Pellets, die z. B. aus torrefiziertem Ausgangsmaterial hergestellt sind, gilt dieses Verfahren nicht. Dieses Dokument ist für Personen und Organisationen bestimmt, die im Zusammenhang mit Brennstoff-Pellets Maschinen, Ausrüstung, Werkzeuge und vollständige Anlagen herstellen, planen, verkaufen, montieren oder anwenden, und für alle Personen und Organisationen, die an der Herstellung, dem Einkauf, dem Verkauf und der Nutzung von Brennstoff-Pellets beteiligt sind.
Biocombustibles solides - Détermination de la distribution granulométrique des pastilles désintégrées
Le présent document a pour objet de définir les exigences et la méthode utilisée pour déterminer la distribution granulométrique des pastilles désintégrées. Il est applicable aux pastilles qui se désintègrent dans l’eau chaude à une température inférieure à 100 °C. Cette méthode n’est pas applicable aux pastilles constituées, par exemple de matériaux torréfiés. Elle s’adresse aux fabricants, concepteurs, vendeurs, installateurs et utilisateurs de matériel, d’équipement, d’outils et d’usines complètes où sont utilisées ces pastilles de combustible, ainsi qu’aux producteurs, acheteurs, vendeurs et utilisateurs de ces pastilles, qu’il s’agisse d’individus ou d’organisations
Trdna biogoriva - Ugotavljanje porazdelitve velikosti delcev razdrobljenih pelet
Cilj tega dokumenta je opredelitev zahtev in metod, ki se uporabljajo za ugotavljanje porazdelitve velikosti delcev razdrobljenih peletov. Uporablja se za pelete, ki se razdrobijo v vroči vodi pri temperaturi pod 100 C. Ta metoda se ne uporablja za npr. pelete, izdelane iz pražene surovine. Namenjena je osebam in organizacijam, ki proizvajajo, načrtujejo, prodajajo, sestavljajo ali uporabljajo stroje, opremo, orodja in celotne obrate, povezane z gorivnimi peleti, ter vsem osebam in organizacijam, ki so vključene v proizvodnjo, nabavo, prodajo in izkoriščanje gorivnih peletov.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Trdna biogoriva - Ugotavljanje porazdelitve velikosti delcev razdrobljenih peletFeste Biobrennstoffe - Bestimmung der Partikelgrößenverteilung von Pellet-AusgangsmaterialBiocombustibles solides - Détermination de la distribution granulométrique des pastilles désintégréesSolid biofuels - Determination of particle size distribution of disintegrated pellets75.160.10Trda gorivaSolid fuelsICS:Ta slovenski standard je istoveten z:EN 16126:2012SIST EN 16126:2012en,fr,de01-maj-2012SIST EN 16126:2012SLOVENSKI
STANDARD
SIST EN 16126:2012
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16126
February 2012 ICS 75.160.10 English Version
Solid biofuels - Determination of particle size distribution of disintegrated pellets
Biocombustibles solides - Détermination de la distribution granulométrique des granulés désintégrés
Feste Biobrennstoffe - Bestimmung der Partikelgrößenverteilung von Pellet-Ausgangsmaterial This European Standard was approved by CEN on 7 January 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16126:2012: ESIST EN 16126:2012
EN 16126:2012 (E) 2 Contents Page Foreword .3Introduction .41 Scope .52 Normative references .53 Terms and definitions .54 Principle .55 Reagents .56 Apparatus .56.1 Disintegration container .56.2 Electric kettle or other suitable equipment for water heating .66.3 Water measuring glass/glasses .66.4 Drying cabinet/cabinets .66.5 Drying containers .66.6 Sample reduction equipment .66.7 Balance .66.8 Sieves .66.9 Weighing containers .66.10 Spoon .66.11 Mechanical sieving equipment .66.12 Flat brush .67 Sample preparation .78 Procedure .78.1 Disintegration .78.2 Drying .78.3 Control of the moisture content .78.4 Sieving .89 Calculation .810 Precision and bias . 1011 Test report . 10Annex A (informative)
Characteristics of the determination of particle size distribution of disintegrated pellets . 11A.1 General . 11A.2 Performance characteristics on disintegration of wood pellets . 12 SIST EN 16126:2012
EN 16126:2012 (E) 3 Foreword This document (EN 16126:2012) has been prepared by Technical Committee CEN/TC 335 “Solid biofuels”, the secretariat of which is held by SIS. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2012, and conflicting national standards shall be withdrawn at the latest by August 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
SIST EN 16126:2012
EN 16126:2012 (E) 4 Introduction In coal power plants with powder fuel burners for energy production, rebuilt to use biomass powder from biofuel pellets, the operators need information on the particle size distribution in the fuel for optimising of e.g. efficiency and emission levels. The grinders used for producing fuel powder within these plants grinds the biomass pellets into the individual internal particles in the pellets. The method described in this document aims to estimate the internal particle size distribution of the material comprised in fuel pellets.
For the time being, this method is based on experience of pellets made from sawdust, wood shavings and milled wood or straw as raw material. The method may also be applicable for pellets produced from other biofuel materials. SIST EN 16126:2012
EN 16126:2012 (E) 5 1 Scope This European Standard aims at defining the requirements and method used to determine the particle size distribution of disintegrated pellets. It is applicable for pellets, which disintegrate in hot water at a temperature below 100 °C. It is intended for persons and organisations that manufacture, plan, sell, erect or use machinery, equipment, tools and entire plants related to fuel pellets, and to all persons and organisations involved in producing, purchasing, selling and utilising fuel pellets. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 14588, Solid biofuels — Terminology, definitions and descriptions
EN 14774-1, Solid biofuels — Determination of moisture content — Oven dry method — Part 1: Total moisture — Reference procedure EN 14774-2, Solid biofuels — Determination of moisture content — Oven dry method — Part 2: Total moisture — Simplified procedure EN 14778, Solid biofuels — Sampling EN 14780, Solid biofuels — Sample preparation EN 15149-2, Solid biofuels — Determination of particle size distribution. — Part 2: Vibrating screen method using sieve apertures of 3,15 mm and below 3 Terms and definitions For the purpose of this document, the terms and definitions given in EN 14588 apply. 4 Principle The particle size distribution is determined after the sample
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.