iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 60745-2-8:2003

(Main)

Hand-held motor-operated electric tools - Safety -- Part 2-8: Particular requirements for shears and nibblers

Hand-held motor-operated electric tools - Safety -- Part 2-8: Particular requirements for shears and nibblers

Deals with the safety of hand-held motor-operated or magnetically driven tools, specific requirements for shears and nibblers. The rated voltage being not more tha 250 V for single-phase a.c. or d.c., and 440 V for three-phase a.c. tools.

Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit -- Teil 2-8: Besondere Anforderungen für Blechscheren und Nibbler

Outils électroportatifs à moteur - Sécurité -- Partie 2-8: Règles particulières pour les cisailles à métaux et les grignoteuses

Traite de la sécurité des outils dont la tension assignée n'est pas supérieure à 250 V en courant  monophasé alternatif ou courant continu et 440 V en courant alternatif triphasé. Complète ou modifie les articles correspondants de la CEI 60745-1.

Električna ročna orodja - Varnost - 2-8. del: Posebne zahteve za škarje in sekalnike pločevine (IEC 60745-2-8:2003; spremenjen)

General Information

Status
Withdrawn
Publication Date
30-Nov-2003
Withdrawal Date
11-Apr-2012
ICS
25.120.10 - Forging equipment. Presses. Shears
25.140.20 - Electric tools
Technical Committee
VGA - Safety of household and similar electrical appliances
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
11-Apr-2012
Due Date
04-May-2012
Completion Date
12-Apr-2012
Directive
98/37/EC - Machinery
Ref Project
EN 60745-2-8:2003 - Hand-held motor-operated electric tools - Safety - Part 2-8: Particular requirements for shears and nibblers

Relations

Replaced By
SIST EN 60745-2-8:2009 - Hand-held motor-operated electric tools - Safety -- Part 2-8: Particular requirements for shears and nibblers
Effective Date
01-Dec-2009
Amended By
SIST EN 60745-2-8:2003/A1:2009 - Hand-held motor-operated electric tools - Safety -- Part 2-8: Particular requirements for shears and nibblers
Effective Date
01-Sep-2009
Amended By
SIST EN 60745-2-8:2003/A1:2009 - Hand-held motor-operated electric tools - Safety -- Part 2-8: Particular requirements for shears and nibblers
Effective Date
29-Jan-2023
Amended By
SIST EN 60745-2-8:2003/A11:2007 - Hand-held motor-operated electric tools - Safety -- Part 2-8: Particular requirements for shears and nibblers
Effective Date
01-Oct-2007
Amended By
SIST EN 60745-2-8:2003/A11:2007 - Hand-held motor-operated electric tools - Safety -- Part 2-8: Particular requirements for shears and nibblers
Effective Date
29-Jan-2023
Amended By
SIST EN 60745-2-8:2003/A1:2009 - Hand-held motor-operated electric tools - Safety -- Part 2-8: Particular requirements for shears and nibblers
Effective Date
07-Jun-2022
Amended By
SIST EN 60745-2-8:2003/A11:2007 - Hand-held motor-operated electric tools - Safety -- Part 2-8: Particular requirements for shears and nibblers
Effective Date
07-Jun-2022
Replaced By
SIST EN 60745-2-8:2009 - Hand-held motor-operated electric tools - Safety -- Part 2-8: Particular requirements for shears and nibblers
Effective Date
07-Jun-2022
Replaces
SIST EN 50144-2-8:1999 - Safety of hand-held electric motor operated tools -- Part 2-8: Particular requirements for sheet metal shears and nibblers
Effective Date
06-May-2014
Replaces
SIST EN 50144-2-8:1999 - Safety of hand-held electric motor operated tools -- Part 2-8: Particular requirements for sheet metal shears and nibblers
Effective Date
29-Jan-2023
Replaces
SIST EN 50144-2-8:1999 - Safety of hand-held electric motor operated tools -- Part 2-8: Particular requirements for sheet metal shears and nibblers
Effective Date
07-Jun-2022

Buy Standard

EN 60745-2-8:2003EN 60745-2-8:2003
PreviousNext
Standard
EN 60745-2-8:2003
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60745-2-8:2003
01-december-2003
1DGRPHãþD
SIST EN 50144-2-8:1999
(OHNWULþQDURþQDRURGMD9DUQRVWGHO3RVHEQH]DKWHYH]DãNDUMHLQVHNDOQLNH
SORþHYLQH ,(&VSUHPHQMHQ
Hand-held motor-operated electric tools - Safety - Part 2-8: Particular requirements for
shears and nibblers
Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 2-8: Besondere
Anforderungen für Blechscheren und Nibbler
Outils électroportatifs
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 62841-2-8:2016(Main)
Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 2-8: Particular requirements for hand-held shears and nibblers (IEC 62841-2-8:2016)
EN 62841-2-8:2016

This part of IEC 62841 applies to hand-held shears and nibblers.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12153:2023(Main)
Curtain walling - Air permeability - Test method
EN 12153:2023

This document defines the method to be used to determine the air permeability of curtain walling, both its fixed and openable parts. It describes how the specimen shall be tested under positive and negative air pressure.
NOTE   This document applies to any curtain walling product as defined in EN 13830.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST IEC 60050-811:2023/A1:2023(Amendment)
Amendment 1: International Electrotechnical Vocabulary (IEV) - Part 811: Electric traction
IEC 60050-811:2017/AMD1:2021
  • Standard
    3 pages
    English and French language
    sale 15% off
  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61340-2-3:2016/AC:2023(Corrigendum)
Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid materials used to avoid electrostatic charge accumulation (IEC 61340-2-3:2016/COR1:2023)
EN 61340-2-3:2016/AC:2023-08
  • Corrigendum
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 14002-2:2023(Main)
Environmental management systems - Guidelines for using ISO 14001 to address environmental aspects and conditions within an environmental topic area - Part 2: Water (ISO 14002-2:2023)
EN ISO 14002-2:2023

This document gives general guidelines for organizations seeking to address water-related environmental aspects, environmental impacts, environmental conditions, and the associated risks and opportunities within an environmental management system in accordance with ISO 14001.
The document addresses issues for environmental management related to water quantity and quality, such as water withdrawal, efficient use of water, and water discharge, as well as approaches to cope with water-related events such as flooding and droughts. The document considers the interconnections of water with other environmental media and takes a holistic approach to the management of water due to its impacts on ecosystems, ecosystem services, related biodiversity, as well as human life and well-being.
This document is applicable to organizations irrespective of their size, type, financial resources, location and sector. It is applicable to all types of water and considers a life cycle perspective.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST IEC 60050-811:2023(Main)
International Electrotechnical Vocabulary (IEV) - Part 811: Electric traction
IEC 60050-811:2017

IEC 60050-811:2017 gives the general terminology relating to electric traction used in electrical equipment and systems for railways, as well as general terms pertaining to specific applications and associated technologies. This new edition reviews and complements the previous one. This terminology is consistent with the terminology developed in the other specialized parts of the IEV.
It has the status of a horizontal standard in accordance with IEC Guide 108.

  • Standard
    626 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    612 pages
    English and French language
    sale 15% off
SIST
SIST EN IEC 60721-3-4:2019/AC:2023(Corrigendum)
Classification of environmental conditions - Part 3-4: Classification of groups of environmental parameters and their severities - Stationary use at non-weatherprotected locations (IEC 60721-3-4:2019/COR1:2023)
EN IEC 60721-3-4:2019/AC:2023-08
  • Corrigendum
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 301 406-2 V3.1.1:2023(Main)
Digital Enhanced Cordless Telecommunications (DECT) - Harmonised Standard for access to radio spectrum - Part 2: DECT-2020 NR
ETSI EN 301 406-2 V3.1.1 (2023-08)

DEN/DECT-00359-2

  • Standard
    76 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    76 pages
    English language
    sale 15% off
  • Standard
    76 pages
    English language
    sale 15% off
  • Draft
    76 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN ISO/TS 16486-7:2023(Main)
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 7: Assessment of conformity (ISO/TS 16486-7:2023)
CEN ISO/TS 16486-7:2023

This document gives guidance and requirements for the assessment of conformity of compounds, products, joints and assemblies in accordance with the applicable part(s) of the ISO 16486 series which are intended to be included in the manufacturer’s quality plan as part of the quality management system and for the establishment of certification procedures.
NOTE 1    A basic test matrix in Annex B provides an overview of the testing scheme.
It is recommended for the manufacturer to have a management system such as ISO 9001[4] or equivalent.
NOTE 2    If certification is involved, certification bodies and inspection bodies operating according to ISO/IEC 17065 and ISO/IEC 17020 are considered to be competent.
In conjunction with the other parts of the ISO 16486 series (see Clause 2), this document is applicable to unplasticized polyamide (PA-U) piping systems intended to be buried and used for the supply of gaseous fuels. It is applicable to PA-U pipes, fittings and valves, as well as to their joints and to joints with components of other materials intended to be used under the following conditions:
a)    a maximum operating pressure (MOP) up to and including 18 bar[1] (the MOP is limited to 16 bar for CEN member countries, where ISO 16486-6 is replaced by CEN/TS 12007-6[1]);
b)    an operating temperature of 20 °C as the reference temperature.
NOTE 3    For operating temperatures different to 20 °C, derating coefficients can be used (see ISO 16486-6). CEN member countries use CEN/TS 12007-6[1] and ISO/TS 16486-7 (this document) as a basis, but they can also request additional requirements. For non-CEN member countries, information for dealing with special cases for PA-U can be found in ISO/TS 16486-7 (this document) and PPI TR-3.[7]
For mechanical fittings conforming to ISO 17885, guidance for assessment of conformity is not given in this document. When requested, a quality plan based on the tests mentioned can be set up in agreement between user and manufacturer.
The ISO 16486 series covers a range of maximum operating pressures and gives requirements concerning colours.
NOTE 4    It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and any relevant national regulations and installation practices or codes.
[1] 1 bar = 0,1 MPa = 105 Pa; 1 MPa = 1 N/mm2.

  • Technical specification
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 1089:2023(Main)
Resistance welding equipment - Electrode taper fits for spot welding equipment - Dimensions (ISO 1089:2023)
EN ISO 1089:2023

Refers to taper dimensions and tolerances for electrode caps, electrode adaptors, electrode holders and similar parts, where the electrode force Fmax, given for diameter d1 in tables 1, 2 and 3 is not exceeded. Establishes dimensions, designation and marking. Cancels and replaces ISO Recommendation R 1089-1969, of which it constitutes a technical revision.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day