SIST EN 16168:2013
(Main)Sludge, treated biowaste and soil - Determination of total nitrogen using dry combustion method
Sludge, treated biowaste and soil - Determination of total nitrogen using dry combustion method
This European Standard specifies the determination of total nitrogen (organic and inorganic) according to the procedure of Dumas in sludge, treated biowaste and soil. A typical limit of detection is 0,02 % nitrogen, and a typical limit of quantification is 0,08 % nitrogen.
Schlamm, behandelter Bioabfall und Boden - Bestimmung des Gesamt-Stickstoffgehalts mittels trockener Verbrennung
Diese Europäische Norm legt das von Dumas entwickelte Verfahren zur Bestimmung des Gesamt-Stickstoffs (organisch und anorganisch) in Schlamm, behandeltem Bioabfall und Boden fest. Eine typische Nachweisgrenze liegt bei 0,02 % Stickstoff und eine typische Bestimmungsgrenze liegt bei 0,08 % Stickstoff.
Boue, biodéchet traité et sol - Détermination de la teneur totale en azote par combustion sèche
La présente Norme européenne spécifie la détermination de la teneur totale en azote (organique et inorganique) selon le mode opératoire de Dumas dans les boues, les biodéchets traités et les sols. La limite de détection type est 0,02 % d'azote, et La limite de quantification type est 0,08 % d'azote.
Blato, obdelani biološki odpadki in tla - Določevanje celotnega dušika z metodo suhega sežiga
Ta evropski standard opredeljuje določevanje celotnega (organskega in anorganskega) dušika v skladu z Dumasovo metodo v blatu, obdelanih bioloških odpadkih in tleh. Običajna meja detekcije je 0,02 % dušika, meja kvantifikacije pa 0,08 % dušika.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Schlamm, behandelter Bioabfall und Boden - Bestimmung des Gesamt-Stickstoffgehalts mittels trockener VerbrennungBoue, biodéchet traité et sol - Détermination de la teneur totale en azote par combustion sècheSludge, treated biowaste and soil - Determination of total nitrogen using dry combustion method13.080.10Chemical characteristics of soils13.030.20Liquid wastes. SludgeICS:Ta slovenski standard je istoveten z:EN 16168:2012SIST EN 16168:2013en,fr,de01-februar-2013SIST EN 16168:2013SLOVENSKI
STANDARD
SIST EN 16168:2013
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16168
August 2012 ICS 13.030.01; 13.080.10 English Version
Sludge, treated biowaste and soil - Determination of total nitrogen using dry combustion method
Boues, biodéchets traités et sols - Détermination de la teneur totale en azote par combustion sèche
Schlamm, behandelter Bioabfall und Boden - Bestimmung des Gesamt-Stickstoffgehalts mittels trockener Verbrennung This European Standard was approved by CEN on 24 May 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16168:2012: ESIST EN 16168:2013
EN 16168:2012 (E) 2 Contents Page Foreword .3Introduction .41 Scope .52 Normative references .53 Terms and definitions .54 Principle .55 Interferences and sources of errors .56 Reagents .67 Apparatus .68 Sample storage and sample pretreatment .69 Procedure .69.1 General .69.2 Confirmation of calibration .79.3 Blank test .79.4 Determination of total nitrogen content .710 Calculation .711 Expression of results .812 Precision .813 Test report .8Annex A (informative)
Repeatability and reproducibility data .9A.1 Materials used in the interlaboratory comparison study .9A.2 Interlaboratory comparison results . 10Bibliography . 11 SIST EN 16168:2013
EN 16168:2012 (E) 3 Foreword This document (EN 16168:2012) has been prepared by Technical Committee CEN/TC 400 “Project Committee - Horizontal standards in the fields of sludge, biowaste and soil”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2013, and conflicting national standards shall be withdrawn at the latest by February 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. The preparation of this document by CEN is based on a mandate by the European Commission (Mandate M/330), which assigned the development of standards on sampling and analytical methods for hygienic and biological parameters as well as inorganic and organic determinants, aiming to make these standards applicable to sludge, treated biowaste and soil as far as this is technically feasible. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
SIST EN 16168:2013
EN 16168:2012 (E) 4 Introduction This European Standard is applicable and validated for several types of matrices as indicated in Table 1 (see also Annex A for the results of the validation). Table 1 — Matrices for which this European Standard is applicable and validated Matrix Materials used for validation Sludge Municipal sludge Biowaste Fresh compost Compost Soil Sludge amended soil Agricultural soil
WARNING — Persons using this European Standard should be familiar with usual laboratory practice. This European Standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any national regulatory conditions. IMPORTANT — It is absolutely essential that tests conducted according to this European Standard be carried out by suitably trained staff.
SIST EN 16168:2013
EN 16168:2012 (E) 5 1 Scope This European Standard specifies the determination of total nitrogen (organic and inorganic) according to the procedure of Dumas in sludge, treated biowaste and soil. A typical limit of detection is 0,02 % nitrogen, and a typical limit of quantification is 0,08 % nitrogen. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 15934, Sludge, treated biowaste, soil and waste — Calculation of dry matter fraction after determination of dry residue or water content EN 16179, Sludge, treated biowaste and soil — Guidance for sample pretreatment EN ISO 3696, Water for analytical laboratory use — Specification and test methods (ISO 3696) EN ISO 5667-15, Water quality — Sampling — Part 15: Guidance on the preservation and handling of sludge and sediment samples (ISO 5667-15) ISO 18512, Soil quality — Guidance on long and short term storage of soil samples 3 Terms and definitions For the purposes of this document
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.