SIST EN IEC 62836-216:2018

Digital addressable lighting interface - Part 216: Particular requirements for control gear - Load referencing (device type 15) (IEC 62386-216:2018)

IEC 62386-216:2018 specifies a bus system for control by digital signals of electronic lighting equipment which is in line with the requirements of IEC 61347 (all parts), with the addition of DC supplies.

Digital adressierbare Schnittstelle für die Beleuchtung - Teil 216: Anforderungen für Betriebsgeräte - Last-Referenzierung (Gerätetyp 15)

Interface d’éclairage adressable numérique - Partie 216: Exigences particulières pour les appareillages de commande - Référence de charge (dispositifs de type 15)

L’IEC 62386-216:2018 spécifie un système à bus pour la commande par des signaux numériques des appareils d'éclairage électroniques conformes aux exigences de l'IEC 61347 (toutes les parties), en ajoutant les alimentations en courant continu.

Digitalni naslovljivi vmesnik za razsvetljavo - 216. del: Posebne zahteve za krmilja - Navedba obremenitve (naprava tipa 15) (IEC 62386-216:2018)

General Information

• Status: Published
• Publication Date: 08-Jul-2018
• ICS: 29.140.50 - Lighting installation systems
• ICS: 35.200 - Interface and interconnection equipment
• Technical Committee: IESV - Lamps and related equipment
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 02-Jul-2018
• Due Date: 06-Sep-2018
• Completion Date: 09-Jul-2018
• Ref Project: EN IEC 62386-216:2018 - Digital addressable lighting interface - Part 216: Particular requirements for control gear - Load referencing (device type 15)

Overview

EN IEC 62386-216:2018 (also published as IEC 62386-216:2018) is part of the IEC/CENELEC Digital Addressable Lighting Interface (DALI) series. It defines particular requirements for control gear implementing load referencing (device type 15). The standard specifies a bus system for digital control of electronic lighting equipment, aligned with IEC 61347 (all parts) and extended to include DC supplies. EN IEC 62386-216:2018 is intended to be used together with the general requirements in IEC 62386-101 and IEC 62386-102.

Key topics and technical requirements

This part 216 focuses on device-specific behavior and communication needed for reliable load referencing. Major technical topics included are:

• Scope and applicability: control gear that implements load referencing in accordance with IEC 62386-102.
• Electrical specification: interface electrical requirements for device type 15.
• Interface power supply: power behaviour and supply considerations for the bus and devices.
• Transmission protocol structure and timing: messaging format and timing constraints necessary for interoperability.
• Method of operation:
  • Reference measurement procedures used for load referencing.
  • Load referencing mechanisms specific to device type 15.
  • Load deviation handling and thresholds.
  • Failure status reporting and classification.
• Declaration of variables and the definition of commands, including application extended commands and special commands (for example, enabling device type data).
• Normative references to related parts of the IEC 62386 series and harmonized standards.

(These topics reflect the clause structure and requirements contained in the standard; implementers should consult the full text for exact command formats and variable definitions.)

Applications and who uses this standard

EN IEC 62386-216:2018 is applied in:

• Control gear manufacturers who design DALI-compliant devices with load-referencing features (device type 15).
• Lighting system designers and integrators specifying interoperable digital lighting controls in commercial, industrial, and architectural projects.
• Product compliance and test laboratories validating conformity with DALI/IEC 62386 requirements.
• Building automation engineers and OEMs integrating lighting control into broader control systems where accurate load referencing and DC supply support are required.

Benefits include consistent interoperability, predictable failure reporting, and standardized communication for load-referenced control gear.

Related standards

• IEC 62386-101 – General requirements: system components
• IEC 62386-102 – General requirements: control gear (required companion)
• IEC 61347 – Lamp control gear safety standards (harmonized reference)
• EN IEC 62386-216:2018 is the CENELEC-adopted version of IEC 62386-216:2018.

For implementation and compliance, consult the full EN IEC 62386-216:2018 document and referenced parts in the IEC 62386 series.

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Digitalni naslovljivi vmesnik za razsvetljavo - 216. del: Posebne zahteve za krmilja - Navedba obremenitve (naprava tipa 15) (IEC 62386-216:2018)Digital addressable lighting interface - Part 216: Particular requirements for control gear - Load referencing (device type 15) (IEC 62386-216:2018)35.200Vmesniška in povezovalna opremaInterface and interconnection equipment29.140.50Instalacijski sistemi za razsvetljavoLighting installation systemsICS:Ta slovenski standard je istoveten z:EN IEC 62386-216:2018SIST EN IEC 62836-216:2018en01-september-2018SIST EN IEC 62836-216:2018SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN IEC 62386-216
June 2018 ICS 29.140.50; 29.140.99
English Version
Digital addressable lighting interface - Part 216: Particular requirements for control gear - Load referencing (device type 15) (IEC 62386-216:2018)
Interface d'éclairage adressable numérique - Partie 216: Exigences particulières pour les appareillages de commande - Référence de charge (dispositifs de type 15) (IEC 62386-216:2018)
Digital adressierbare Schnittstelle für die Beleuchtung - Teil 216: Anforderungen für Betriebsgeräte - Last-Referenzierung (Gerätetyp 15) (IEC 62386-216:2018) This European Standard was approved by CENELEC on 2018-05-28. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23,
B-1040 Brussels © 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62386-216:2018 E SIST EN IEC 62836-216:2018

Normative references to international publications with their corresponding European publications The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu.
Publication Year Title EN/HD Year IEC 62386-101 2014
Digital addressable lighting interface - Part 101: General requirements - System components
EN 62386-101 2014
+ A11 -
+ A12 -
IEC 62386-102 2014
Digital addressable lighting interface - Part 102: General requirements - Control gear
EN 62386-102 2014
+ A13 -
+ A14 -
1 Under preparation. Stage at the time of publication: IEC CCDV 62386-101/AMD1:2018. 2 Under preparation. Stage at the time of publication: EN 62386-101:2014/prA1:2017. 3 Under preparation. Stage at the time of publication: IEC CCDV 62386-102/AMD1:2018. 4 Under preparation. Stage at the time of publication: EN 62386-102:2014/FprA1:2018. SIST EN IEC 62836-216:2018

IEC 62386-216 Edition 1.0 2018-04 INTERNATIONAL STANDARD NORME INTERNATIONALE Digital addressable lighting interface –
Part 216: Particular requirements for control gear – Load referencing
(device type 15)
Interface d’éclairage adressable numérique –
Partie 216: Exigences particulières pour les appareillages de commande – Référence de charge (dispositifs de type 15)
INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE
ICS 29.140.50; 29.140.99
ISBN 978-2-8322-5613-8
– 2 – IEC 62386-216:2018 © IEC 2018 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope . 7 2 Normative references . 7 3 Terms and definitions . 7 4 General . 8 4.1 General . 8 4.2 Version number . 8 5 Electrical specification . 8 6 Interface power supply . 8 7 Transmission protocol structure . 8 8 Timing . 8 9 Method of operation . 8 9.1 General . 8 9.2 Reference measurement . 8 9.3 Load referencing . 9 9.4 Load deviation . 10 9.5 Failure status . 10 10 Declaration of variables . 11 11 Definition of commands . 11 11.1 General . 11 11.2 Overview sheets . 11 11.3 Application extended commands . 12 11.3.1 General . 12 11.3.2 Configuration instructions . 12 11.3.3 Queries. 12 11.4 Special commands . 13 11.4.1 General . 13 11.4.2 ENABLE DEVICE TYPE (data) . 13 Bibliography . 14
Figure 1 – IEC 62386 graphical overview . 5
Table 1 – Control gear failure status . 10 Table 2 – Declaration of variables . 11 Table 3 – Application extended commands for this device type . 12
IEC 62386-216:2018 © IEC 2018 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________
DIGITAL ADDRESSABLE LIGHTING INTERFACE –
Part 216: Particular requirements for control gear –
Load referencing (device type 15)
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62386-216 has been prepared by IEC technical committee 34: Lamps and related equipment. The text of this International Standard is based on the following documents: FDIS Report on voting 34/491/FDIS 34/513/RVD
Full information on the voting for the approval of this International Standard can be found in the report on voting indicated in the above table. This document has been drafted in accordance with the ISO/IEC Directives, Part 2. SIST EN IEC 62836-216:2018

– 4 – IEC 62386-216:2018 © IEC 2018 This Part 216 of IEC 62386 is intended to be used in conjunction with: • Part 101, which contains general requirements for system components; • Part 102, which contains general requirements for control gear. A list of all parts in the IEC 62386 series, published under the general title: Digital addressable lighting interface, can be found on the IEC website. The committee has decided that the contents of this document will remain unchanged until the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data related to the specific document. At this date, the document will be • reconfirmed, • withdrawn, • replaced by a revised edition, or • amended.
IMPORTANT – The 'colour inside' l
...