SIST EN 60317-68:2017/A2:2024

Specifications for particular types of winding wires - Part 68: Polyvinyl acetal enamelled rectangular aluminium wire, class 120 (IEC 60317-68:2017/AMD2:2024)

Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 68: Flachdrähte aus Aluminium, lackisoliert mit Polyvinylacetal Klasse 120 (IEC 60317-68:2017/AMD2:2024)

Spécifications pour types particuliers de fils de bobinage - Partie 68: Fil d’aluminium de section rectangulaire émaillé d’acétal de polyvinyle, classe 120 (IEC 60317-68:2017/AMD2:2024)

Specifikacije za posebne vrste navijalnih žic - 68. del: Aluminijasta žica s pravokotnim prerezom, emajlirana s polivinil acetalom, razred 120 - Dopolnilo A2 (IEC 60317-68:2017/AMD2:2024)

General Information

• Status: Published
• Public Enquiry End Date: 30-Oct-2023
• Publication Date: 18-Aug-2024
• ICS: 29.060.10 - Wires
• ICS: 77.150.10 - Aluminium products
• Technical Committee: I09 - Imaginarni 09
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 07-Aug-2024
• Due Date: 12-Oct-2024
• Completion Date: 19-Aug-2024
• Ref Project: EN 60317-68:2017/A2:2024 - Specifications for particular types of winding wires - Part 68: Polyvinyl acetal enamelled rectangular aluminium wire, class 120

Relations

• Amends: SIST EN 60317-68:2017 - Specifications for particular types of winding wires - Part 68: Polyvinyl acetal enamelled rectangular aluminium wire, class 120 (IEC 60317-68:2017)
• Effective Date: 01-Sep-2024

Overview

EN 60317-68:2017/A2:2024 (IEC 60317-68:2017/AMD2:2024) is the CENELEC amendment that updates specifications for polyvinyl acetal enamelled rectangular aluminium wire, class 120. Published August 2024 and approved 2024‑07‑19, this amendment A2 is to be used together with the general requirements in IEC 60317-0-9:2015 and its Amendment 1:2024. It formalizes test method references and editorial changes for manufacturers, test laboratories and users of enamelled rectangular aluminium winding wire.

Key topics and requirements

• Scope: Applies to particular types of winding wires - specifically rectangular aluminium conductors enamelled with polyvinyl acetal, designated class 120 (thermal class designation used in winding wire standards).
• Normative references: Incorporates IEC 60317-0-9:2015 and IEC 60317-0-9:2015/AMD1:2024 for general requirements and refers to IEC 60851-4:2016 for chemical test methods.
• Test and measurement rules:
  • The amendment clarifies that clause 5 (electrical resistance) of IEC 60317-0-9 and its AMD1 applies to this part.
  • It updates methods of test to align with the parent document (IEC 60317-0-9) and specifies that certain tests (e.g., springiness) are considered not applicable for this wire type.
• Interplay with international and European standards: EN adoption is identical to the IEC amendment; national bodies must implement by dates specified (latest implementation date 2025‑04‑19, withdrawal of conflicting standards by 2027‑07‑19).

Applications and who uses it

• Manufacturers of enamelled rectangular aluminium wire use this standard to ensure product conformity, specify insulation systems, and define test regimes.
• Design engineers (motors, transformers, inductors, coils) reference the standard when selecting rectangular aluminium winding wire with polyvinyl acetal enamel for electrical machines and components.
• Quality assurance and testing laboratories apply the referenced IEC test methods (chemical and electrical) to verify material and insulation properties.
• Procurement and compliance teams use the standard to create purchase specifications and to confirm regulatory alignment across Europe.

Related standards

• IEC 60317-0-9:2015 - General requirements for enamelled rectangular aluminium wire (including AMD1:2024)
• IEC 60851-4:2016 - Winding wires - Test methods - Part 4: Chemical properties

Keywords: polyvinyl acetal enamelled rectangular aluminium wire, EN 60317-68:2017/A2:2024, IEC 60317-68, class 120, winding wires, enamelled wire specifications, test methods.

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2024
Specifikacije za posebne vrste navijalnih žic - 68. del: Aluminijasta žica s
pravokotnim prerezom, emajlirana s polivinil acetalom, razred 120 - Dopolnilo A2
(IEC 60317-68:2017/AMD2:2024)
Specifications for particular types of winding wires - Part 68: Polyvinyl acetal enamelled
rectangular aluminium wire, class 120 (IEC 60317-68:2017/AMD2:2024)
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 68:
Flachdrähte aus Aluminium, lackisoliert mit Polyvinylacetal Klasse 120 (IEC 60317-
68:2017/AMD2:2024)
Spécifications pour types particuliers de fils de bobinage - Partie 68: Fil d’aluminium de
section rectangulaire émaillé d’acétal de polyvinyle, classe 120 (IEC 60317-
68:2017/AMD2:2024)
Ta slovenski standard je istoveten z: EN 60317-68:2017/A2:2024
ICS:
29.060.10 Žice Wires
77.150.10 Aluminijski izdelki Aluminium products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60317-68:2017/A2

NORME EUROPÉENNE
EUROPÄISCHE NORM August 2024
ICS 29.060.10
English Version
Specifications for particular types of winding wires - Part 68:
Polyvinyl acetal enamelled rectangular aluminium wire, class
(IEC 60317-68:2017/AMD2:2024)
Spécifications pour types particuliers de fils de bobinage - Technische Lieferbedingungen für bestimmte Typen von
Partie 68: Fil d'aluminium de section rectangulaire émaillé Wickeldrähten - Teil 68: Flachdrähte aus Aluminium,
d'acétal de polyvinyle, classe 120 lackisoliert mit Polyvinylacetal Klasse 120
(IEC 60317-68:2017/AMD2:2024) (IEC 60317-68:2017/AMD2:2024)
This amendment A2 modifies the European Standard EN 60317-68:2017; it was approved by CENELEC on 2024-07-19. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60317-68:2017/A2:2024 E

European foreword
The text of document 55/1998/CDV, future IEC 60317-68/AMD2, prepared by IEC/TC 55 "Winding
wires" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60317-
68:2017/A2:2024.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2025-04-19
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-07-19
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60317-68:2017/AMD2:2024 was approved by CENELEC as
a European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Replace the references with:
Publication Year Title EN/HD Year
IEC 60317-0-9 2015 Specifications for particular types of EN 60317-0-9 2015
winding wires - Part 0-9: General
requirements - Enamelled rectangular
aluminium wire
+ AMD1 2024 +A1 2024
IEC 60851-4 2016 Winding wires - Test methods - Part 4: EN 60851-4 2016
Chemical properties
IEC 60317-68 ®
Edition 1.0 2024-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 2
AMENDEMENT 2
Specifications for particular types of winding wires –

Part 68: Polyvinyl acetal enamelled rectangular aluminium wire, class 120

Spécifications pour types particuliers de fils de bobinage –

Partie 68: Fil d’aluminium de section rectangulaire émaillé d’acétal de

polyvinyle, classe 120
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.060.10  ISBN 978-2-8322-9052-1
...