SIST EN 60519-9:2006

Safety in electroheat installations -- Part 9: Particular requirements for high-frequency dielectric heating installations

This part of IEC 60519 is applicable to industrial high-frequency dielectric heating installations for the purpose of thermal applications such as melting, drying, welding, insect extermination and gluing of partially or non-conductive materials such as plastics, wood, rubber, textiles, glass, ceramic, paper, bamboo, foodstuffs, etc. in both normal and protective atmospheres, using for example inert gases or vacuum. This standard relates to high-frequency dielectric heating installations with nominal frequency in the range from 1 MHz to 300 MHz with rated useful output power greater than 50 W. NOTE In accordance with CISPR 11, there are preferred frequencies designated by the International Telecommunication Union for use as fundamental ISM frequencies. The voltage band according to IEC 60519-1 relates to the mains supply voltage. In some circuits of the dielectric heating installation, the d.c., a.c. or radio-frequency voltages can have greater values (e.g. in the generator due to a built-in transformer).

Sicherheit in Elektrowärmeanlagen -- Teil 9: Besondere Anforderungen an kapazitive Hochfrequenz-Erwärmungsanlagen

Sécurité dans les installations électrothermiques -- Partie 9: Exigences particulières pour les installations de chauffage diélectrique à haute fréquence

S'applique aux installations industrielles de chauffage diélectrique à haute fréquence pour des applications thermiques telles que la fusion, le séchage, le soudage, l'éradication des insectes et le collage de matériaux partiellement conducteurs ou non conducteurs (plastiques, bois, etc.) à la fois en atmosphères normale et de protection, en utilisant par exemple des gaz inertes ou le vide. Traite des installations de chauffage diélectrique à haute fréquence de fréquence nominale dans le domaine de 1 MHz à 300 MHz et de puissance de sortie utile supérieure à 50 W. Est à utiliser conjointement avec la EN 60519-1.

Varnost pri električnih grelnih inštalacijah – 9. del: Posebne zahteve za inštalacije za visokofrekvenčno dielektrično gretje (IEC 60519-9:2005)

General Information

• Status: Published
• Publication Date: 31-Jan-2006
• ICS: 25.180.10 - Electric furnaces
• Technical Committee: I09 - Imaginarni 09
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Feb-2006
• Due Date: 01-Feb-2006
• Completion Date: 01-Feb-2006
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Directive: 73/23/EEC - Electrical equipment designed for use within certain voltage limits
• Ref Project: EN 60519-9:2005 - Safety in electroheat installations - Part 9: Particular requirements for high-frequency dielectric heating installations

Relations

• Replaced By: SIST EN 60519-9:1999 - Safety in electroheat installations -- Part 9: Particular requirements for high-frequency dielectric heating installations
• Effective Date: 01-Oct-2008
• Replaces: SIST EN 60519-9:1999 - Safety in electroheat installations -- Part 9: Particular requirements for high-frequency dielectric heating installations
• Effective Date: 29-Jan-2023
• Replaces: SIST EN 60519-9:1999 - Safety in electroheat installations -- Part 9: Particular requirements for high-frequency dielectric heating installations
• Effective Date: 06-May-2014

Standards Content (Sample)

SLOVENSKI SIST EN 60519-9:2006

STANDARD
februar 2006
Varnost pri električnih grelnih inštalacijah – 9. del: Posebne zahteve za
inštalacije za visokofrekvenčno dielektrično gretje (IEC 60519-9:2005)
Safety in electroheat installations – Part 9: Particular requirements for high-
frequency dielectric heating installations (IEC 60519-9:2005)
ICS 25.180.10 Referenčna številka
SIST EN 60519-9:2006(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 60519-9
NORME EUROPÉENNE
EUROPÄISCHE NORM November 2005

ICS 25.180.10 Supersedes EN 60519-9:1995


English version


Safety in electroheat installations
Part 9: Particular requirements for high-frequency
dielectric heating installations
(IEC 60519-9:2005)


Sécurité dans les installations Sicherheit in Elektrowärmeanlagen
électrothermiques Teil 9: Besondere Anforderungen
Partie 9: Exigences particulières an kapazitive Hochfrequenz-
pour les installations de chauffage Erwärmungsanlagen
diélectrique à haute fréquence (IEC 60519-9:2005)
(CEI 60519-9:2005)






This European Standard was approved by CENELEC on 2005-10-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60519-9:2005 E

---------------------- Page: 2 ----------------------

EN 60519-9:2005 - 2 -
Foreword
The text of document 27/473/FDIS, future edition 2 of IEC 60519-9, prepared by IEC TC 27, Industrial
electroheating equipment, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 60519-9 on 2005-10-01.
This part of EN 60519 is to be used in conjunction EN 60519-1:2003. It is intended to specify particular
requirements for high-frequency dielectric heating installations.
This European Standard supersedes EN 60519-9:1995.
The significant changes with respect to EN 60519-9:1995 are as follows:
– requirements for the protection against direct contact have been revised;
– the structure has been adjusted to the latest ISO/IEC Directives, in particular the scope, object
and introduction of normative references;
– definitions have been brought into line with 60050-841:2004.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2006-07-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2008-10-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60519-9:2005 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60204-1 NOTE Harmonized as EN 60204-1:1997 (not modified).
__________

---------------------- Page: 3 ----------------------

- 3 - EN 60519-9:2005
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1)
IEC 60050-841 - International electrotechnical vocabulary - -
Part 841: Industrial electroheat

IEC 60519-1 2003 Safety in electroheat installations EN 60519-1 2003
Part 1: General requirements





1)
Undated reference.

---------------------- Page: 4 ----------------------

NORME CEI
INTERNATIONALE
IEC



60519-9
INTERNATIONAL


Deuxième édition
STANDARD

Second edition

2005-08


Sécurité dans les installations
électrothermiques –
Partie 9:
Exigences particulières pour les installations
de chauffage diélectrique à haute fréquence

Safety in electroheat installations –
Part 9:
Particular requirements for high-frequency
dielectric heating installations
 IEC 2005 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
CODE PRIX
M
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

---------------------- Page: 5 ----------------------

60519-9  IEC:2005 – 3 –
CONTENTS

FOREWORD.5

1 Scope and object.9
2 Normative references .9
3 Terms and definitions .9
4 Protective measures in the dielectric heating generator .11
4.1 General description .11
4.2 Protection against direct contact .11
4.2.1 General .11
4.2.2 Means of access to parts under voltage band 2 .11
4.2.3 Means of access to parts under voltage band 3 .11
4.2.4 Means of access to parts under high-frequency voltage.13
4.2.5 Warning plates .13
4.3 Other protective measures .13
4.4 Temperature rise – Protection against fire .15
4.5 Clearances and creepage distances .15
4.6 Internal electrical connections .15
4.7 Capacitors.15
4.8 Cooling.17
4.9 Overload protection .17
4.10 Radio interference suppression .17
5 Protective measures for use in dielectric applicators.19
5.1 Moving devices containing mechanical parts .19
5.2 Processing charge of flammable substances .19
5.3 Protection against indirect contact.19
5.4 Other protective measures .21
6 Tests for protective measures.21
7 Marking .23

Bibliography.25

---------------------- Page: 6 ----------------------

60519-9  IEC:2005 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

SAFETY IN ELECTROHEAT INSTALLATIONS –

Part 9: Particular requirements for high-frequency
dielectric heating installations


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60519-9 has been prepared by IEC technical committee 27:
Industrial electroheating equipment.
IEC 60519-9 is to be used in conjunction with the third edition of IEC 60519-1. It is intended to
specify particular requirements for high-frequency dielectric heating installations.
This second edition cancels and replaces the first edition published in 1987 and constitutes a
technical revision. The significant changes with respect to the previous edition are as follows:
– requirements for the protection against direct contact have been revised;
– the structure has been adjusted to the latest ISO/IEC Directives, in particular the scope,
object and introduction of normative references;

---------------------- Page: 7 ----------------------

60519-9  IEC:2005 – 7 –
– the third edition of IEC 60519-1 has been taken into account;
– definitions have been brought into line with the second edition of IEC 60050-841.
The text of this standard is based on the following documents:
FDIS Report on voting
27/473/FDIS 27/493/RVD

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
IEC 60519 consists of the following parts, under the general title Safety in electroheat
installations:
Part 1: General requirements
Part 2: Particular requirements for resistance heating equipment
Part 3: Particular requirements for induction and conduction heating and induction melting
installations
Part 4: Particular requirements for arc furnace installations
Part 5: Specifications for safety in plasma installations
Part 6: Specifications for safety in industrial microwave heating equipment
Part 7: Particular requirements for installations with electron guns
Part 8: Particular requirements for electroslag remelting furnaces
Part 9: Particular requirements for high-frequency dielectric heating installations
Part 10: Particular requirements for electrical resistance trace heating systems for industrial
and commercial applications
Part 11: Particular requirements for installations for electromagnetic stirring, transport or
pouring of metal liquids
Part 21: Particular requirements for resistance heating equipment – Heating and melting
glass equipment
NOTE If necessary, additional parts covering particular industrial electroheat equipment may be prepared.
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.

---------------------- Page: 8 ----------------------

60519-9  IEC:2005 – 9 –
SAFETY IN ELECTROHEAT INSTALLATIONS –

Part 9: Particular requirements for high-frequency
dielectric heating installations



1 Scope and object
This part of IEC 60519 is applicable to industrial high-frequency dielectric heating installations
for the purpose of thermal applications such as melting, drying, welding, insect extermination
and gluing of partially or non-conductive materials such as plastics, wood, rubber, textiles,
glass, ceramic, paper, bamboo, foodstuffs, etc. in both normal and protective atmospheres,
using for example inert gases or vacuum.
This standard relates to high-frequency dielectric heating installations with nominal frequency
in the range from 1 MHz to 300 MHz with rated useful output power greater than 50 W.
NOTE In accordance with CISPR 11, there are preferred frequencies designated by the International
Telecommunication Union for use as fundamental ISM frequencies.
The voltage band according to IEC 60519-1 relates to the mains supply voltage. In some
circuits of the dielectric heating installation, the d.c., a.c. or radio-frequency voltages can
have greater values (e.g. in the generator due to a built-in transformer).
2 Normative references
The following referenced documents are indispensable for the application of this document.
For dated references, only the edition citied applies. For undated references, the latest edition
of the referenced document (including any amendments) applies.
IEC 60050-841, International Electrotechnical Vocabulary – Part 841: Industrial electroheat
IEC 60519-1:2003, Safety in electroheat installations – Part 1: General requirements
3 Terms and definitions
For the purposes of this document terms and definitions given in IEC 60050-841 and the
following apply.
3.1
dielectric heating installation
installation compri
...