Analogue pneumatic signal for process control systems

Applies to analogue pneumatic signals used in process control systems to transmit information between the elements of systems and gives definitions, units and the recommended value of the range of the analogue pneumatic signal.

Analoges Pneumatik-Signal für Prozeß-, Meß-, Steuer- und Regeleinrichtungen

Signal analogique pneumatique pour des systèmes de conduite de processus

S'applique aux signaux analogiques pneumatiques utilisés dans des systèmes de conduite de processus pour la transmission de données entre les éléments de systèmes et donne la terminologie, les unités et la valeur recommandée de l'étendue de signal analogique pneumatique.

Analogue pneumatic signal for process control systems (IEC 60382:1991)

General Information

Status
Published
Publication Date
31-Oct-1998
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Nov-1998
Due Date
01-Nov-1998
Completion Date
01-Nov-1998

Buy Standard

Standard
EN 60382:1998
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60382:1998
01-november-1998
Analogue pneumatic signal for process control systems (IEC 60382:1991)
Analogue pneumatic signal for process control systems
Analoges Pneumatik-Signal für Prozeß-, Meß-, Steuer- und Regeleinrichtungen
Signal analogique pneumatique pour des systèmes de conduite de processus
Ta slovenski standard je istoveten z: EN 60382:1993
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
SIST EN 60382:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60382:1998

---------------------- Page: 2 ----------------------

SIST EN 60382:1998

---------------------- Page: 3 ----------------------

SIST EN 60382:1998

---------------------- Page: 4 ----------------------

SIST EN 60382:1998

---------------------- Page: 5 ----------------------

SIST EN 60382:1998

---------------------- Page: 6 ----------------------

SIST EN 60382:1998
CEI
NORME
IEC
INTERNATIONALE
382
INTERNATIONAL
Deuxième édition
STAN DARD
Second edition
1991-11
Signal analogique pneumatique pour
des systèmes de conduite de processus
Analogue pneumatic signal for
process control systems
© CEI 1991 Droits de reproduction réservés — Copyright – all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized
utilisée sous quelque forme que ce soit et par aucun procédé, in any form or by any means, electronic or mechanical,
électronique ou mécanique, y compris la photocopie et les including photocopying and microfilm, without permission
microfilms, sans l'accord écrit de réditeur. in writing from the publisher
Bureau central de la Commission Electrotechnique Internationale 3, rue de Varembé Genève Suisse
Téléfax: +41 22 919 0300 e-mail: inmail(G71ec.ch IEC web site http://www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
E
International Electrotechnical Commission PRICE CODE
IEC
MemayHaponHaa 3neKrpoTexHHgecKan HOMHCCHH
Pour prix, voir catalogue en vigueur

For price, see current catalogue

---------------------- Page: 7 ----------------------

SIST EN 60382:1998
382©IEC – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
ANALOGUE PNEUMATIC SIGNAL
FOR PROCESS CONTROL SYSTEMS
FOREWORD
1)
The formal decisions or agreements of the IEC on technical matters, prepared by Technical Committees on
which all the National Committees having a special interest therein are represented, express, as nearly as
possible, an international consensus of opinion on the subjects dealt with.
2)
They have the form of recommendations for international use and they are accepted by the National
Committees in that sense.
3)
In order to promote international unification, the IEC expresses the wish that all National Committees
should adopt the text of the IEC recommendation for their national rules in so far as national conditions will
permit. Any divergence between the IEC recommendation and the corresponding national rules should, as
far as possible, be clearly indicated in the latter.
This International Standard has been prepared by Sub-Committee 65A: System aspects,
of IEC Technical Committee No. 65: Industrial-process measurement and control.
This second edition of IEC 382 replaces the first edition published in 1971.
The text of this standard is based on the following documents:
DIS Report on Voting
65A(CO)25 65A(CO)28
Full information on the voting for the approval of this standard can be found in the Voting
Report
indicated in the above table.

---------------------- Page: 8 ----------------------

SIST EN 60382:1998
3820OIEC - 5 -
ANALOGUE PNEUMATIC SIGNAL
FOR PROCESS CONTROL SYSTEMS
1 General
1.1
Scope and object
This International Standard specifies the analogue pneumatic signal used in industrial-
process measurement and control systems to transmit information between the elements
of such systems.
It is applicable to:
a) pneumatic controllers;
b) pneumatic transmitters and information transmission systems.
This standard does not apply to analogue pneumatic signals used entirely within an
element.
The object of this standard is to establish:
a) a
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.