iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 50064:1998

(Main)

Wrought aluminium and aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear

Wrought aluminium and aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear

This standard applies to fusion welded wrought aluminium and aluminium alloy enclosures pressurized with dry air, inert gases, for example sulphur hexafluoride or nitrogen or a mixture of such gases, used in indoor or outdoor installations of high-voltage switchgear and controlgear with rated voltages of 72,5 kV and above, where the gas is used principally for its dielectric and/or arc-quenching properties. The enclosures comprise parts of electrical equipment not necessarily limited to the following examples: circuit-breakers, switch-disconnectors, disconnectors, earthing switches, current transformers, voltage transformers, surge arrestors, busbars and connections. The scope covers also pressurized components such as the centre-chamber of live tank switchgear and controlgear, gas-insulated current transformers, etc.

Kapselungen aus Aluminium und Aluminium-Knetlegierungen für gasgefüllte Hochspannungs-Schaltgeräte und -Schaltanlagen

Enveloppes en aluminium et alliage d'aluminium corroyé pour l'appareillage à haute tension sous pression de gaz

Wrought aluminium and aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear

General Information

Status
Withdrawn
Publication Date
31-Jan-1998
Withdrawal Date
19-Sep-2021
ICS
29.130.10 - High voltage switchgear and controlgear
77.150.10 - Aluminium products
Technical Committee
SKA - Switchgear and control gear
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
17-Sep-2021
Due Date
10-Oct-2021
Completion Date
20-Sep-2021
Ref Project
EN 50064:1989 - Wrought aluminium and aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear

Relations

Amended By
SIST EN 50064:1998/A1:1998 - Wrought aluminium and aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear
Effective Date
21-Sep-2010
Replaced By
SIST EN 50064:2019 - High-voltage switchgear and controlgear - Gas-filled wrought aluminium and aluminium alloy enclosures
Effective Date
13-Nov-2018
Amended By
SIST EN 50064:1998/A1:1998 - Wrought aluminium and aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear
Effective Date
29-Jan-2023
Replaced By
SIST EN 50064:2019 - High-voltage switchgear and controlgear - Gas-filled wrought aluminium and aluminium alloy enclosures
Effective Date
07-Jun-2022
Amended By
SIST EN 50064:1998/A1:1998 - Wrought aluminium and aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear
Effective Date
07-Jun-2022
Revised
SIST EN 50064:2019 - High-voltage switchgear and controlgear - Gas-filled wrought aluminium and aluminium alloy enclosures
Effective Date
18-Oct-2016

Buy Standard

EN 50064:1998EN 50064:1998
PreviousNext
Standard
EN 50064:1998
English language
80 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50064:1998
01-februar-1998
Wrought aluminium and aluminium alloy enclosures for gas-filled high-voltage
switchgear and controlgear
Wrought aluminium and aluminium alloy enclosures for gas-filled high-voltage switchgear
and controlgear
Kapselungen aus Aluminium und Aluminium-Knetlegierungen für gasgefüllte
Hochspannungs-Schaltgeräte und -Schaltanlagen
Enveloppes en aluminium et alliage d'aluminium corroyé pour l'appareillage à haute
tension sous pression de gaz
Ta slovenski standard je istoveten z: EN 50064:1989
ICS:
29.130.10 Visokonapetostne stikalne in High voltage switchgear and
krmilne naprave controlgear
77.150.10 Aluminijski izdelki Aluminium products
SIST EN 50064:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50064:1998

---------------------- Page: 2 ----------------------

SIST EN 50064:1998

---------------------- Page: 3 ----------------------

SIST EN 50064:1998

---------------------- Page: 4 ----------------------

SIST EN 50064:1998

---------------------- Page: 5 ----------------------

SIST EN 50064:1998

---------------------- Page: 6 ----------------------

SIST EN 50064:1998

---------------------- Page: 7 ----------------------

SIST EN 50064:1998

---------------------- Page: 8 ----------------------

SIST EN 50064:1998

---------------------- Page: 9 ----------------------

SIST EN 50064:1998

---------------------- Page: 10 ----------------------

SIST EN 50064:1998

---------------------- Page: 11 ----------------------

SIST EN 50064:1998

---------------------- Page: 12 ----------------------

SIST EN 50064:1998

---------------------- Page: 13 ----------------------

SIST EN 50064:1998

---------------------- Page: 14 ----------------------

SIST EN 50064:1998

---------------------- Page: 15 ----------------------

SIST EN 50064:1998

---------------------- Page: 16 ----------------------

SIST EN 50064:1998

---------------------- Page: 17 ----------------------

SIST EN 50064:1998

---------------------- Page: 18 ----------------------

SIST EN 50064:1998

---------------------- Page: 19 ----------------------

SIST EN 50064:1998

---------------------- Page: 20 ----------------------

SIST EN 50064:1998

---------------------- Page: 21 ----------------------

SIST EN 50064:1998

---------------------- Page: 22 ----------------------

SIST EN 50064:1998

---------------------- Page: 23 ----------------------

SIST EN 50064:1998

---------------------- Page: 24 ----------------------

SIST EN 50064:1998

---------------------- Page: 25 ----------------------

SIST EN 50064:1998

---------------------- Page: 26 ----------------------

SIST EN 50064:1998

---------------------- Page: 27 ----------------------

SIST EN 50064:1998

---------------------- Page: 28 ----------------------

SIST EN 50064:1998

---------------------- Page: 29 ----------------------

SIST EN 50064:1998

---------------------- Page: 30 ----------------------

SIST EN 50064:1998

---------------------- Page: 31 ----------------------

SIST EN 50064:1998

---------------------- Page: 32 ----------------------

SIST EN 50064:1998

---------------------- Page: 33 ----------------------

SIST EN 50064:1998

---------------------- Page: 34 ----------------------

SIST EN 50064:1998

---------------------- Page: 35 ----------------------

SIST EN 50064:1998

---------------------- Page: 36 ----------------------

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 50064:2019(Main)
High-voltage switchgear and controlgear - Gas-filled wrought aluminium and aluminium alloy enclosures
EN 50064:2018

This European Standard applies to welded wrought aluminium and aluminium alloy enclosures pressurized with dry air, inert gases, for example sulphur hexafluoride or nitrogen or a mixture of such gases, used in indoor and outdoor installations of high-voltage switchgear and controlgear with rated voltages above 1kV, where the gas is used principally for its dielectric and/or arc-quenching properties with rated voltages.
-   above 1 kV and up to and including 52 kV and with gas-filled compartments with design pressure higher than 300 kPa relative pressure (gauge);
-   and with rated voltage above 52 kV.
The enclosures comprise parts of electrical equipment not necessarily limited to the following examples:   
-   circuit-breakers;
-   switch-disconnectors;
-   disconnectors;
-   earthing switches;
-   current transformers;
-   voltage transformers;
-   surge arrestors;
-   busbars and connections;
-   etc.
The scope also covers enclosures of pressurized components such as the centre chamber of live tank switchgear, gas-insulated current transformers, etc.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50069:2019(Main)
High-voltage switchgear and controlgear - Gas-filled welded composite enclosures of cast and wrought aluminium alloys
EN 50069:2018

This European Standard applies to welded composite enclosures of cast and wrought aluminium alloy pressurized with dry air, inert gases (e.g. sulphur hexafluoride or nitrogen or a mixture of such gases), used in indoor and outdoor installations of high-voltage switchgear and controlgear with rated voltages above 1kV, where the gas is used principally for its dielectric and/or arc-quenching properties with rated voltages
-   above 1 kV and up to and including 52 kV and with gas-filled compartments with design pressure higher than 300 kPa relative pressure (gauge);
-   and with rated voltage above 52 kV.
The enclosures comprise parts of electrical equipment not necessarily limited to the following examples:
-   circuit-breakers;
-   switch-disconnectors;
-   disconnectors;
-   earthing switches;
-   current transformers;
-   voltage transformers;
-   surge arrestors;
-   busbars and connections;
-   etc.
The scope also covers enclosures of pressurized components such as the centre chamber of live tank switchgear, gas-insulated current transformers, etc.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50052:2017(Main)
Cast aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear
EN 50052:2016

This standard applies to cast aluminium alloy enclosures pressurized with dry air, inert gases, for example sulphur hexafluoride or nitrogen or a mixture of such gases, used in indoor or outdoor installations of high-voltage switchgear and controlgear above 1 kV, where the gas is used principally for its dielectric and/or arc-quenching properties with rated voltages
-   above 1 kV and up to and including 52 kV and with gas-filled compartments with design pressure higher than 300 kPa relative pressure (gauge);
-   and with rated voltage above 52 kV.
The enclosures comprise parts of electrical equipment not necessarily limited to the following examples:
-   Circuit-breakers;
-   Switch-disconnectors;
-   Disconnectors;
-   Earthing switches;
-   Current transformers;
-   Voltage transformers;
-   Surge arrestors;
-   Busbars and connections;
-   etc.
The scope also covers enclosures of pressurized components such as the centre chamber of live tank switchgear, gas-insulated current transformers, etc.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50064:2019(Main)
High-voltage switchgear and controlgear - Gas-filled wrought aluminium and aluminium alloy enclosures
EN 50064:2018

This European Standard applies to welded wrought aluminium and aluminium alloy enclosures pressurized with dry air, inert gases, for example sulphur hexafluoride or nitrogen or a mixture of such gases, used in indoor and outdoor installations of high-voltage switchgear and controlgear with rated voltages above 1kV, where the gas is used principally for its dielectric and/or arc-quenching properties with rated voltages.
-   above 1 kV and up to and including 52 kV and with gas-filled compartments with design pressure higher than 300 kPa relative pressure (gauge);
-   and with rated voltage above 52 kV.
The enclosures comprise parts of electrical equipment not necessarily limited to the following examples:   
-   circuit-breakers;
-   switch-disconnectors;
-   disconnectors;
-   earthing switches;
-   current transformers;
-   voltage transformers;
-   surge arrestors;
-   busbars and connections;
-   etc.
The scope also covers enclosures of pressurized components such as the centre chamber of live tank switchgear, gas-insulated current transformers, etc.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50069:2019(Main)
High-voltage switchgear and controlgear - Gas-filled welded composite enclosures of cast and wrought aluminium alloys
EN 50069:2018

This European Standard applies to welded composite enclosures of cast and wrought aluminium alloy pressurized with dry air, inert gases (e.g. sulphur hexafluoride or nitrogen or a mixture of such gases), used in indoor and outdoor installations of high-voltage switchgear and controlgear with rated voltages above 1kV, where the gas is used principally for its dielectric and/or arc-quenching properties with rated voltages
-   above 1 kV and up to and including 52 kV and with gas-filled compartments with design pressure higher than 300 kPa relative pressure (gauge);
-   and with rated voltage above 52 kV.
The enclosures comprise parts of electrical equipment not necessarily limited to the following examples:
-   circuit-breakers;
-   switch-disconnectors;
-   disconnectors;
-   earthing switches;
-   current transformers;
-   voltage transformers;
-   surge arrestors;
-   busbars and connections;
-   etc.
The scope also covers enclosures of pressurized components such as the centre chamber of live tank switchgear, gas-insulated current transformers, etc.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50052:2017(Main)
Cast aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear
EN 50052:2016

This standard applies to cast aluminium alloy enclosures pressurized with dry air, inert gases, for example sulphur hexafluoride or nitrogen or a mixture of such gases, used in indoor or outdoor installations of high-voltage switchgear and controlgear above 1 kV, where the gas is used principally for its dielectric and/or arc-quenching properties with rated voltages
-   above 1 kV and up to and including 52 kV and with gas-filled compartments with design pressure higher than 300 kPa relative pressure (gauge);
-   and with rated voltage above 52 kV.
The enclosures comprise parts of electrical equipment not necessarily limited to the following examples:
-   Circuit-breakers;
-   Switch-disconnectors;
-   Disconnectors;
-   Earthing switches;
-   Current transformers;
-   Voltage transformers;
-   Surge arrestors;
-   Busbars and connections;
-   etc.
The scope also covers enclosures of pressurized components such as the centre chamber of live tank switchgear, gas-insulated current transformers, etc.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN ISO/TS 16486-7:2023(Main)
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 7: Assessment of conformity (ISO/TS 16486-7:2023)
CEN ISO/TS 16486-7:2023

This document gives guidance and requirements for the assessment of conformity of compounds, products, joints and assemblies in accordance with the applicable part(s) of the ISO 16486 series which are intended to be included in the manufacturer’s quality plan as part of the quality management system and for the establishment of certification procedures.
NOTE 1    A basic test matrix in Annex B provides an overview of the testing scheme.
It is recommended for the manufacturer to have a management system such as ISO 9001[4] or equivalent.
NOTE 2    If certification is involved, certification bodies and inspection bodies operating according to ISO/IEC 17065 and ISO/IEC 17020 are considered to be competent.
In conjunction with the other parts of the ISO 16486 series (see Clause 2), this document is applicable to unplasticized polyamide (PA-U) piping systems intended to be buried and used for the supply of gaseous fuels. It is applicable to PA-U pipes, fittings and valves, as well as to their joints and to joints with components of other materials intended to be used under the following conditions:
a)    a maximum operating pressure (MOP) up to and including 18 bar[1] (the MOP is limited to 16 bar for CEN member countries, where ISO 16486-6 is replaced by CEN/TS 12007-6[1]);
b)    an operating temperature of 20 °C as the reference temperature.
NOTE 3    For operating temperatures different to 20 °C, derating coefficients can be used (see ISO 16486-6). CEN member countries use CEN/TS 12007-6[1] and ISO/TS 16486-7 (this document) as a basis, but they can also request additional requirements. For non-CEN member countries, information for dealing with special cases for PA-U can be found in ISO/TS 16486-7 (this document) and PPI TR-3.[7]
For mechanical fittings conforming to ISO 17885, guidance for assessment of conformity is not given in this document. When requested, a quality plan based on the tests mentioned can be set up in agreement between user and manufacturer.
The ISO 16486 series covers a range of maximum operating pressures and gives requirements concerning colours.
NOTE 4    It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and any relevant national regulations and installation practices or codes.
[1] 1 bar = 0,1 MPa = 105 Pa; 1 MPa = 1 N/mm2.

  • Technical specification
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 301 406-2 V3.1.1:2023(Main)
Digital Enhanced Cordless Telecommunications (DECT) - Harmonised Standard for access to radio spectrum - Part 2: DECT-2020 NR
ETSI EN 301 406-2 V3.1.1 (2023-08)

DEN/DECT-00359-2

  • Standard
    76 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    76 pages
    English language
    sale 15% off
  • Standard
    76 pages
    English language
    sale 15% off
  • Draft
    76 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60061-3:2000/A59:2023(Main)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges (IEC 60061-3:1969/AMD59:2023)
EN 60061-3:1993/A59:2023
  • Amendment
    67 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16186-5:2021+A1:2023(Main + Amendment)
Railway applications - Driver's cabs - Part 5: External visibility for tram vehicles
EN 16186-5:2021+A1:2023

This document specifies the external front and rear visibility conditions from cabs of tram
vehicles and the associated assessment method.
This document applies to vehicles operating on tram networks.
This document does not apply to driver's auxiliary desks.
This standard is not intended to be applied for tram train.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day