SIST EN IEC 60691:2024
(Main)Thermal-links - Requirements and application guide (IEC 60691:2023)
Thermal-links - Requirements and application guide (IEC 60691:2023)
This International Standard is applicable to thermal-links intended for incorporation in electrical
appliances, electronic equipment and component parts thereof, normally intended for use
indoors, in order to protect them against excessive temperatures under abnormal conditions.
NOTE 1 The equipment is not designed to generate heat.
NOTE 2 The effectiveness of the protection against excessive temperatures logically depends upon the position
and method of mounting of the thermal-link, as well as upon the current which it is carrying.
This document may be applicable to thermal-links for use under conditions other than indoors,
provided that the climatic and other circumstances in the immediate surroundings of such
thermal-links are comparable with those in this standard.
This document may be applicable to thermal-links in their simplest forms (e.g. melting strips or
wires), provided that molten materials expelled during function cannot adversely interfere with
the safe use of the equipment, especially in the case of hand-held or portable equipment,
irrespective of its position.
Annex H of this document is applicable to thermal-link packaged assemblies where the thermallink(
s) has already been approved to this standard but packaged in a metallic or non-metallic
housing and provided with terminals/wiring leads.
This document is applicable to thermal-links with a rated voltage not exceeding 690 V AC or
DC and a rated current not exceeding 63 A.
The objectives of this document are:
a) to establish uniform requirements for thermal-links,
b) to define methods of test, and
c) to provide useful information for the application of thermal-links in equipment.
This document is not applicable to thermal-links used under extreme conditions such as
corrosive or explosive atmospheres.
This document is not applicable to thermal-links to be used in circuits on AC with a frequency
lower than 45 Hz or higher than 62 Hz.
Temperatursicherungen - Anforderungen und Anwendungshinweise (IEC 60691:2023)
Protecteurs thermiques - Exigences et guide d'application (IEC 60691:2023)
IEC 60691:2023 est disponible sous forme de IEC 60691:2023 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.
L'IEC 60691:2023 s'applique aux protecteurs thermiques destinés à être incorporés dans les appareils électriques, le matériel électronique et ses composants, normalement utilisés en intérieur, afin de les protéger contre les températures excessives lors de conditions anormales.
NOTE 1 Le matériel n'est pas prévu pour produire de la chaleur.
NOTE 2 L'efficacité de la protection contre les températures excessives dépend logiquement de la position et du mode de montage du protecteur thermique ainsi que du courant qui le traverse.
Le présent document peut s'appliquer aux protecteurs thermiques utilisés dans d'autres conditions que celles qui sont réunies en intérieur, tant que les conditions climatiques ou autres de l'environnement immédiat de tels protecteurs thermiques sont comparables à celles de la présente norme.
Termični taljivi vložki - Zahteve in navodilo za uporabo (IEC 60691:2023)
Ta mednarodni standard se uporablja za termične taljive vložke, namenjene za vgradnjo v električne naprave in elektronsko opremo ter njihove sestavne dele, ki so običajno predvideni za notranjo uporabo, z namenom zagotavljanja zaščite pred prekomernimi temperaturami v izrednih razmerah.
OPOMBA 1: Oprema ni zasnovana za ustvarjanje toplote.
OPOMBA 2: Učinkovitost zaščite pred prekomernimi temperaturami je seveda odvisna od položaja in načina vgradnje termičnega taljivega vložka ter toka, ki ga prevaja.
Ta dokument se lahko uporablja za termične taljive vložke, namenjene za uporabo pri pogojih, ki ne vključujejo notranje uporabe, pod pogojem, da so podnebne in druge razmere v neposredni okolici takih termičnih taljivih vložkov primerljive z razmerami, opisanimi v tem standardu.
Ta dokument se lahko uporablja za termične taljive vložke v najosnovnejši obliki (npr. taljivi trakovi ali žice) pod pogojem, da staljeni materiali, ki se izločijo v primeru uporabe vložkov, ne vplivajo škodljivo na varno uporabo opreme, zlasti pri ročni ali prenosni opremi, ne glede na svoj položaj.
Priloga H tega dokumenta se uporablja za sklope termičnih taljivih vložkov, predhodno odobrenih za uporabo v skladu s tem standardom, ki so vstavljeni v kovinsko ali nekovinsko ohišje in vključujejo priključke/žične vodnike.
Ta dokument se uporablja za termične taljive vložke z naznačeno izmenično ali enosmerno napetostjo, ki ne presega 690 V, in nazivnim tokom, ki ne presega 63 A.
Namen tega dokumenta je:
a) vzpostaviti enotne zahteve za termične taljive vložke,
b) določiti preskusne metode, in
c) podati uporabne informacije za uporabo termičnih taljivih vložkov v opremi.
Ta dokument se ne uporablja za termične taljive vložke, ki se uporabljajo v ekstremnih pogojih, kot so korozivne ali eksplozivne atmosfere.
Ta dokument se ne uporablja za termične taljive vložke, predvidene za uporabo v vezjih izmenične napetosti s frekvenco manj kot 45 Hz ali več kot 62 Hz.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 60691:2024
01-april-2024
Termični taljivi vložki - Zahteve in navodilo za uporabo (IEC 60691:2023)
Thermal-links - Requirements and application guide (IEC 60691:2023)
Temperatursicherungen - Anforderungen und Anwendungshinweise (IEC 60691:2023)
Protecteurs thermiques - Exigences et guide d'application (IEC 60691:2023)
Ta slovenski standard je istoveten z: EN IEC 60691:2023
ICS:
29.120.50 Varovalke in druga Fuses and other overcurrent
nadtokovna zaščita protection devices
SIST EN IEC 60691:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 60691:2024
---------------------- Page: 2 ----------------------
SIST EN IEC 60691:2024
EUROPEAN STANDARD EN IEC 60691
NORME EUROPÉENNE
EUROPÄISCHE NORM November 2023
ICS 29.120.50 Supersedes EN 60691:2016; EN 60691:2016/A1:2019
English Version
Thermal-links - Requirements and application guide
(IEC 60691:2023)
Protecteurs thermiques - Exigences et guide d'application Temperatursicherungen - Anforderungen und
(IEC 60691:2023) Anwendungshinweise
(IEC 60691:2023)
This European Standard was approved by CENELEC on 2023-10-04. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60691:2023 E
---------------------- Page: 3 ----------------------
SIST EN IEC 60691:2024
EN IEC 60691:2023 (E)
European foreword
The text of document 32C/604/FDIS, future edition 5 of IEC 60691, prepared by SC 32C "Miniature
fuses" of IEC/TC 32 "Fuses" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 60691:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-07-04
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-10-04
document have to be withdrawn
This document supersedes EN 60691:2016 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60691:2023 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
IEC 60085:2007 NOTE Approved as EN 60085:2008 (not modified)
IEC 60695-10-3:2016 NOTE Approved as EN 60695-10-3:2016 (not modified)
IEC 60695-11-20:2015 NOTE Approved as EN 60695-11-20:2015 (not modified)
IEC 60127-1:2006 NOTE Approved as EN 60127-1:2006 (not modified)
IEC 60127-1:2006/A1:2011 NOTE Approved as EN 60127-1:2006/A1:2011 (not modified)
IEC 60127-1:2006/A2:2015 NOTE Approved as EN 60127-1:2006/A2:2015 (not modified)
IEC 60216-1:2013 NOTE Approved as EN 60216-1:2013 (not modified)
IEC 60695-2-11:2021 NOTE Approved as EN IEC 60695-2-11:2021 (not modified)
2
---------------------- Page: 4 ----------------------
SIST EN IEC 60691:2024
EN IEC 60691:2023 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.