SIST EN 61753-031-3:2009

Fibre optic interconnecting devices and passive components performance standard - Part 031-3: Non-connectorised single-mode 1xN and 2xN non-wavelength-selective branching devices for Category U - Uncontrolled environment (IEC 61753-031-3:2009)

This part of IEC 61753 contains the minimum initial tests and measurement requirements and severities which a non-wavelength selective branching device (NWBD) should satisfy in order to be categorized as meeting the requirements of Category U (uncontrolled environment) as defined in Annex A of IEC 61753-1. This standard takes into account two technologies present on the market: the Fused Biconical Taper (FBT) and the Planar Lightwave Circuit (PLC). Requirements cover balanced, bidirectional, non-connectorized, single-mode 1 - N and 2 - N non-wavelength-selective branching devices for use in an IEC Category U environment (N is the number of output ports), especially for Passive Optical Network (PON) application. The specifications of unbalanced branching devices are limited to 1 - 2 and 2 - 2 devices because they are the
most commonly used.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 031-3: Nicht mit Steckverbindern versehene wellenlängenunabhängige Einmoden-1xN- und 2xN-Verzweiger für die Kategorie U - Unkontrollierte Umgebung (IEC 61753-031-3:2009)

Norme de qualité de fonctionnement des dispositifs d'interconnexion et composants passifs à fibres optiques - Partie 031-3: Dispositifs de couplage non-connectorisés monomodes 1xN et 2xN ne dépendant pas de la longueur d'onde pour catégorie U - Environnement non contrôlé (CEI 61753-031-3:2009)

L'IEC 61753-031-3:2009 contient les exigences de mesure et d'essai initiales minimales et les sévérités auxquelles il convient qu'un dispositif de couplage indépendant de la longueur d'onde (NWBD) satisfasse afin d'être classé dans la catégorie U (environnement non contrôlé), selon la définition de l'Annexe A de la CEI 61753-1.
Mots clés: couplage indépendant de la longueur d'onde (NWBD), catégorie U (environnement non contrôlé)

Izvedbeni standard za povezovalne naprave in pasivne komponente optičnih vlaken - 031-3. del: Enorodni 1xN in 2xN nevalovnodolžinski selektivni optični sklopniki brez konektorjev za kategorijo U - Nenadzorovano okolje (IEC 61753-031-3:2009)

General Information

• Status: Withdrawn
• Publication Date: 21-May-2009
• Withdrawal Date: 22-Oct-2015
• ICS: 33.180.10 - Fibres and cables
• Technical Committee: iTEL - Communication cables
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 16-Oct-2015
• Due Date: 08-Nov-2015
• Completion Date: 23-Oct-2015
• Ref Project: EN 61753-031-3:2009 - Fibre optic interconnecting devices and passive components performance standard - Part 031-3: Non-connectorized single-mode 1xN and 2xN non-wavelength-selective branching devices (NWBD) for Category U - Uncontrolled environment

Relations

• Replaced By: SIST EN 61753-031-3:2015 - Fibre optic interconnecting devices and passive components - Performance standard - Part 031-3: Non-connectorised single-mode 1xN and 2xN non-wavelength-selective branching devices for Category U - Uncontrolled environment (IEC 61753-031-3:2014)
• Effective Date: 07-Jun-2022
• Replaces: SIST EN 61753-2-3:2002 - Fibre optic interconnecting devices and passive components performance standard -- Part 2-3: Non-connectorised single mode 1xN and 2xN non-wavelength-selective branching devices for Category U - Uncontrolled environment
• Effective Date: 29-Jan-2023
• Replaced By: SIST EN 61753-031-3:2015 - Fibre optic interconnecting devices and passive components - Performance standard - Part 031-3: Non-connectorised single-mode 1xN and 2xN non-wavelength-selective branching devices for Category U - Uncontrolled environment (IEC 61753-031-3:2014)
• Effective Date: 29-Jan-2023
• Replaces: SIST EN 61753-2-3:2002 - Fibre optic interconnecting devices and passive components performance standard -- Part 2-3: Non-connectorised single mode 1xN and 2xN non-wavelength-selective branching devices for Category U - Uncontrolled environment
• Effective Date: 13-May-2010

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61753-031-3:2009
01-julij-2009
,]YHGEHQLVWDQGDUG]DSRYH]RYDOQHQDSUDYHLQSDVLYQHNRPSRQHQWHRSWLþQLK
YODNHQGHO(QRURGQL[1LQ[1QHYDORYQRGROåLQVNLVHOHNWLYQLRSWLþQL
VNORSQLNLEUH]NRQHNWRUMHY]DNDWHJRULMR81HQDG]RURYDQRRNROMH,(&

Fibre optic interconnecting devices and passive components performance standard -
Part 031-3: Non-connectorised single-mode 1xN and 2xN non-wavelength-selective
branching devices for Category U - Uncontrolled environment (IEC 61753-031-3:2009)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil
031-3: Nicht mit Steckverbindern versehene wellenlängenunabhängige Einmoden-1xN-
und 2xN-Verzweiger für die Kategorie U - Unkontrollierte Umgebung (IEC 61753-031-
3:2009)
Norme de qualité de fonctionnement des dispositifs d'interconnexion et composants
passifs à fibres optiques - Partie 031-3: Dispositifs de couplage non-connectorisés
monomodes 1xN et 2xN ne dépendant pas de la longueur d'onde pour catégorie U -
Environnement non contrôlé (CEI 61753-031-3:2009)
Ta slovenski standard je istoveten z: EN 61753-031-3:2009
ICS:
33.180.10 2SWLþQDYODNQDLQNDEOL Fibres and cables
SIST EN 61753-031-3:2009 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61753-031-3:2009

---------------------- Page: 2 ----------------------

SIST EN 61753-031-3:2009

EUROPEAN STANDARD
EN 61753-031-3

NORME EUROPÉENNE
April 2009
EUROPÄISCHE NORM

ICS 33.180.10

English version


Fibre optic interconnecting devices
and passive components performance standard -
Part 031-3: Non-connectorized single-mode 1xN and 2xN
non-wavelength-selective branching devices (NWBD) for Category U -
Uncontrolled environment
(IEC 61753-031-3:2009)


Norme de qualité de fonctionnement  Lichtwellenleiter -
des dispositifs d'interconnexion Verbindungselemente
et composants passifs à fibres optiques - und passive Bauteile -
Partie 031-3: Dispositifs de couplage Betriebsverhalten -
non-connectorisés monomodes 1xN Teil 031-3: Nicht mit Steckverbindern
et 2xN ne dépendant pas de la longueur versehene wellenlängenunabhängige
d'onde pour catégorie U - Einmoden-1xN- und 2xN-Verzweiger
Environnement non contrôlé für die Kategorie U -
(CEI 61753-031-3:2009) Unkontrollierte Umgebung
(IEC 61753-031-3:2009)


This European Standard was approved by CENELEC on 2009-04-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: avenue Marnix 17, B - 1000 Brussels


© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61753-031-3:2009 E

---------------------- Page: 3 ----------------------

SIST EN 61753-031-3:2009
EN 61753-031-3:2009 - 2 -
Foreword
The text of document 86B/2789/FDIS, future edition 1 of IEC 61753-031-3, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61753-031-3 on 2009-04-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-01-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2012-04-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61753-031-3:2009 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60875-1 NOTE  Harmonized as EN 60875-1:2001 (not modified).
IEC 61753-1 NOTE  Harmonized as EN 61753-1:2007 (not modified).
__________

---------------------- Page: 4 ----------------------

SIST EN 61753-031-3:2009
- 3 - EN 61753-031-3:2009
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

1) 2)
IEC 60793-2-50 - Optical fibres - EN 60793-2-50 2008
Part 2-50: Product specifications - Sectional
specification for class B single-mode fibres


1) 2)
IEC 61300-2-1 - Fibre optic interconnecting devices and EN 61300-2-1 2003
passive components - Basic test and
measurement procedures -
Part 2-1: Tests - Vibration (sinusoidal)


1) 2)
IEC 61300-2-4 - Fibre optic interconnecting devices and EN 61300-2-4 1997
passive components - Basic test and
measurement procedures -
Part 2-4: Tests - Fibre/cable retention


1)
IEC 61300-2-5 - Fibre optic interconnecting devices and - -
passive components - Basic test and
measurement procedures -
Part 2-5: Tests - Torsion


1) 2)
IEC 61300-2-9 - Fibre optic interconnecting devices and EN 61300-2-9 1997
passive components - Basic test and
measurement procedures -
Part 2-9: Tests - Shock


1) 2)
IEC 61300-2-12 - Fibre optic interconnecting devices and EN 61300-2-12 2005
passive components - Basic test and
measurement procedures -
Part 2-12: Tests - Impact


1) 2)
IEC 61300-2-14 - Fibre optic interconnecting devices and EN 61300-2-14 2006
passive components - Basic test and + corr. November 2006
measurement procedures -
Part 2-14: Tests - Optical power handling and
damage threshold characterization


1) 2)
IEC 61300-2-17 - Fibre optic interconnecting devices and EN 61300-2-17 2003
passive components - Basic test and
measurement procedures -
Part 2-17: Tests - Cold


1) 2)
IEC 61300-2-18 - Fibre optic interconnecting devices and EN 61300-2-18 2005
passive components - Basic test and
measurement procedures -
Part 2-18: Tests - Dry heat - High temperature
endurance



1)
Undated reference.
2)
Valid edition at date of issue.

---------------------- Page: 5 ----------------------

SIST EN 61753-031-3:2009
EN 61753-031-3:2009 - 4 -
Publication Year Title EN/HD Year

1) 2)
IEC 61300-2-19 - Fibre optic interconnecting devices and EN 61300-2-19 2005
passive components - Basic test and
measurement procedures -
Part 2-19: Tests - Damp heat (steady state)


1) 2)
IEC 61300-2-22 - Fibre optic interconnecting devices and EN 61300-2-22 2007
passive components - Basic test and
measurement procedures -
Part 2-22: Tests - Change of temperature


1) 2)
IEC 61300-2-42 - Fibre optic interconnecting devices and EN 61300-2-42 2005
passive components - Basic test and
measurement procedures -
Part 2-42: Tests - Static side load for
connectors


1) 2)
IEC 61300-2-46 - Fibre optic interconnecting devices and EN 61300-2-46 2006
passive components - Basic test and
measurement procedures -
Part 2-46: Tests - Damp heat cyclic


1) 2)
IEC 61300-3-2 - Fibre optic interconnecting devices and EN 61300-3-2 2009
passive components - Basic test and
measurement procedures -
Part 3-2: Examinations and measurements -
Polarization dependent loss in a single-mode
fibre optic device


1) 2)
IEC 61300-3-3 - Fibre optic interconnecting devices and EN 61300-3-3 2003
passive components - Basic test and
measurement procedures -
Part 3-3: Examinations and measurements -
Active monitoring of changes in attenuation
and return loss


1) 2)
IEC 61300-3-6 - Fibre optic interconnecting devices and EN 61300-3-6 2009
passive components - Basic test and
measurement procedures -
Part 3-6: Examinations and measurements -
Return loss


1)
IEC 61300-3-7 - Fibre optic interconnecting devices and - -
passive components - Basic test and
measurement procedures -
Part 3-7: Examinations and measurements -
Wavelength dependence of attenuation and
return loss of single mode components


1) 2)
IEC 61300-3-20 - Fibre optic interconnecting devices and EN 61300-3-20 2001
passive components - Basic test and + corr. March 2002
measurement procedures -
Part 3-20: Examinations and measurements -
Directivity of fibre optic branching devices


1) 2)
IEC 61753-2-1 - Fibre optic interconnecting devices and EN 61753-2-1 2000
passive components performance standard -
Part 2-1: Fibre optic connectors terminated on
single-mode fibre for category U -
Uncontrolled environment

---------------------- Page: 6 ----------------------

SIST EN 61753-031-3:2009
IEC 61753-031-3
®
Edition 1.0 2009-02
INTERNATIONAL
STANDARD


Fibre optic interconnecting devices and passive components performance
standard –
Part 031-3: Non-connectorized single-mode 1×N and 2×N non-wavelength-
selective branching devices (NWBD) for Category U – Uncontrolled environment


INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
Q
ICS 33.180.10 ISBN 2-8318-1029-0
® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 7 ----------------------

SIST EN 61753-031-3:2009
– 2 – 61753-031-3 © IEC:2009(E)
CONTENTS
FOREWORD.3
1 Scope.5
2 Normative references .5
3 Test.6
4 Test report.7
5 Performance requirements .7
5.1 Dimensions .7
5.2 Sample size .7
5.3 Test details and requirements .7
Annex A (informative) Examples of attenuation requirements of 1 × N and 2 × N
branching devices.15
Annex B (normative) Sample size .16
Bibliography.17

Table 1 – Test details and requirements .8
Table A.1 – Attenuation and uniformity requirements of balanced bidirectional
branching devices having the most common port configurations for class FBT.15
Table A.2 – Attenuation and uniformity requirements of balanced bidirectional
branching devices having the most common port configurations for class PLC.15
Table A.3 – Attenuation requirements of 1 × 2 and 2 × 2 unbalanced branching devices
having the most common port configurations .15
Table B.1 – Sample size for each test.16

---------------------- Page: 8 ----------------------

SIST EN 61753-031-3:2009
61753-031-3 © IEC:2009(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE
COMPONENTS PERFORMANCE STANDARD –

Part 031-3: Non-connectorized single-mode 1×N and 2×N
non-wavelength-selective branching devices (NWBD) for Category U –
Uncontrolled environment


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61753-031-3 has been prepared by subcommittee 86B: Fibre optic
interconnecting devices and passive components, of IEC technical committee 86: Fibre optics.
The text of this standard is based on the following documents:
FDIS Report on voting
86B/2789/FDIS 86B/2821/RVD

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.

---------------------- Page: 9 ----------------------

SIST EN 61753-031-3:2009
– 4 – 61753-031-3 © IEC:2009(E)
A list of all the parts in the IEC 61753 series, under the general title Fibre optic
interconnecting devices and passive components performance standard, can be found on the
IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.

---------------------- Page: 10 ----------------------

SIST EN 61753-031-3:2009
61753-031-3 © IEC:2009(E) – 5 –
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE
COMPONENTS PERFORMANCE STANDARD –

Part 031-3: Non-connectorized single-mode 1×N and 2×N
non-wavelength-selective branching devices (NWBD) for Category U –
Uncontrolled environment



1 Scope
This part of IEC 61753 contains the minimum initial tests and measurement requirements and
severities which a non-wavelength selective branching device (NWBD) should satisfy in order
to be categorized as meeting the requirements of Category U (uncontrolled environment) as
defined in Annex A of IEC 61753-1.
This standard takes into account two technologies present on the market: the Fused Biconical
Taper (FBT) and the Planar Lightwave Circuit (PLC). Requirements cover balanced,
bidirectional, non-connectorized, single-mode 1 × N and 2 × N non-wavelength-selective
branching devices for use in an IEC Category U environment (N is the number of output
ports), especially for Passive Optical Network (PON) application. The specifications of
unbalanced branching devices are limited to 1 × 2 and 2 × 2 devices because they are the
most commonly used.
2 Normative references
The following normative documents are indispensable for the application of this document.
For dated references, only the edition cited applies. For undated references, the latest edition
of the referenced document (including any amendments) applies.
IEC 60793-2-50: Optical fibres – Part 2: Product specifications – Sectional specification for
class B single-mode fibres
IEC 61300-2-1, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-1: Tests – Vibration (sinusoidal)
IEC 61300-2-4, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-4: Tests – Fibre/cable retention
IEC 61300-2-5, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-5: Tests – Torsion/Twist
IEC 61300-2-9, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-9: Tests – Shock
IEC 61300-2-12, Fibre optic
...