SIST EN 480-6:2005

Admixtures for concrete, mortar and grout - Test methods - Part 6: Infrared analysis

This European Standard describes a method for identifying an admixture by infrared analysis (IR).

Zusatzmittel für Beton, Mörtel und Einpressmörtel -Prüfverfahren - Teil 6: Infrarot-Untersuchung

Dieses Dokument beschreibt ein Verfahren zur Erkennung und Bestimmung eines Zusatzmittels durch
Infrarot-Untersuchung.

Adjuvants pour béton, mortier et coulis - Méthodes d'essai - Partie 6: Analyse infrarouge

Le présent document décrit une méthode d'identification d'un adjuvant par analyse infrarouge (IR).

Kemijski dodatki za beton, malto in injekcijsko maso – Preskusne metode – 6. del: Infrardeča analiza

General Information

• Status: Withdrawn
• Publication Date: 30-Nov-2005
• Withdrawal Date: 22-Aug-2024
• ICS: 91.100.10 - Cement. Gypsum. Lime. Mortar
• ICS: 91.100.30 - Concrete and concrete products
• Technical Committee: BBB - Concrete, reinforced concrete and prestressed concrete
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 22-Aug-2024
• Due Date: 14-Sep-2024
• Completion Date: 23-Aug-2024
• Directive: 89/106/EEC - Construction products
• Mandate: M/128 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on products for concrete, mortar and grout
• Ref Project: EN 480-6:2005 - Admixtures for concrete, mortar and grout - Test methods - Part 6: Infrared analysis

Relations

• Replaces: SIST EN 480-6:1998 - Admixtures for concrete, mortar and grout - Test methods - Part 6: Infrared analysis
• Effective Date: 01-Dec-2005
• Replaced By: SIST EN 480-6:2024 - Admixtures for concrete, mortar and grout - Test methods - Part 6: Infrared analysis
• Effective Date: 01-Oct-2024

Standards Content (Sample)

SLOVENSKI STANDARD
01-december-2005
1DGRPHãþD
SIST EN 480-6:1998
.HPLMVNLGRGDWNL]DEHWRQPDOWRLQLQMHNFLMVNRPDVR±3UHVNXVQHPHWRGH±GHO
,QIUDUGHþDDQDOL]D
Admixtures for concrete, mortar and grout - Test methods - Part 6: Infrared analysis
Zusatzmittel für Beton, Mörtel und Einpressmörtel -Prüfverfahren - Teil 6: Infrarot-
Untersuchung
Adjuvants pour béton, mortier et coulis - Méthodes d'essai - Partie 6: Analyse infrarouge
Ta slovenski standard je istoveten z: EN 480-6:2005
ICS:
91.100.10 Cement. Mavec. Apno. Malta Cement. Gypsum. Lime.
Mortar
91.100.30 Beton in betonski izdelki Concrete and concrete
products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 480-6
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2005
ICS 91.100.10; 91.100.30 Supersedes EN 480-6:1996
English Version
Admixtures for concrete, mortar and grout - Test methods - Part
6: Infrared analysis
Adjuvants pour béton, mortier et coulis - Méthodes d'essai - Zusatzmittel für Beton, Mörtel und Einpressmörtel -
Partie 6: Analyse infrarouge Prüfverfahren - Teil 6: Infrarot-Untersuchung
This European Standard was approved by CEN on 28 July 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 480-6:2005: E
worldwide for CEN national Members.

Contents
Page
Foreword .3
1 Scope.4
2 Normative references.4
3 Principle.4
4 Apparatus.4
5 Procedure.4
5.1 Preparation of the dry material .4
5.2 Infrared spectrophotometry.4
6 Results.5
7 Test report.5

Foreword
This European Standard (EN 480-6:2005) has been prepared by Technical Committee CEN/TC 104
“Concrete and related products”, the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by March 2006, and conflicting national standards shall be withdrawn at
the latest by March 2006.
It has been drafted by Subcommittee 3 (SC 3) of TC 104 "Admixtures for concrete, mortar and grout".
This document is part of the series EN 480 "Admixtures for concrete, mortar and grout – Test methods" which
comprises the following
...