SIST EN 62868:2016
(Main)Organic light emitting diode (OLED) panels for general lighting - Safety requirements (IEC 62868:2014)
Organic light emitting diode (OLED) panels for general lighting - Safety requirements (IEC 62868:2014)
This International Standard specifies the safety requirements of OLED tiles and panels for use
on d.c. supplies up to 120 V or a.c. supplies up to 50 V at 50 Hz or 60 Hz for indoor and
similar general lighting purpose.
NOTE 1 At this moment only test methods for d.c. operated OLED panels are provided. Provisions for a.c.
operated OLED panels are under consideration.
NOTE 2 The construction of OLED tiles and panels is illustrated in Annex A.
NOTE 3 The OLED lighting system consisting of OLED panels or modules is illustrated in Annex D.
Organische Licht emittierende Dioden (OLED)-Panels für die Allgemeinbeleuchtung - Sicherheitsanforderungen
Panneaux à diodes électroluminescentes organiques (OLED) destinés à l’éclairage général - Exigences de sécurité
L'IEC 62868:2014 spécifie les exigences de sécurité de dalles et de panneaux OLED destinés à être utilisés avec des alimentations en tension continue jusqu'à 120 V ou avec des alimentations en tension alternative jusqu'à 50 V à 50 Hz ou 60 Hz, destinés à l'éclairage général intérieur ou similaire.
Plošče z organskimi svetlečimi diodami (OLED) za splošno razsvetljavo - Varnostne zahteve (IEC 62868:2014)
Ta mednarodni standard določa varnostne zahteve za ploščice in plošče OLED za uporabo z napajanjem z napetostmi do 120 V pri enosmernem ali do 50 V pri izmeničnem toku s frekvenco 50 ali 60 Hz za namene notranjega in podobnega splošnega osvetljevanja.
OPOMBA 1: V tem trenutku so na voljo le preskusne metode za plošče OLED za enosmerni tok. Ukrepi za plošče OLED za izmenični tok so v obravnavi.
OPOMBA 2: Sestava ploščic in plošč OLED je prikazana na sliki v Dodatku A.
OPOMBA 3: Svetlobni sistem OLED, sestavljen iz plošč ali modulov OLED, je prikazan na sliki v Dodatku D.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 62868:2016
01-april-2016
3ORãþH]RUJDQVNLPLVYHWOHþLPLGLRGDPL 2/(' ]DVSORãQRUD]VYHWOMDYR
9DUQRVWQH]DKWHYH ,(&
Organic light emitting diode (OLED) panels for general lighting - Safety requirements
(IEC 62868:2014)Ta slovenski standard je istoveten z: EN 62868:2015
ICS:
29.140.99 Drugi standardi v zvezi z Other standards related to
žarnicami lamps
SIST EN 62868:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------SIST EN 62868:2016
---------------------- Page: 2 ----------------------
SIST EN 62868:2016
EUROPEAN STANDARD EN 62868
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2015
ICS 29.140.99
English Version
Organic light emitting diode (OLED) panels for general lighting -
Safety requirements
(IEC 62868:2014)
Panneaux à diodes électroluminescentes organiques Organische Licht emittierende Dioden (OLED)-Panels für
(OLED) destinés à l'éclairage général - Exigences de die Allgemeinbeleuchtung - Sicherheitsanforderungen
sécurité (IEC 62868:2014)(IEC 62868:2014)
This European Standard was approved by CENELEC on 2014-10-30. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62868:2015 E---------------------- Page: 3 ----------------------
SIST EN 62868:2016
EN 62868:2015
European foreword
The text of document 34A/1786/FDIS, future edition 1 of IEC 62868, prepared by IEC/SC 34A
"Lamps" of IEC/TC 34 "Lamps and related equipment" was submitted to the IEC-CENELEC parallel
vote and approved by CENELEC as EN 62868:2015.The following dates are fixed:
(dop) 2016-05-06
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2017-10-30
• latest date by which the national
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.This document has been prepared under a mandate given to CENELEC by the European
Commission and the European Free Trade Association.
This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment
Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC).Endorsement notice
The text of the International Standard IEC 62868:2014 was approved by CENELEC as a European
Standard without any modification.---------------------- Page: 4 ----------------------
SIST EN 62868:2016
EN 62868:2015
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.Publication Year Title EN/HD Year
IEC 60050 series International electrotechnical vocabulary -- - -
Chapter 00: General index
IEC 60068-2-6 2007 Environmental testing -- Part 2-6: Tests - EN 60068-2-6 2008
Test Fc: Vibration (sinusoidal)
IEC 60598-1 - Luminaires -- Part 1: General requirements EN 60598-1 -
and tests
IEC/TR 62854 2014 Sharp edge testing apparatus and test
procedure for lighting equipment – Tests
for sharpness of edge
ISO 4046-4 2002 Paper, board, pulps and related terms - - -
Vocabulary -- Part 4: Paper and board
grades and converted products
---------------------- Page: 5 ----------------------
SIST EN 62868:2016
---------------------- Page: 6 ----------------------
SIST EN 62868:2016
IEC 62868
Edition 1.0 2014-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Organic light emitting diode (OLED) panels for general lighting – Safety
requirements
Panneaux à diodes électroluminescentes organiques (OLED) destinés à l’éclairage
général – Exigences de sécurité
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX Q
ICS 29.140.99 ISBN 978-2-8322-1871-6
Warning! Make sure that you obtained this publication from an authorized distributor.
Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.
® Registered trademark of the International Electrotechnical CommissionMarque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 7 ----------------------
SIST EN 62868:2016
– 2 – IEC 62868:2014 © IEC 2014
CONTENTS
FOREWORD ........................................................................................................................... 3
1 Scope .............................................................................................................................. 5
2 Normative references ...................................................................................................... 5
3 Terms and definitions ...................................................................................................... 5
4 General ........................................................................................................................... 6
4.1 General requirements ............................................................................................. 6
4.2 General test requirements ....................................................................................... 7
5 Marking ........................................................................................................................... 7
5.1 Contents and location ............................................................................................. 7
5.2 Durability and legibility of marking ........................................................................... 7
6 Construction .................................................................................................................... 8
6.1 General ................................................................................................................... 8
6.2 Mechanical strength ................................................................................................ 8
6.3 Internal short circuit ................................................................................................ 8
6.4 Wireways ................................................................................................................ 9
6.5 Resistance to dust, solid objects and moisture ........................................................ 9
7 Mechanical hazard .......................................................................................................... 9
8 Fault conditions ............................................................................................................... 9
9 Insulation resistance and electric strength ..................................................................... 10
9.1 Insulation resistance ............................................................................................. 10
9.2 Electric strength .................................................................................................... 10
10 Thermal stress ............................................................................................................... 10
11 Creepage distances and clearances .............................................................................. 10
12 Resistance to heat and fire ............................................................................................ 10
12.1 Resistance to heat ................................................................................................ 10
12.2 Resistance to fire .................................................................................................. 10
13 Photobiological safety .................................................................................................... 11
14 Terminals ...................................................................................................................... 11
15 Information for luminaire design ..................................................................................... 11
Annex A (informative) Construction of OLED panels ........................................................... 12
Annex B (informative) Information for luminaire design ....................................................... 14
Annex C (normative) Method of provoking internal short circuit ........................................... 15
C.1 Method for an OLED panel with glass substrates .................................................. 15
C.2 Method for an OLED panel with flexible plastic substrates .................................... 15
C.3 Other methods ...................................................................................................... 15
Annex D (informative) Overview of the OLED lighting system consisting of OLEDpanel or module .................................................................................................................... 16
Figure A.1 – Schematic diagram of OLED tile for lighting ...................................................... 12
Figure A.2 – Schematic diagram of OLED panel (Example 1) for lighting .............................. 12
Figure A.3 – Schematic diagram of OLED panel (Example 2) for lighting .............................. 13
Figure A.4 – Schematic diagram of OLED panel (Example 3) for lighting .............................. 13
Figure D.1 – Schematic diagram of OLED lighting system consisting of OLED panelor module ............................................................................................................................. 16
Table 1 – Contents and location of marking ............................................................................ 7
---------------------- Page: 8 ----------------------SIST EN 62868:2016
IEC 62868:2014 © IEC 2014 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ORGANIC LIGHT EMITTING DIODE (OLED) PANELS
FOR GENERAL LIGHTING – SAFETY REQUIREMENTS
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62868 has been prepared by subcommittee SC 34A: Lamps, of
IEC technical committee 34: Lamps and related equipment.The text of this standard is based on the following documents:
FDIS Report on voting
34A/1786FDIS 34A/1806/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
---------------------- Page: 9 ----------------------SIST EN 62868:2016
– 4 – IEC 62868:2014 © IEC 2014
In this standard, the following print types are used:
– requirements: roman type,
– test specifications: italic type,
– notes: smaller roman type.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correctunderstanding of its contents. Users should therefore print this document using a
colour printer.---------------------- Page: 10 ----------------------
SIST EN 62868:2016
IEC 62868:2014 © IEC 2014 – 5 –
ORGANIC LIGHT EMITTING DIODE (OLED) PANELS
FOR GENERAL LIGHTING – SAFETY REQUIREMENTS
1 Scope
This International Standard specifies the safety requirements of OLED tiles and panels for use
on d.c. supplies up to 120 V or a.c. supplies up to 50 V at 50 Hz or 60 Hz for indoor and
similar general lighting purpose.NOTE 1 At this moment only test methods for d.c. operated OLED panels are provided. Provisions for a.c.
operated OLED panels are under consideration.NOTE 2 The construction of OLED tiles and panels is illustrated in Annex A.
NOTE 3 The OLED lighting system consisting of OLED panels or modules is illustrated in Annex D.
2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and
are indispensable for its application. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including anyamendments) applies.
IEC 60598-1, Luminaires – Part 1: General requirements and tests
IEC 60050 (all parts): International electrotechnical vocabulary (available at
)
IEC 60068-2-6:2007, Environmental testing – Part 2-6: Tests – Test Fc: Vibration (sinusoidal)
IEC TR 62854:2014, Sharp edge testing apparatus and test procedure for lightingequipment – Tests for sharpness of edge
ISO 4046-4:2002, Paper, board, pulps and related terms – Vocabulary – Part 4: Paper and
board grades and converted products3 Terms and definitions
For the purpose of this document, the terms and definitions given in IEC 60050-845 and the
following apply.3.1
organic light emitting diode
OLED
light emitting semiconductor consisting of an electroluminescent zone made of organic
compounds, situated between two electrodesNote 1 to entry: This note applies to the French language only.
3.2
OLED tile
smallest functional OLED light source which cannot be separated into smaller OLED lighting
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.