iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

oSIST prEN 4709-007:2024

(Main)

Aerospace series - Unmanned Aircraft Systems - Part 007: General product requirements for UAS of classes C5 and C6

Aerospace series - Unmanned Aircraft Systems - Part 007: General product requirements for UAS of classes C5 and C6

Luft- und Raumfahrt - Unbemannte Luftfahrzeugsysteme - Teil 007: Allgemeine Produktanforderungen für UAS der Klassen C5 und C6

Série aérospatiale - Aéronefs télépilotés - Partie 007 : Exigences produit générales pour les classes d'UAS C5 et C6

Aeronavtika - Letalski sistemi brez posadke - 007. del: Splošne zahteve za proizvode za UAS razredov C5 in C6

General Information

Status
Not Published
Public Enquiry End Date
29-Jan-2024
ICS
49.020 - Aircraft and space vehicles in general
Technical Committee
I13 - Imaginarni 13
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
16-Nov-2023
Due Date
04-Apr-2024
Directive
2019/945 - Commission Delegated Regulation (EU) 2019/945 of 12 March 2019 on unmanned aircraft systems and on third-country operators of unmanned aircraft systems
Mandate
M/567 - Standardisation Request to the European Committee for Standardisation as regards unmanned aircraft systems intended to be operated in the ‘open’ category of operations in support of Commission Delegated Regulation (EU) 2019/945
Ref Project
prEN 4709-007 - Aerospace series - Unmanned Aircraft Systems - Part 007: General product requirements for UAS of classes C5 and C6

Buy Standard

prEN 4709-007:2024 - BARVEprEN 4709-007:2024 - BARVE
PreviousNext
Draft
prEN 4709-007:2024 - BARVE
English language
31 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 4709-007:2024
01-januar-2024
Aeronavtika - Letalski sistemi brez posadke - 007. del: Splošne zahteve za
proizvode za UAS razredov C5 in C6
Aerospace series - Unmanned Aircraft Systems - Part 007: General product
requirements for UAS of classes C5 and C6
Luft- und Raumfahrt - Unbemannte Luftfahrzeugsysteme - Teil 007: Allgemeine
Produktanforderungen für UAS der Klassen C5 und C6
Série aérospatiale - Aéronefs télépilotés - Partie 007 : Exigences produit générales pour
les classes d'UAS C5 et C6
Ta slovenski standard je istoveten z: prEN 4709-007
ICS:
49.020 Letala in vesoljska vozila na Aircraft and space vehicles in
splošno general
oSIST prEN 4709-007:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 4709-007:2024

---------------------- Page: 2 ----------------------
oSIST prEN 4709-007:2024


DRAFT
EUROPEAN STANDARD
prEN 4709-007
NORME EUROPÉENNE

EUROPÄISCHE NORM

November 2023
ICS
English Version

Aerospace series - Unmanned Aircraft Systems - Part 007:
General product requirements for UAS of classes C5 and
C6
 Luft- und Raumfahrt - Unbemannte
Luftfahrzeugsysteme - Teil 007: Allgemeine
Produktanforderungen für UAS der Klassen C5 und C6
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 471.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 4709-007:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 4709-007:2024
prEN 4709-007:2023 (E)
Contents Page

European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Product requirements and compliance for Class 5 UAS. 7
4.1 UA configuration . 7
4.1.1 Design requirements . 7
4.1.2 Design verification . 7
4.1.3 Pass criteria . 7
4.2 Information about height of the UA . 7
4.2.1 Performance requirements .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 9300-120:2024(Main)
Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D CAD and PDM data - Part 120: CAD 3D explicit geometry with graphic product and manufacturing information
EN 9300-120:2023

1.1 Introduction
This document defines the requirements for the long term digital preservation of the presentation of Product and Manufacturing Information (PMI) with their possible links to the 3D explicit shape and geometry of single CAD parts. The goal is to preserve this 3D information with respect to the geometry and related PMI produced by the original CAD system, following the principles laid down in EN 9300 003 “Fundamentals and Concepts”.
The requirements of EN 9300 110 “CAD mechanical 3D explicit geometry information” about the preservation of the 3D explicit shape shall apply within this document.
The meaning of terms "Presentation" and "Representation", defined in the EN 9300 100 “Common concepts for Long term archiving and retrieval of CAD 3D mechanical information” is required to understand this EN 9300 document.
1.2 In scope
The following outlines the total scope of this document:
- the Presentation of 3D geometrical dimension and tolerance, and 3D annotation attributes;
- their possible semantic links with 3D Geometric shape;
- User Defined Attributes: that are assigned to 3D geometric entities or at the part level.
For the purpose of this document, the semantic definition is at the level that supports associative “Cross-highlighting”, to illustrate the portion of the geometry to which a PMI element applies.
In this version, the technology used to preserve this 3D information is based on polyline and tessellated presentation. Polyline presentation is a conversion to lines and curves of all 3D annotations by the STEP interfaces of the CAD system, including validation properties.  Tessellated presentation is a conversion to tessellated curves and tessellated faces. The main use cases are the Certification and Product Liability of static information, however, re-use is also possible after the deletion of previous PMI and creation of new PMI (refer to clause 3 for definition).
1.3 Out of scope
The following is outside the scope:
- machine-interpretable PMI “Representation”;
- how to preserve additional information:
- - property rights;
- -form features;
- -machining features;
- CAD Assemblies.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 9300-121:2024(Main)
Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D CAD and PDM data - Part 121: Semantic representation of CAD 3D Explicit Geometry with Product and Manufacturing Information
EN 9300-121:2023

1.1 Introduction
This document defines the requirements for the long term digital preservation of the Semantic Representation of Product and Manufacturing Information (PMI) with their possible links to the 3D explicit shape and geometry of single CAD parts. The goal is to preserve this 3D information, without loss, with respect to the geometry produced by the original CAD system, following the principles laid down in EN 9300 003 “Fundamentals and Concepts”.
The requirements of EN 9300 110 concerning the preservation of the 3D explicit shape shall apply within this Part.
The term “semantic representation” is defined in Clause 3 “Terms, definitions and abbreviations”.
1.2 In scope
The following outlines the total scope of EN 9300 121:
- machine-interpretable PMI “Semantic Representation” (Refer to clause 3 for definition);
- the association of the above with 3D geometric shapes;
- the possible association of the above with Presentation of 3D Product and Manufacturing Information (PMI), and 3D annotations as defined in EN 9300 120.
In EN 9300 121, the technology used to preserve this 3D information is based on semantic representation. The main use cases are Certification, Product Liability and Design re-use.
For the purpose of this document, the semantic definition is at the level that supports associative “Cross-highlighting” for the purpose of human readability.
1.3 Out of scope
The following is outside the scope:
- PMI presentation (defined in EN 9300 120);
- User defined attributes that are assigned to 3D geometric entities or at the part level. The archiving of the UDA is defined in EN 9300 120.
- How to preserve additional information:
- - property rights;
- - form features;
- - CAD Assemblies.
- The semantics of special Notes outside the scope of PMI: ITAR/EAR, proprietary, and title block information, etc.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 9300-125:2024(Main)
Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 125: Explicit CAD assembly structure with Graphic Product and Manufacturing Information (PMI)
EN 9300-125:2023

1.1 Introduction
This document defines the requirements for the long-term digital preservation of the presentation of Product and Manufacturing Information (PMI) with their possible links to the 3D explicit shape and geometry of CAD assembly structure. The goal is to preserve this 3D information, without loss, with respect to the geometry produced by the original CAD system, following the principles laid down in EN 9300 003 “Fundamentals and Concepts”.
This will allow the retrieval of the assembly structure including the placement information.
This standard extends EN 9300-115 “Explicit CAD Assembly Structure” by including assembly level PMI.
PMI for the assembly structure can be recorded in the same file as the geometry, can be in a nested assembly structure or the PMI will be contained in its own separate file (Side-Car).
The PMI elements shall be presented on the graphic level only (i.e. polyline, tessellated).
1.2 Out of scope
The following is outside the scope:
- The archiving of assembly Form Features.
- Semantic PMI representation is out of scope for this document.
- The geometry defined at assembly level is out of scope for this document.
(This document covers PMI at the assembly level only.)

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 4709-002:2023(Main)
Aerospace series - Unmanned Aircraft Systems - Part 002: Direct Remote identification
EN 4709-002:2023
  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 9722:2023(Main)
Aerospace series - Architecture for integrated management of a system's health condition
EN 9722:2023

This recommendation is mainly aimed at all the trades which are actively involved in managing the health of a system.
Although it relies on examples of aeronautical systems, the expert group considers that these general recommendations are of interest for systems from other areas.

  • Standard
    67 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 9215:2023(Main)
Programme Management - Definition justification and qualification - A guide to drawing up the definition justification plan and of the definition justification dossier
EN 9215:2023

This document sets forth the general rules applying to the justification of the definition of a product (tangible or intangible) and specifies the content of the Definition Justification Plan (DJP) and the Definition Justification Dossier (DJD).
It is applicable to all products designed and developed to fulfil the requirements of a customer expressed in a (Need) Technical Specification. Industrials are advised to apply the following principles to their own needs for justification in their internal customer/supplier relations.
Clause 5 presents the concepts and the documents associated with the justification of the definition and qualification processes.
Clause 6 summarizes the role and the contractual nature of the qualification of the definition.
Clause 7 gives details of the qualification of the definition process, while Clause 8 positions this process in the programme development logic.
The document also describes the differences between the justification and the qualification of the definition and other notions, such as verification, validation or acceptance (Clause 9).
Clause 10 is a guide to the establishment and maintenance of the documents associated with the justification of the definition and qualification processes. Information related to the certification process, even if it is out of the scope of the present document, is also presented in Clause 10, because this process has certain similarities with the justification of the definition and qualification process.
This document belongs to the documents supporting the EN 9200 relating to Project Management Specification.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 20785-3:2023(Main)
Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 3: Measurements at aviation altitudes (ISO 20785-3:2023)
EN ISO 20785-3:2023

The following documents, in whole or in part, are normatively referenced in ISO 20785-3:2015 and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO/IEC Guide 98‑1, Uncertainty of measurement ? Part 1: Introduction to the expression of uncertainty in measurement
ISO/IEC Guide 98‑3, Uncertainty of measurement ? Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)
ISO 20785‑1, Dosimetry for exposures to cosmic radiation in civilian aircraft ? Part 1: Conceptual basis for measurements
ISO 20785‑2, Dosimetry for exposures to cosmic radiation in civilian aircraft ? Part 2: Characterization of instrument response

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 4863:2023(Main)
Aerospace series - Rotorcraft immersion suits - Requirements, testing and marking
EN 4863:2023

This technical document specifies requirements for immersion suits for use by helicopter crew members and passengers in the event of a ditching or water impact, to ensure minimum levels of performance. It applies to immersion suits for use by adults only.

  • Standard
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 4862:2023(Main)
Aerospace series - Rotorcraft constant wear lifejackets - Requirements, testing and marking
EN 4862:2023

This document specifies requirements for constant wear lifejackets for use by helicopter crew members and passengers in the event of a ditching or water impact, to ensure minimum levels of performance. It only applies to constant wear lifejackets for use by adults and that are intended to be manually inflated after leaving the helicopter.
Helicopter constant wear lifejackets are designed to be worn with or without a helicopter immersion suit and/or emergency breathing system.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 9114:2023(Main)
Aerospace series - Quality systems - Direct Ship - Guidance for Aerospace Companies
EN 9114:2022

1.1   General
This document is limited to the aerospace industry, where an approved manufacturer requests a supplier to ship an article against the approved manufacturer’s quality system directly to a customer. The direct ship process is not required or applicable to standard parts or military parts. In this process, the approved manufacturer is responsible for assurance that the article conforms to type design information.
1.2   Purpose
This document provides guidance to approved manufacturers, their suppliers, and customers when an approved manufacturer requests a supplier to ship an article against the approved manufacturer’s purchase document directly to a customer, commonly known as “Direct Ship”.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day