SIST EN 1254-1:1999

Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes

This European standard specifies materials, assembly dimensions and tolerances and test requirements for fittings of copper and copper alloys with or without plating. Maximum permissible temperatures and pressures are also established. This part of prEN 1254 specifies connection end dimensions of capillary soldering and brazing ends for the purposes of joining copper tubes specified in EN 1057. Fittings may comprise a combination of any of the end types specified in prEN 1254-1 to prEN 1254-5 or other standards. The standard establishes a designation system for the fittings.

Kupfer und Kupferlegierungen - Fittings - Teil 1: Kapillarlötfittings für Kupferrohre (Weich- und Hartlöten)

Diese europäische Norm legt Werkstoffe, Anschlußmaße, Toleranzen und Anforderungen an die Prüfung von Fittings aus Kupfer und Kupferlegierungen mit oder ohne galvanischen Überzug fest sowie die maximal zulässigen Drücke und Temperaturen. Dieser Teil der EN 1254 legt die Abmessungen fest, die für den Anschluß von kapillarlötfittings an Kupferrohre nach EN 1057 geeignet sind. Die Fittings können eine Kombination aller Anschlußarten umfassen, die in prEN 1254-1 bis prEN 1254-5 oder anderen Normen festgelegt sind. Die Norm legt ein Bezeichnungssystem für Fittings fest.

Cuivre et alliages de cuivre - Raccords - Partie 1: Raccords a braser par capillarité pour tubes en cuivre

La présente norme européenne spécifie les matériaux, les dimensions et les tolérances d'assemblage ainsi que les prescriptions d'essai concernant les raccords en cuivre et alliages de cuivre, avec ou sans revetement. Les températures et les pressions de service maximales acceptables sont aussi établies. Cette partie du prEN 1254 spécifie les dimensions des extrémités de raccords a braser par capillarité destinés a l'assemblage de tubes en cuivre spécifiés dans l'EN 1057. Les raccords peuvent comporter une combinaison de plusieurs types d'extrémités spécifiés dans prEN 1254-1 a -5.

Baker in bakrove zlitine - Fitingi - 1. del: Fitingi s konci za kapilarno mehko in trdo lotanje na bakrene cevi

General Information

• Status: Withdrawn
• Publication Date: 31-Oct-1999
• Withdrawal Date: 02-Jun-2021
• ICS: 23.040.40 - Metal fittings
• ICS: 77.150.30 - Copper products
• Technical Committee: INEK - Nonferrous metals
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 03-Jun-2021
• Due Date: 26-Jun-2021
• Completion Date: 03-Jun-2021
• Directive: 89/106/EEC - Construction products
• Directive: 93/38/EEC - Procurement procedures of entities operating in the water, energy, transport and telecommunications sectors
• Mandate: M/131 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on pipes, tanks and ancillaries, not in contact with water intended for human consumption
• Mandate: M/BC/CEN/88/15 - Standardization request to CEN/CENELEC in the field of Water supply, drainage and sewerage
• Ref Project: EN 1254-1:1998 - Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes

Relations

• Revises: oSIST prEN 1254-1:2007 - Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes
• Effective Date: 18-Jan-2023
• Child: SIST EN 1254-3:2000 - Copper and copper alloys - Plumbing fittings - Part 3: Fittings with compression ends for use with plastics pipes
• Effective Date: 22-Dec-2008
• Child: SIST EN 1254-4:2000 - Copper and copper alloys - Plumbing fittings - Part 4: Fittings combining other end connections with capillary or compression ends
• Effective Date: 22-Dec-2008
• Child: SIST EN 1254-2:1999 - Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes
• Effective Date: 22-Dec-2008
• Revises: oSIST prEN 1254-1:2007 - Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes
• Effective Date: 19-Jan-2023
• Replaced By: SIST EN 1254-1:2021 - Copper and copper alloys - Plumbing fittings - Part 1: Capillary fittings for soldering or brazing to copper tubes
• Effective Date: 02-Jun-2021
• Revises: oSIST prEN 1254-1:2007 - Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Baker in bakrove zlitine - Fitingi - 1. del: Fitingi s konci za kapilarno mehko in trdo lotanje na bakrene ceviKupfer und Kupferlegierungen - Fittings - Teil 1: Kapillarlötfittings für Kupferrohre (Weich- und Hartlöten)Cuivre et alliages de cuivre - Raccords - Partie 1: Raccords a braser par capillarité pour tubes en cuivreCopper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes77.150.30Bakreni izdelkiCopper products23.040.40Kovinski fitingiMetal fittingsICS:Ta slovenski standard je istoveten z:EN 1254-1:1998SIST EN 1254-1:1999en01-november-1999SIST E
...