SIST EN 485-2:2016/oprA1:2018

Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties

This European Standard specifies the mechanical properties of wrought aluminium and wrought aluminium alloy sheet, strip and plate for general engineering applications.
It does not apply to semi-finished rolled products in coiled form to be subjected to further rolling (reroll stock) or to special products such as corrugated, embossed, painted, sheets and strips or to special applications such as aerospace, can stock, finstock, for which mechanical properties are specified in separate European Standards.
The chemical composition limits of the alloys are specified in EN 573-3. Temper designations are defined in EN 515.

Aluminium und Aluminiumlegierungen - Bänder, Bleche und Platten - Teil 2: Mechanische Eigenschaften

Diese Europäische Norm legt die mechanischen Eigenschaften für Bleche, Bänder und Platten aus Aluminium und Aluminium-Knetlegierungen fest, die für die allgemeine Verwendung bestimmt sind.
Sie gilt nicht für gewalzte Halbzeuge in aufgerollter Form, die einem weiteren Walzvorgang unterzogen werden (Vorwalzbänder), oder für spezielle Erzeugnisse, wie z. B. profilierte, geprägte oder lackierte Bänder und Bleche oder für spezielle Anwendungen, wie z. B. Luft- und Raumfahrt, Getränkedosen und Wärmeaustauscher, für die die mechanischen Eigenschaften in gesonderten Europäischen Normen festgelegt sind.
Die Grenzwerte der chemischen Zusammensetzung der Legierungen sind in EN 573-3 festgelegt. Die Bezeichnungen der Werkstoffzustände sind in EN 515 definiert.

Aluminium et alliages d'aluminium - Tôles, bandes et tôles épaisses - Partie 2 : Partie 2 : Caractéristiques mécaniques

La présente Norme européenne spécifie les caractéristiques mécaniques des tôles, bandes et tôles épaisses en aluminium corroyé et alliages d’aluminium corroyés pour applications courantes.
Elle ne s’applique pas aux demi-produits laminés, livrés en bobines, destinés à être relaminés (ébauches de relaminage), ni aux produits spéciaux, tels que les tôles et bandes ondulées, gravées, laquées, etc., ni aux applications spéciales, telles que la construction aéronautique, le boîtage et les échangeurs thermiques, pour lesquels les caractéristiques mécaniques sont spécifiées dans des Normes européennes séparées.
Les limites de composition chimique des alliages sont spécifiées dans l’EN 573-3. Les désignations des états métallurgiques sont définies sont définies dans l'EN 515.

Aluminij in aluminijeve zlitine - Pločevine, trakovi in plošče - 2. del: Mehanske lastnosti

General Information

• Status: Not Published
• Public Enquiry End Date: 14-Feb-2018
• ICS: 77.150.10 - Aluminium products
• Technical Committee: INEK - Nonferrous metals
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 08-Nov-2018
• Due Date: 13-Nov-2018
• Completion Date: 08-Nov-2018
• Ref Project: EN 485-2:2016/prA1 - Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties

Relations

• Consolidated By: SIST EN 485-2:2016+A1:2018 - Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties
• Effective Date: 18-Jan-2023
• Amends: SIST EN 485-2:2016 - Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties
• Effective Date: 01-Feb-2018

Overview

SIST EN 485-2:2016/oprA1:2018 is a European Standard developed by CEN that specifies the mechanical properties for wrought aluminium and aluminium alloy sheet, strip, and plate intended for general engineering applications. As Part 2 in the EN 485 family of standards, it outlines the essential mechanical property requirements to ensure consistent material performance across industries in Europe. This standard is integral for manufacturers, engineers, and quality assurance professionals working with aluminium materials in non-specialized applications.

SIST EN 485-2:2016/oprA1:2018 does not cover:

• Semi-finished rolled products supplied in coiled form for further rolling (reroll stock)
• Special product types, such as corrugated, embossed, or painted sheets/strips
• Aerospace, can stock, finstock, and other specialized applications, as these have dedicated standards

Reference to chemical composition limits and temper designations can be found in EN 573-3 and EN 515, respectively.

Key Topics

The standard focuses on the following core areas:

• Mechanical Properties Specification: Lists mechanical property requirements (such as tensile strength, yield strength, elongation) for a wide range of wrought aluminium alloys.
• Alloy and Temper Ranges: Covers an extensive array of aluminium alloys and their designated tempers suitable for general engineering purposes.
• Product Forms: Details apply specifically to sheet, strip, and plate-not coiled products or specialized fabricated forms.
• Table Updates: The draft amendment prA1 introduces updates to alloy listings and corrects specific mechanical property entries, such as for EN AW-5657.
• Referential Structure: Draws upon related standards for complementary information-chemical composition (EN 573-3) and tempers (EN 515).

Applications

SIST EN 485-2:2016/oprA1:2018 has practical value across a spectrum of manufacturing and engineering settings, including:

• General Engineering: Ensuring reliable mechanical behavior of aluminium sheets, strips, and plates used in structural, automotive, electrical, and various industrial applications.
• Product Standardization: Facilitates consistent quality and interchangeability of aluminium products across suppliers and markets.
• Material Certification: Used by quality control departments to verify that received materials meet the requisite mechanical properties.
• Design and Procurement: Provides engineers and buyers with trustworthy reference data when specifying or sourcing aluminium products for projects.

By adhering to this standard, manufacturers improve product credibility, streamline compliance across the European market, and facilitate acceptance in international supply chains.

Related Standards

For comprehensive understanding and precise specification, SIST EN 485-2:2016/oprA1:2018 should be used alongside these related standards:

• EN 485-1: General requirements for aluminium and aluminium alloy sheets, strips, and plates.
• EN 485-3 & EN 485-4: Specify tolerances on dimensions, form, and technical conditions for inspection and delivery.
• EN 573-3: Defines the chemical composition limits for aluminium alloys, critical for alloy selection and verification.
• EN 515: Details temper designations, necessary for understanding mechanical property variations.
• Other Application-Specific Standards: For aerospace, can stock, or finstock aluminium products, refer to the appropriate dedicated European standards.

---

Keywords: SIST EN 485-2:2016/oprA1:2018, aluminium sheets, aluminium strip, aluminium plate, mechanical properties, aluminium alloys, CEN standard, general engineering, material specification, quality assurance, material certification, European standards, aluminium product standards.

Standards Content (Sample)

SLOVENSKI STANDARD
01-februar-2018
$OXPLQLMLQDOXPLQLMHYH]OLWLQH3ORþHYLQHWUDNRYLLQSORãþHGHO0HKDQVNH
ODVWQRVWL
Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties
Aluminium und Aluminiumlegierungen - Bänder, Bleche und Platten - Teil 2:
Mechanische Eigenschaften
Aluminium et alliages d'aluminium - Tôles, bandes et tôles épaisses - Partie 2 : Partie 2 :
Caractéristiques mécaniques
Ta slovenski standard je istoveten z: EN 485-2:2016/prA1
ICS:
77.150.10 Aluminijski izdelki Aluminium products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
EN 485-2:2016
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
December 2017
ICS 77.150.10
English Version
Aluminium and aluminium alloys - Sheet, strip and plate -
Part 2: Mechanical properties
Aluminium et alliages d'aluminium - Tôles, bandes et Aluminium und Aluminiumlegierungen - Bänder,
tôles épaisses - Partie 2 : Partie 2 : Caractéristiques Bleche und Platten - Teil 2: Mechanische Eigenschaften
mécaniques
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 132.

This draft amendment A1, if approved, will modify the European Standard EN 485-2:2016. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 485-2:2016/prA1:2017 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Introduction . 4
1 Modifications to 4.3, “List of alloys and their mechanical properties” . 5
2 Modifications to 4.3, Table 41, “Alloy EN AW-5657 [Al 99,85Mg 1]” . 7

European foreword
This document (EN 485-2:2016/prA1:2017) has been prepared by Technical Committee CEN/TC 132
“Aluminium and its
...