Plastics -- Determination of apparent density of material that can be poured from a specified funnel

Specifies a method for the determination of the apparent density of a moulding powder or a granular material. The sample is pured through a specified funnel into a measuring cylinder of 100 cubiccentimeter capacity, the excess is removed with a straightedge and the mass of the contents is determinded by weighing. Expression of the apparent density in grams per millilitre.

Plastiques -- Détermination de la masse volumique apparente des matières susceptibles de s'écouler à travers un entonnoir donné

La présente Norme internationale spécifie une méthode de détermination de la masse volumique apparente, c'est-à-dire la masse par unité de volume, des matières en poudre ou en granulés, susceptibles de s'écouler à travers un entonnoir d'un modèle déterminé.  NOTE - Pour une méthode de détermination de la masse volumIque apparente des matières à mouler non susceptibles de s'écouler à travers un entonnoir donné, voir ISO 61. Lorsque cette méthode est appliquée à des matières composées de grains relativement gros, des résultats variables peuvent être obtenus, dus à l'erreur introduite lorsque le sommet du cylindre est arasé avec une lame à bord rectiligne. La connaissance de la masse volumique apparente ne peut servir à comparer l'expansion ou le foisonnement de matières à mouler que si leur densité à l'état moulé est approximativement la même.

Polimerni materiali - Določanje nasipne mase materiala, ki se lahko nasipa skozi lij določenih mer

General Information

Status
Withdrawn
Publication Date
31-May-1996
Withdrawal Date
30-Apr-2000
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-May-2000
Due Date
01-May-2000
Completion Date
01-May-2000

Relations

Buy Standard

Standard
ISO 60:1977 - Plastics -- Determination of apparent density of material that can be poured from a specified funnel
English language
2 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 60:1996
English language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ISO 60:1977 - Plastiques -- Détermination de la masse volumique apparente des matieres susceptibles de s'écouler a travers un entonnoir donné
French language
2 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 60:1977 - Plastiques -- Détermination de la masse volumique apparente des matieres susceptibles de s'écouler a travers un entonnoir donné
French language
2 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ORGANIZATION FOR STANDARDIZATION l MEXflYHAPOAHAR OPl-AHM3AUMfl l-Io CTAHAAPTM3AUM~.ORGANISATION INTERNATIONALE DE NORMALISATION
Determination of apparent density of material that
Plastics -
tan be poured from a specified funnel
Plastiques - Determination de la masse volumique apparente des matEres susceptibles de s ’ecouler a travers un
en tonnoir donnk
Second edition - 1977-08-01
UDC 678.033 : 531.755 Ref. No. ISO 60-1977 (E)
c
Y
Descriptors : plastics, moulding materials, tests,s physical tests,, density measurement, bulk density .
0
s
Price based-on 2 pages

---------------------- Page: 1 ----------------------
ßOREWORD
ISO (the International Organization for Standardization) is a worldwide federation
of national Standards institutes (EO member bodies). The work of developing
International Standards is carried out through SS0 technical committees. Every
member body interested in a subject for which a technical committee has been set
up has the right to be represented on that committee. lnternational organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated
to the member bodies for approval before their acceptance as International
Standards by the ISO Council.
ISO 60 was developed by Technical Committee
International Standard
ISO/TC 6 1, Plastics.
This second edition was submitted directly to the ISO Council, in accordance
with clause 6.12.1 of the Directives for the technical work of ISO. lt cancels
and replaces the first edition (i.e. ISO 60- ‘l976), which had been approved by the
member bodies of the following countries :
Australia India Portugal
Austria I reland South Africa, Rep. of
Belgium Israel Spain
Chile I taly Sweden
Czechoslovakia Japan Turkey
Denmark Mexico United Kingdom
Finland Netherlands U.S.A.
France New Zealand U.S.S. R.
Germany Pakistan Yugoslavia
G reece
Poland
No member body had expressed disapproval of the document.
0 International Organkation for Standardkation, 1977 l
Printed in Switzerland

---------------------- Page: 2 ----------------------
ISO 60-1977 (E)
INTERNATIONAL STANDARD
Plastics - Determination of apparent density of material that
tan be poured from a specified funnel
1 SCOPE AND FIELD OF APPLICATION
$ int. 56
0
* Dimensions in miiiimetres
This International Standard specifies a method of deter-
mining the apparent density, i.e. the mass per unit of
volume, of loose material (powder or granular material)
that tan be poured from a funnel of specified design.
Metal with
NOTE - For a method of determining the apparent density of s
...

SLOVENSKI STANDARD
SIST ISO 60:1996
01-junij-1996
3ROLPHUQLPDWHULDOL'RORþDQMHQDVLSQHPDVHPDWHULDODNLVHODKNRQDVLSDVNR]LOLM
GRORþHQLKPHU
Plastics -- Determination of apparent density of material that can be poured from a
specified funnel
Plastiques -- Détermination de la masse volumique apparente des matières susceptibles
de s'écouler à travers un entonnoir donné
Ta slovenski standard je istoveten z: ISO 60:1977
ICS:
83.080.10 Duromeri Thermosetting materials
SIST ISO 60:1996 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 60:1996

---------------------- Page: 2 ----------------------

SIST ISO 60:1996
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION l MEXflYHAPOAHAR OPl-AHM3AUMfl l-Io CTAHAAPTM3AUM~.ORGANISATION INTERNATIONALE DE NORMALISATION
Determination of apparent density of material that
Plastics -
tan be poured from a specified funnel
Plastiques - Determination de la masse volumique apparente des matEres susceptibles de s ’ecouler a travers un
en tonnoir donnk
Second edition - 1977-08-01
UDC 678.033 : 531.755 Ref. No. ISO 60-1977 (E)
c
Y
Descriptors : plastics, moulding materials, tests,s physical tests,, density measurement, bulk density .
0
s
Price based-on 2 pages

---------------------- Page: 3 ----------------------

SIST ISO 60:1996
ßOREWORD
ISO (the International Organization for Standardization) is a worldwide federation
of national Standards institutes (EO member bodies). The work of developing
International Standards is carried out through SS0 technical committees. Every
member body interested in a subject for which a technical committee has been set
up has the right to be represented on that committee. lnternational organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated
to the member bodies for approval before their acceptance as International
Standards by the ISO Council.
ISO 60 was developed by Technical Committee
International Standard
ISO/TC 6 1, Plastics.
This second edition was submitted directly to the ISO Council, in accordance
with clause 6.12.1 of the Directives for the technical work of ISO. lt cancels
and replaces the first edition (i.e. ISO 60- ‘l976), which had been approved by the
member bodies of the following countries :
Australia India Portugal
Austria I reland South Africa, Rep. of
Belgium Israel Spain
Chile I taly Sweden
Czechoslovakia Japan Turkey
Denmark Mexico United Kingdom
Finland Netherlands U.S.A.
France New Zealand U.S.S. R.
Germany Pakistan Yugoslavia
G reece
Poland
No member body had expressed disapproval of the document.
0 International Organkation for Standardkation, 1977 l
Printed in Switzerland

---------------------- Page: 4 ----------------------

SIST ISO 60:1996
ISO 60-1977 (E)
INTERNATIONAL STANDARD
Plastics - Determination of apparent density of material that
tan be poured from a spec
...

60
NTERNATIONALE
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION l MEXJJYHAPQfiHAR BPI-AHM3ALUU l-l0 CTAH~APTI43A~WM .ORGANISATION INTERNATIONALE DE NORMALISATION
Plastiques - Détermination de la masse volumique apparente
des matières susceptibles de s’écouler à travers un entonnoir
donné
Plastics - Determination of apparent density of material that cari be poured from a specified funnel
Deuxième édition - 1977-08-01
Réf. no : ISO 60-1977 (F)
CDU 678.033 : 531.755
LL
Y
K
0, Descripteurs : plastique, matière à mouler, essai,,& essais physique, mesurage de densité, masse volumique apparente.
c
Prix basé sur 2 pages

---------------------- Page: 1 ----------------------
AVANT-PROPOS
L’ISO (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L’élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comité membre intéressé par une étude a le droit de faire partiedu comité technique
correspondant. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I’ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont
soumis aux comités membres pour approbation, avant leur acceptation comme
Normes internationales par le Conseil de I’ISO.
La Norme internationale ISO 60 a été élaborée par le comité technique
I SBITC 6 1, Matières plastiques.
Cette seconde édition fut soumise directement au Conseil de I’ISO, conformément
au paragraphe 6.12.1 des Directives pour les travaux techniques de I’ISO. Elle
annule et remplace la première édition (ISO 60-1976), qui avait été approuvée par
les comités membres des pays suivants :
Afrique du Sud, Rép. d’ Grèce Pologne
Allemagne Inde Portugal
Australie Irlande Royaume-Uni
Autriche l sraël Suède
Belgique
Italie Tchécoslovaquie
Chili Japon
Turquie
Danemark Mexique
U.R.S.S.
Espagne Nouvelle-Zélande
U.S.A.
Finlande Pakistan
Yougoslavie
France
Pays-Bas
Aucun comité membre n’avait désapprouvé le document.
@ Organisation internationale de normalisation, 1977 l
Imprimé en Suisse

---------------------- Page: 2 ----------------------
ISO 60-1977 (F)
NORME INTERNATIONALE
Plastiques - Détermination de la masse volumique apparente
des matières susceptibles de s’écouler à travers un ent
donné
Dimensions en millimètres
1 OBJET ET DOMAINE D’APPLICATION
La présente Norme internationale spécifie une méthode de
détermination de la masse volumique apparente, c’est-à-dire
la masse par unité de volume, des matières en poudre ou en
Entonnoir
granulés, susceptibles de s’écouler à travers un entonnoir
en métal
d’un modèle déterminé.
présentant une
- surface
NOTE - Pour une méthode de détermination de la masse volumique
. intérieur’e polie
apparente des matières à mouler non susceptibles de s’écouler à
travers
...

60
NTERNATIONALE
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION l MEXJJYHAPQfiHAR BPI-AHM3ALUU l-l0 CTAH~APTI43A~WM .ORGANISATION INTERNATIONALE DE NORMALISATION
Plastiques - Détermination de la masse volumique apparente
des matières susceptibles de s’écouler à travers un entonnoir
donné
Plastics - Determination of apparent density of material that cari be poured from a specified funnel
Deuxième édition - 1977-08-01
Réf. no : ISO 60-1977 (F)
CDU 678.033 : 531.755
LL
Y
K
0, Descripteurs : plastique, matière à mouler, essai,,& essais physique, mesurage de densité, masse volumique apparente.
c
Prix basé sur 2 pages

---------------------- Page: 1 ----------------------
AVANT-PROPOS
L’ISO (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L’élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comité membre intéressé par une étude a le droit de faire partiedu comité technique
correspondant. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I’ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont
soumis aux comités membres pour approbation, avant leur acceptation comme
Normes internationales par le Conseil de I’ISO.
La Norme internationale ISO 60 a été élaborée par le comité technique
I SBITC 6 1, Matières plastiques.
Cette seconde édition fut soumise directement au Conseil de I’ISO, conformément
au paragraphe 6.12.1 des Directives pour les travaux techniques de I’ISO. Elle
annule et remplace la première édition (ISO 60-1976), qui avait été approuvée par
les comités membres des pays suivants :
Afrique du Sud, Rép. d’ Grèce Pologne
Allemagne Inde Portugal
Australie Irlande Royaume-Uni
Autriche l sraël Suède
Belgique
Italie Tchécoslovaquie
Chili Japon
Turquie
Danemark Mexique
U.R.S.S.
Espagne Nouvelle-Zélande
U.S.A.
Finlande Pakistan
Yougoslavie
France
Pays-Bas
Aucun comité membre n’avait désapprouvé le document.
@ Organisation internationale de normalisation, 1977 l
Imprimé en Suisse

---------------------- Page: 2 ----------------------
ISO 60-1977 (F)
NORME INTERNATIONALE
Plastiques - Détermination de la masse volumique apparente
des matières susceptibles de s’écouler à travers un ent
donné
Dimensions en millimètres
1 OBJET ET DOMAINE D’APPLICATION
La présente Norme internationale spécifie une méthode de
détermination de la masse volumique apparente, c’est-à-dire
la masse par unité de volume, des matières en poudre ou en
Entonnoir
granulés, susceptibles de s’écouler à travers un entonnoir
en métal
d’un modèle déterminé.
présentant une
- surface
NOTE - Pour une méthode de détermination de la masse volumique
. intérieur’e polie
apparente des matières à mouler non susceptibles de s’écouler à
travers
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.