Aerospace series - Nipples, lubricating, axial type, in corrosion resisting steel, passivated

This European Standard specifies the required characteristics and the tests for lubricating nipples of the axial type, in corrosion resisting steel, passivated. Annex A (normative) states the clearance space requirements for the coupling and uncoupling of the lubricating gun and the maximum permissible diameter of the lubricating gun barrel, together with installation thread requirements.
Lubricating nipples according to this standard are intended for use in aerospace assemblies, where regular lubrication of moving parts is required.

Luft- und Raumfahrt - Kegel-Schmiernippel, aus korrosionsbeständigem Stahl, passiviert

Série aérospatiale - Graisseurs à accrochage axial, en acier résistant à la corrosion, passivés

La présente norme européenne spécifie les caractéristiques requises et les essais pour les graisseurs à accrochage axial, en acier résistant à la corrosion, passivés. L’Annexe A (normative) définit les besoins en espace de dégagement pour l’accouplement et le désaccouplement du pistolet de graissage, le diamètre maximal admissible du fût du pistolet de graissage, ainsi que les exigences relatives aux conditions d'installation du filetage.
Les graisseurs conformes à la présente norme sont destinés à être utilisés dans les assemblages aérospatiaux, où un graissage fréquent des parties mobiles est nécessaire.

Aeronavtika - Stožčaste mazalke, aksialne, iz korozijsko odpornega jekla, pasivirane

Ta evropski standard določa zahtevane lastnosti in preskuse za aksialne pasivirane mazalke iz korozijsko odpornega jekla. V dodatku A (normativni) so navedene zahteve za razpoložljivi prostor za priklapljanje in odklapljanje mazalne pištole in največji dovoljeni premer tulca mazalne pištole ter zahteve za namestitveni navoj.
Mazalke iz tega evropskega standarda so namenjene za uporabo v aeronavtičnih sestavih, kjer je potrebno redno mazanje gibljivih delov.

General Information

Status
Published
Public Enquiry End Date
09-Feb-2016
Publication Date
05-Feb-2017
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
03-Feb-2017
Due Date
10-Apr-2017
Completion Date
06-Feb-2017

Buy Standard

Standard
EN 3908:2017
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.SDVLYLUDQHLuft- und Raumfahrt - Kegel-Schmiernippel, aus korrosionsbeständigem Stahl, passiviertSérie aérospatiale - Graisseurs à accrochage axial, en acier résistant à la corrosion, passivésAerospace series - Nipples, lubricating, axial type, in corrosion resisting steel, passivated49.035Sestavni deli za letalsko in vesoljsko gradnjoComponents for aerospace constructionICS:Ta slovenski standard je istoveten z:EN 3908:2017SIST EN 3908:2017en,fr,de01-april-2017SIST EN 3908:2017SLOVENSKI
STANDARD



SIST EN 3908:2017



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3908
January
t r s y ICS
v {ä r u w English Version
Aerospace series æ Nipplesá lubricatingá axial typeá in corrosion resisting steelá passivated Série aérospatiale æ Graisseurs à accrochage axialá en acier résistant à la corrosioná passivés
Luftæ und Raumfahrt æ KegelæSchmiernippelá aus korrosionsbeständigem Stahlá passiviert This European Standard was approved by CEN on
s s March
t r s xä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
9
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
u { r zã t r s y ESIST EN 3908:2017



EN 3908:2017 (E) 2 Contents
Page European foreword . 3 1 Scope . 4 2 Normative references . 4 3 Required characteristics . 5 4 Designation. 7 5 Marking . 8 6 Technical specification . 8 7 Requirements and test methods . 8 Annex A (normative)
Installation requirements . 12 A.1 Space requirements . 12 A.2 Installation thread requirement . 12
SIST EN 3908:2017



EN 3908:2017 (E) 3 European foreword This document (EN 3908:2017) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this European Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2017, and conflicting national standards shall be withdrawn at the latest by July 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 3908:2017



EN 3908:2017 (E) 4 1 Scope This European Standard specifies the required characteristics and the tests for lubricating nipples of the axial type, in corrosion resisting steel, passivated. Annex A (normative) states the clearance space requirements for the coupling and uncoupling of the lubricating gun and the maximum permissible diameter of the lubricating gun barrel, together with installation thread requirements. Lubricating nipples according to this European Standard are intended for use in aerospace assemblies, where regular lubrication of moving parts is required. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
EN 2424, Aerospace series — Marking of aerospace products EN 2516, Aerospace series — Passivation of corrosion resisting steels and decontamination of nickel base alloys EN 9100,
Quality Management Systems — Requirements for Aviation, Space and Defense Organizations ISO 68 (all parts), ISO general purpose screw threads — Basic profile IS0 413, Aircraft — Heads of lubricating nipples ISO 965-2, ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for general purpose external and internal screw threads — Medium quality ISO 2859-1, Sampling procedures for inspection by attributes — Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection ISO 6507-1,
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.