iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 12312-10:2005/kprA1:2008

(Amendment)

Aircraft ground support equipment - Specific requirements - Part 10: Container/Pallet transfer transporters

Aircraft ground support equipment - Specific requirements - Part 10: Container/Pallet transfer transporters

Luftfahrt-Bodengeräte - Besondere Anforderungen - Teil 10: Container/Paletten-Transfer-Transporter

Matériels au sol pour aéronefs - Exigences particulières - Partie 10: Transporteurs de conteneurs et de palettes

Podporna oprema na tleh za letalski promet - Posebne zahteve - 10. del: Naprave za pretovarjanje zabojnikov/palet

General Information

Status
Not Published
Public Enquiry End Date
30-Nov-2008
ICS
49.120 - Cargo equipment
55.180.01 - Freight distribution of goods in general
Technical Committee
I13 - Imaginarni 13
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
14-Oct-2019
Due Date
19-Oct-2019
Completion Date
14-Oct-2019
Directive
2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
98/37/EC - Machinery
Mandate
M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
Ref Project
EN 12312-10:2005/prA1 - Aircraft ground support equipment - Specific requirements - Part 10: Container/Pallet transfer transporters

Relations

Consolidated By
SIST EN 12312-10:2005+A1:2009 - Aircraft ground support equipment - Specific requirements - Part 10: Container/Pallet transfer transporters
Effective Date
18-Jan-2023
Revised
SIST EN 12312-10:2005 - Aircraft ground support equipment - Specific requirements - Part 10: Container/Pallet transfer transporters
Effective Date
01-Nov-2008
Consolidated By
SIST EN 12312-10:2005+A1:2009 - Aircraft ground support equipment - Specific requirements - Part 10: Container/Pallet transfer transporters
Effective Date
19-Jan-2023
Consolidated By
SIST EN 12312-10:2005+A1:2009 - Aircraft ground support equipment - Specific requirements - Part 10: Container/Pallet transfer transporters
Effective Date
01-Jul-2009

Buy Standard

EN 12312-10:2005/kprA1:2008EN 12312-10:2005/kprA1:2008
PreviousNext
Draft
EN 12312-10:2005/kprA1:2008
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 12312-10:2005/kprA1:2008
01-november-2008
Podporna oprema na tleh za letalski promet - Posebne zahteve - 10. del: Naprave
za pretovarjanje zabojnikov/palet
Aircraft ground support equipment - Specific requirements - Part 10: Container/Pallet
transfer transporters
Luftfahrt-Bodengeräte - Besondere Anforderungen - Teil 10: Container/Paletten-Transfer
-Transporter
Matériels au sol pour aéronefs - Exigences particulières - Partie 10: Transporteurs de
conteneurs et de palettes
Ta slovenski standard je istoveten z: EN 12312-10:2005/prA1
ICS:
49.120 Oprema za tovor Cargo equipment
55.180.01 Distribucija blaga s prevozom Freight distribution of goods
na splošno in general
SIST EN 12312-10:2005/kprA1:2008 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 12312-10:2005/kprA1:2008

---------------------- Page: 2 ----------------------

SIST EN 12312-10:2005/kprA1:2008
EUROPEAN STANDARD
FINAL DRAFT
EN 12312-10:2005
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
August 2008
ICS 49.100

English Version
Aircraft ground support equipment - Specific requirements - Part
10: Container/Pallet transfer transporters
Matériels au sol pour aéronefs - Exigences particulières - Luftfahrt-Bodengeräte - Besondere Anforderungen - Teil
Partie 10: Transporteurs de conteneurs et de palettes 10: Container-/Paletten-Transfer-Transporter
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 274.
This draft amendment A1, if approved, will modify the European Standard EN 12312-10:2005. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12312-10:2005/prA1:2008: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 12312-10:2005/kprA1:2008
EN 12312-10:2005/prA1:2008 (E)
Contents Page
Foreword.3
1 Modification to the Foreword .4
2 Modification to Clause 1 .4
3 Modifications to Clause 2 .4
4 Modification to 3.2 and 3.3.4
5 Modification to 5.1.1 .4
6 Modification to 5.7 .4
7 Modification to Clause 7 .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 12312-9:2014(Main)
Aircraft ground support equipment - Specific requirements - Part 9: Container/Pallet loaders
EN 12312-9:2013

This European Standard specifies the technical requirements to minimise the hazards listed in Clause 4 which can arise during the commissioning, the operation and the maintenance of container/pallet loaders when used as intended, including misuse reasonably foreseeable by the manufacturer, when carried out in accordance with the specifications given by the manufacturer or his authorised representative. It also takes into account some requirements recognised as essential by authorities, aircraft and ground support equipment (GSE) manufacturers as well as airlines and handling agencies. This document applies to: a) Container/Pallet loader (self-propelled) single platform; b) Container/Pallet loader (self-propelled) two or more platforms; c) Container/Pallet loader/transporter (self-propelled); d) Container/Pallet loader/transfer platform (towed). This document does not establish requirements for noise and vibration. This standard does not deal with hazards in respect to a standard automotive chassis and from other vehicles on the apron. This part of EN 12312 is not applicable to container/pallet loaders which are manufactured before the date of publication of this standard by CEN. This part of EN 12312 when used in conjunction with EN 1915-1, EN 1915-2, EN 1915-3 and EN 1915-4 provides the requirements for container/pallet loaders.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12312-10:2005+A1:2009(Main)
Aircraft ground support equipment - Specific requirements - Part 10: Container/Pallet transfer transporters
EN 12312-10:2005+A1:2009

This European Standard specifies the technical requirements to minimise the hazards listed in Clause 4 which can arise during the commissioning, operation and maintenance of container/pallet transfer transporters when carried out in accordance with the specifications given by the manufacturer or his authorised representative. It also takes into account some performance requirements recognised as essential by authorities, aircraft and ground support equipment (GSE) manufacturers as well as airlines and handling agencies.
This European Standard applies to self-propelled container/pallet transfer transporters, with a seated driver.
Examples of typical transfer transporters are shown in Annex A.
This European Standard does not apply to:
-   loading equipment with a height adjustment capability in excess of 150 mm;
-   transporter-loaders (single platform loader with transporter capability, see EN 12312 9);
-   roller-bed transport platforms mounted on unmodified commercial road chassis.
This European Standard does not establish requirements for noise and vibration.
Noise and vibration are dealt with respectively in EN 1915 4 and EN 1915 3.
This European Standard is not dealing with hazards in respect to a standard automotive chassis and the traffic on the apron.
This Part of EN 12312 is not applicable to GSE which are manufactured before the date of publication by CEN of this European Standard.
NOTE   Certain measurements have been given in imperial units (in parentheses) following the metric measurements since the containers/pallets to be handled are based mainly on the imperial system.
This part of EN 12312 is intended to be used in conjunction with EN 1915-1, EN 1915-2, EN 1915-3 (for vehicles) and EN 1915-4.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12312-11:2005(Main)
Aircraft ground support equipment - Specific requirements - Part 11: Container/Pallet dollies and loose load trailers
EN 12312-11:2005

This European Standard specifies safety requirements for all types of dollies and loose load trailers intended to be used for transportation of baggage and cargo on airports. (Examples see Annex A). This European Standard does not apply to: - trailers of similar design as for use on public roads, e.g. truck type trailers; - unmodified automotive parts when used on container/pallet dollies or loose load trailers for the purpose for which they are designed.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12312-9:2005/kprA1:2008(Amendment)
Aircraft ground support equipment - Specific requirements - Part 9: Container/Pallet loaders
EN 12312-9:2005/prA1
  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12312-9:2014(Main)
Aircraft ground support equipment - Specific requirements - Part 9: Container/Pallet loaders
EN 12312-9:2013

This European Standard specifies the technical requirements to minimise the hazards listed in Clause 4 which can arise during the commissioning, the operation and the maintenance of container/pallet loaders when used as intended, including misuse reasonably foreseeable by the manufacturer, when carried out in accordance with the specifications given by the manufacturer or his authorised representative. It also takes into account some requirements recognised as essential by authorities, aircraft and ground support equipment (GSE) manufacturers as well as airlines and handling agencies. This document applies to: a) Container/Pallet loader (self-propelled) single platform; b) Container/Pallet loader (self-propelled) two or more platforms; c) Container/Pallet loader/transporter (self-propelled); d) Container/Pallet loader/transfer platform (towed). This document does not establish requirements for noise and vibration. This standard does not deal with hazards in respect to a standard automotive chassis and from other vehicles on the apron. This part of EN 12312 is not applicable to container/pallet loaders which are manufactured before the date of publication of this standard by CEN. This part of EN 12312 when used in conjunction with EN 1915-1, EN 1915-2, EN 1915-3 and EN 1915-4 provides the requirements for container/pallet loaders.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12312-10:2005+A1:2009(Main)
Aircraft ground support equipment - Specific requirements - Part 10: Container/Pallet transfer transporters
EN 12312-10:2005+A1:2009

This European Standard specifies the technical requirements to minimise the hazards listed in Clause 4 which can arise during the commissioning, operation and maintenance of container/pallet transfer transporters when carried out in accordance with the specifications given by the manufacturer or his authorised representative. It also takes into account some performance requirements recognised as essential by authorities, aircraft and ground support equipment (GSE) manufacturers as well as airlines and handling agencies.
This European Standard applies to self-propelled container/pallet transfer transporters, with a seated driver.
Examples of typical transfer transporters are shown in Annex A.
This European Standard does not apply to:
-   loading equipment with a height adjustment capability in excess of 150 mm;
-   transporter-loaders (single platform loader with transporter capability, see EN 12312 9);
-   roller-bed transport platforms mounted on unmodified commercial road chassis.
This European Standard does not establish requirements for noise and vibration.
Noise and vibration are dealt with respectively in EN 1915 4 and EN 1915 3.
This European Standard is not dealing with hazards in respect to a standard automotive chassis and the traffic on the apron.
This Part of EN 12312 is not applicable to GSE which are manufactured before the date of publication by CEN of this European Standard.
NOTE   Certain measurements have been given in imperial units (in parentheses) following the metric measurements since the containers/pallets to be handled are based mainly on the imperial system.
This part of EN 12312 is intended to be used in conjunction with EN 1915-1, EN 1915-2, EN 1915-3 (for vehicles) and EN 1915-4.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12312-11:2005(Main)
Aircraft ground support equipment - Specific requirements - Part 11: Container/Pallet dollies and loose load trailers
EN 12312-11:2005

This European Standard specifies safety requirements for all types of dollies and loose load trailers intended to be used for transportation of baggage and cargo on airports. (Examples see Annex A). This European Standard does not apply to: - trailers of similar design as for use on public roads, e.g. truck type trailers; - unmodified automotive parts when used on container/pallet dollies or loose load trailers for the purpose for which they are designed.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12312-9:2005/kprA1:2008(Amendment)
Aircraft ground support equipment - Specific requirements - Part 9: Container/Pallet loaders
EN 12312-9:2005/prA1
  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 3262-18:2023(Main)
Extenders - Specifications and methods of test - Part 18: Precipitated sodium aluminium silicate (ISO 3262-18:2023)
EN ISO 3262-18:2023

This part of ISO 3262 specifies requirements and corresponding methods of test for precipitated sodium aluminium
silicate.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12309-1:2023(Main)
Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 1: Terms and definitions
EN 12309-1:2023

1.1   Scope of EN 12309
Appliances covered by this European Standard include one or a combination of the following:
-   gas-fired sorption chiller;
-   gas-fired sorption chiller/heater;
-   gas-fired sorption heat pump.
This European Standard applies to appliances designed to be used for space heating or cooling or refrigeration with or without heat recovery.
This European Standard applies to appliances having flue gas systems of type B and C (according to CEN/TR 1749) and to appliances designed for outdoor installations. EN 12309 does not apply to air conditioners, it only applies to appliances having:
-   integral burners under the control of fully automatic burner control systems,
-   closed system refrigerant circuits in which the refrigerant does not come into direct contact with the water or air to be cooled or heated,
-   mechanical means to assist transportation of the combustion air and/or the flue gas.
The above appliances can have one or more primary or secondary functions (i.e. heat recovery - see definitions in prEN 12309 1:2012).
In the case of packaged units (consisting of several parts), this standard applies only to those designed and supplied as a complete package.
The appliances having their condenser cooled by air and by the evaporation of external additional water are not covered by EN 12309.
Installations used for heating and/or cooling of industrial processes are not within the scope of EN 12309.
All the symbols given in this text should be used regardless of the language used.
1.2   Scope of this Part 1 of EN 12309
This part of this European Standard specifies the terms and definitions for gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day