EN 62453-302:2009
(Main)Field device tool (FDT) interface specification - Part 302: Communication profile integration - IEC 61784 CPF 2
Field device tool (FDT) interface specification - Part 302: Communication profile integration - IEC 61784 CPF 2
IEC 62453-302:2009(E) provides information for integrating the CIP technology into the FDT interface specification (IEC 62453-2). It specifies communication and other services. This specification neither contains the FDT specification nor modifies it. Communication Profile Family 2 (commonly known as CIPTM1) defines communication profiles based on IEC 61158-2 Type 2, IEC 61158-3-2, IEC 61158-4-2, IEC 61158-5-2, IEC 61158-6-2, and IEC 62026-3. The basic profiles CP 2/1 (ControlNetTM2), CP 2/2 (EtherNet/IPTM3), and CP 2/3 (DeviceNetTM1) are defined in IEC 61784-1 and IEC 61784-2. An additional communication profile (CompoNetTM1), also based on CIPTM, is defined in [14]. This publication is to be read in conjunction with IEC 62453-2:2009.
Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 302: Integration von Kommunikationsprofilen - Kommunikationsprofilfamilie (CPF) 2 nach IEC 61784
Spécification des interfaces des outils des dispositifs de terrain (FDT) - Partie 302: Intégration des profils de communication - CEI 61784 CPF 2
La CEI 62453-302:2009 fournit des informations sur l'intégration de la technologie CIP dans la spécification des interfaces des outils des dispositifs de terrain (FDT) (CEI 62453 2). Elle spécifie la communication et d'autres services. La présente partie, conjointement aux autres parties de la première édition de la série CEI 62453, annule et remplace la CEI/PAS 62453-1, la CEI/PAS 62453-2, la CEI/PAS 62453-3, la CEI/PAS 62453-4 et la CEI/PAS 62453-5 publiées en 2006, et constitue une révision technique. La présente version bilingue (2013-07) correspond à la version anglaise monolingue publiée en 2009-06. Cette publication doit être lue conjointement avec la CEI 62453-2:2009.
Specifikacija vmesnika orodja procesne naprave - 302. del: Integracija komunikacijskih profilov - IEC 61784 CPF 2 (IEC 62453-302:2009)
Družina komunikacijskih profilov 2 (splošno znana kot CIP™1) opredeljuje komunikacijske profile, osnovane na IEC 61158-2, tipu 2, IEC 61158-3-2, IEC 61158-4-2, IEC 61158-5-2, IEC 61158-6-2 in IEC 62026-3. Osnovni profili CP 2/1 (ControlNet™2), CP 2/2 (EtherNet/IP™3) in CP 2/3 (DeviceNet™1) so določeni v IEC 61784-1 in IEC 61784-2. Dodatni komunikacijski profil (CompoNet™1), prav tako osnovan na CIP™, je določen v [14]. Ta del IEC 62453 podaja informacije za integriranje CIP™ tehnologije v specifikacijo vmesnika orodja procesne naprave (IEC 62453-2). Ta del IEC 62453 opredeljuje komunikacijo in druge storitve. Ta specifikacija ne vsebuje specifikacije orodja procesne naprave niti je ne spreminja.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 62453-302:2010
01-januar-2010
Specifikacija vmesnika orodja procesne naprave - 302. del: Integracija
komunikacijskih profilov - IEC 61784 CPF 2 (IEC 62453-302:2009)
Field device tool interface specification -- Part 302: Communication profile integration -
IEC 61784 CPF 2
Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 302: Integration von
Kommunikationsprofilen - IEC 61784 Kommunikationsprofilfamilie (CPF) 2
Spécification des interfaces des outils des dispositifs de terrain (FDT) - Partie 302:
Intégration des profils de communication - CEI 61784 CPF 2
Ta slovenski standard je istoveten z: EN 62453-302:2009
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
SIST EN 62453-302:2010 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 62453-302:2010
---------------------- Page: 2 ----------------------
SIST EN 62453-302:2010
EUROPEAN STANDARD
EN 62453-302
NORME EUROPÉENNE
October 2009
EUROPÄISCHE NORM
ICS 25.040.40; 35.100.05; 35.110
English version
Field device tool (FDT) interface specification -
Part 302: Communication profile integration -
IEC 61784 CPF 2
(IEC 62453-302:2009)
Spécification des interfaces des outils Field Device Tool (FDT)-
des dispositifs de terrain (FDT) - Schnittstellenspezifikation -
Partie 302: Intégration des profils Teil 302: Integration von
de communication - Kommunikationsprofilen -
CEI 61784 CPF 2 Kommunikationsprofilfamilie (CPF) 2
(CEI 62453-302:2009) nach IEC 61784
(IEC 62453-302:2009)
This European Standard was approved by CENELEC on 2009-08-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: Avenue Marnix 17, B - 1000 Brussels
© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62453-302:2009 E
---------------------- Page: 3 ----------------------
SIST EN 62453-302:2010
EN 62453-302:2009 - 2 -
Foreword
The text of document 65E/126/FDIS, future edition 1 of IEC 62453-302, prepared by SC 65E, Devices and
integration in enterprise systems, of IEC TC 65, Industrial-process measurement, control and automation,
was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62453-302 on
2009-08-01.
Each part of the EN 62453-3xy series is intended to be read in conjunction with EN 62453-2.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-05-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2012-08-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62453-302:2009 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
[2] IEC 61131-3 NOTE Harmonized as EN 61131-3:2003 (not modified).
[4] IEC/TR 62453-41 NOTE Harmonized as CLC/TR 62453-41:2009 (not modified).
[5] IEC/TR 62453-502 NOTE Harmonized as CLC/TR 62453-502:2009 (not modified).
__________
---------------------- Page: 4 ----------------------
SIST EN 62453-302:2010
- 3 - EN 62453-302:2009
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of t
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.