Products systems for the protection and repair of concrete structures - Test methods - Determination of time of efflux of cementitious injection products

This document describes a test method for determining the time of efflux of cementitious injection products, based on the measurement of the time taken for a standard volume of the product to flow through a standardised cone (Marsh cone). This time of efflux is a measure of the viscosity of cementitious injection products.

Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Prüfverfahren - Bestimmung der Ausflusszeit von zementartigen Rissfüllstoffen

Diese Europäische Norm beschreibt ein Prüfverfahren zur Bestimmung der Ausflusszeit von zementartigen Rissfüllstoffen auf der Grundlage der Messung der Zeit, die eine genormte Menge des Rissfüllstoffes benötigt, um durch einen genormten Konus (Marsh-Konus) zu fließen. Diese Ausflusszeit ist ein Maß für die Viskosität von zementartigen Rissfüllstoffen

Produits et systemes de protection et de réparation des structures en béton - Méthodes d'essai - Détermination du temps d'écoulement de produits d'injection a base de ciment

Le présent document décrit une méthode d'essai pour déterminer le temps d'écoulement des produits d'injection a base de ciment, basée sur le mesurage du temps d'écoulement d'un volume spécifié de produit au travers d'un cône normalisé (cône de Marsh). Ce temps d'écoulement est une mesure de la viscosité des produits d'injection a base de ciment.

Proizvodi in sistemi za zaščito in popravilo betonskih konstrukcij – Preskusne metode – Določevanje časa iztekanja cementne injekcijske mase skozi standardni konus

General Information

Status
Published
Publication Date
30-Nov-2004
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Dec-2004
Due Date
01-Dec-2004
Completion Date
01-Dec-2004

Buy Standard

Standard
EN 14117:2004
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.NRQXVProdukte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Prüfverfahren - Bestimmung der Ausflusszeit von zementartigen RissfüllstoffenProduits et systemes de protection et de réparation des structures en béton - Méthodes d'essai - Détermination du temps d'écoulement de produits d'injection a base de cimentProducts systems for the protection and repair of concrete structures - Test methods - Determination of time of efflux of cementitious injection products91.100.10Cement. Mavec. Apno. MaltaCement. Gypsum. Lime. Mortar91.080.40Betonske konstrukcijeConcrete structuresICS:Ta slovenski standard je istoveten z:EN 14117:2004SIST EN 14117:2004en01-december-2004SIST EN 14117:2004SLOVENSKI
STANDARD



SIST EN 14117:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14117September 2004ICS 91.100.10 English versionProducts systems for the protection and repair of concretestructures - Test methods - Determination of time of efflux ofcementitious injection productsProduits et systèmes pour la protection et la réparation desstructures en béton - Méthodes d'essai - Détermination dela viscosité de produits d'injection à base de cimentProdukte und Systeme für den Schutz und dieInstandsetzung von Betontragwerken - Prüfverfahren -Bestimmung der Ausflusszeit von zementartigenRissfüllstoffenThis European Standard was approved by CEN on 16 April 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14117:2004: ESIST EN 14117:2004



EN 14117:2004 (E) 2 Contents page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Test principle.4 5 Apparatus.4 6 Sampling and preparation.5 7 Procedure.5 8 Expression of results.5 9 Test report.5
SIST EN 14117:2004



EN 14117:2004 (E) 3 Foreword This document (EN 14117:2004) has been prepared by Technical Committee CEN/TC 104 “Concrete and related products”, the secretariat of which is held by DIN. It has been drafted by Sub-Committee 8 "Products and systems for the protection and repair of concrete structures" (Secretariat AFNOR). This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2005, and conflicting national standards shall be withdrawn at the latest by March 2005.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Ital
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.