SIST EN 13395-4:2002

Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 4: Application of repair mortar overhead

This European Standard specifies a method for determining the applicability overhead of products and systems for the repair of concrete as defined in prEN 1504-3  under usual conditions.
NOTE   This method can only demonstrate that products are capable of being applied overhead. It cannot take into account the possible effects of the operative's skill on site.

Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Prüfverfahren - Bestimmung der Verarbeitbarkeit - Teil 4: Überkopfanwendung von Instandsetzungsmörtel

Diese Europäische Norm enthält Festlegungen für ein Verfahren zur Bestimmung der Anwendbarkeit von Produkten und Systemen für den Schutz und die Instandsetzung von Beton nach prEN 1504-3 auf überkopfbefindlichen Flächen unter üblichen Bedingungen. Anmerkung: Dieses Verfahren dient nur dem Nachweis, daß das Produkt prinzipiell für die Überkopfanwendung geeignet ist. Mögliche Einflüsse durch die jeweiligen handwerklichen Fähigkeiten vor Ort könne in diesem Verfahren nicht berücksichtigt werden.

Produits et systemes pour la protection et la réparation des structures en béton - Méthodes d'essai - Détermination de la maniabilité - Partie 4: Application de mortier de réparation en sous-face

La présente Norme européenne spécifie une méthode pour déterminer l'aptitude a l'emploi de produits et de systemes pour la protection et pour la réparation du béton tels que définis dans le prEN 1504-3 ) en sous-face (plafonds) dans des conditions normales.
NOTE   La présente méthode ne peut qu'attester que le produit est principalement apte a etre appliqué en sous-face (plafond). Elle ne tient pas compte des effets possibles des compétences de l'applicateur sur le chantier.

Proizvodi in sistemi za zaščito in popravilo betonskih konstrukcij - Preskusne metode - Določevanje obdelavnosti - 4. del: Uporabnost malte za popravila nad glavo

General Information

• Status: Published
• Publication Date: 31-Oct-2002
• ICS: 91.080.40 - Concrete structures
• ICS: 91.100.10 - Cement. Gypsum. Lime. Mortar
• Technical Committee: BBB - Concrete, reinforced concrete and prestressed concrete
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Nov-2002
• Due Date: 01-Nov-2002
• Completion Date: 01-Nov-2002
• Directive: 89/106/EEC - Construction products
• Ref Project: EN 13395-4:2002 - Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 4: Application of repair mortar overhead

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.JODYRProdukte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Prüfverfahren - Bestimmung der Verarbeitbarkeit - Teil 4: Überkopfanwendung von InstandsetzungsmörtelProduits et systemes pour la protection et la réparation des structures en béton - Méthodes d'essai - Détermination de la maniabilité - Partie 4: Application de mortier de réparation en sous-faceProducts and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 4: Application of repair mortar overhead91.100.10Cement. Mavec. Apno. MaltaCement. Gypsum. Lime. Mortar91.080.40Betonske konstrukcijeConcrete structuresICS:Ta slovenski standard je istoveten z:EN 13395-4:2002SIST EN 13395-4:2002en01-november-2002SIST EN 13395-4:2002SLOVENSKI
STANDARD



SIST EN 13395-4:2002



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13395-4May 2002ICS 91.080.40; 91.100.30English versionProducts and systems for the protection and repair of concretestructures - Test methods - Determination of workability - Part 4:Application of repair mortar overheadProduits et systèmes pour la protection et la réparation desstructures en béton - Méthodes d'essai - Détermination dela maniabilité - Partie 4: Application de mortier deréparation en sous-faceProdukte und Systeme für den Schutz und dieInstandsetzung von Betontragwerken - Prüfverfahren -Bestimmung der Verarbeitbarkeit - Teil 4:Überkopfanwendung von InstandsetzungsmörtelThis European Standard was approved by CEN on 4 January 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13395-4:2002 ESIST EN 13395-4:2002



EN 13395-4:2002 (E)2ContentspageForeword.31Scope.42Normative references.43Terms and definitions.44Principle.45Apparatus.46Test procedure.57Test report.5Annex A (normative)
Summary of temperatures and humidities for the curing, conditioning andtesting of repair products and systems.7Bibliography.8SIST EN 13395-4:2002



EN 13395-4:2002 (E)3ForewordThis document EN 13395-4:2002 has been prepared by Technical Committee CEN/TC 104 "Concrete and relatedproducts", the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by November 2002, and conflicting national standards shall be withdrawn at the latestby December 2002.It is one of a series of inter-related parts dealing with the workability of repair grouts, mortars and concretes. Theother parts of this standard are:¾ Part 1: Products and systems for the protection and repair of concrete structures - Test methods -Determination of workability - Part 1: Test for flow of thixotropic mortars.¾ Part 2: Products and systems for the protection and repair of concrete structures - Test methods -Determination of workability - Part 2: Test for flow of grout or mortar.¾ Part 3: Products and systems for the protection and repair of concrete structures - Test methods -Determination of workability - Part 3: Test for flow of concrete.Annex A is normative.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain,Sweden, Switzerland and the United Kingdom.SIST EN 13395-4:2002



EN 13395-4:2002 (E)41 ScopeThis European Standard specifies a method for determining the applicability overhead of products and systems forthe repair of concrete as defined in prEN 1504-31 under usual conditions.NOTEThis method can only demonstrate that
...