SIST EN 62586-1:2014
(Main)Power quality measurement in power supply systems - Part 1: Power Quality Instruments (PQI) (IEC 62586-1:2013)
Power quality measurement in power supply systems - Part 1: Power Quality Instruments (PQI) (IEC 62586-1:2013)
EN IEC 62586-1 specifies product and performance requirements for instruments whose functions include measuring, recording and possibly monitoring power quality parameters in power supply systems, and whose measuring methods (class A or class S) are defined in IEC 61000-4-30. These requirements are applicable in single, dual- (split phase) and 3-phase a.c. power supply systems at 50 Hz or 60 Hz. These instruments can be used: - in the generation, transmission and distribution of electricity, for example inside a power station, substation or a distributed generator connection. - at the interface point between the installation and the network, e.g. in order to check the compliance of the connection agreement between a network operator and the customer. Devices such as digital fault recorders, energy/power meters, protection relays or circuit breakers may include power quality functions defined in 61000-4-30 class A or class S. If such devices are specified according to this standard, then this standard fully applies and applies in addition to the relevant product standard. This standard does not replace the relevant product standard.
Messung der Spannungsqualität in Energieversorgungssystemen -Teil 1: Messgeräte für die Spannungsqualität (IEC 62586-1:2013)
Mesure de la qualité de l'alimentation dans les réseaux d'alimentation - Partie 1: Instruments de mesure de la qualité de l'alimentation (CIE 62586-1:2013)
L'IEC 62586-1:2013 spécifie les exigences produits et de performances pour les instruments dont les fonctions incluent la mesure, l'enregistrement et éventuellement la surveillance des paramètres de la qualité des réseaux d'alimentation, dont les méthodes de mesure (classe A ou classe S) sont définies dans la IEC 61000-4-30. Ces exigences sont applicables aux réseaux d'alimentation simple, double- (phase divisée) et triphasée c.a. à 50 Hz ou 60 Hz. Les instruments suivants peuvent être utilisés dans la génération, la transmission et la distribution de l'électricité, ou au point d'interface entre l'installation et le réseau. Ces instruments sont installés de façon fixe ou sont portables. Ils sont destinés à un usage intérieur et/ou extérieur. Les appareils tels que les enregistreurs de défauts numériques, les compteurs d'énergie/puissance, les relais de protection ou les disjoncteurs peuvent inclure des fonctions de qualité de l'alimentation définies dans 61000-4-30 classe A ou classe S. Si ces appareils sont spécifiés conformément à cette norme, cette dernière s'applique entièrement et s'applique en supplément à la norme de produit pertinente. La présente norme ne remplace pas la norme de produit pertinente.
Merjenje kakovosti električne energije v napajalnih sistemih - 1. del: Instrumenti za kakovost napajanja (PQI) (IEC 62586-1:2013)
Standard EN IEC 62586-1 določa zahteve za izdelek in delovanje za instrumente, katerih funkcije zajemajo merjenje, beleženje in morebitno nadzorovanje parametrov kakovosti električne energije v napajalnih sistemih ter katerih merilne metode (razred A ali razred S) so določene v standardu IEC 61000-4-30. Te zahteve se uporabljajo v enofaznih, dvofaznih (razdeljena faza) in trifaznih izmeničnih napajalnih sistemih pri 50 Hz ali 60 Hz. Te instrumente je mogoče uporabljati: – pri proizvodnji, prenosu in distribuciji električne energije, na primer v elektrarni, razdelilni postaji ali priključku distribuiranega generatorja; – v točki vmesnika med obratom in omrežjem, npr. da se preveri skladnost dogovora o priključku med upravljavcem omrežja in stranko. Naprave, kot so digitalni snemalniki okvar, merilniki energije/moči, zaščitni releji ali odklopniki, lahko vključujejo funkcije kakovosti napajanja, opredeljene v standardu 61000-4-30, razred A ali razred S. Če so take naprave opredeljene v skladu s tem standardom, ta standard velja v celoti in se uporablja kot dodatek k ustreznemu standardu za proizvod. Ta standard ne nadomešča ustreznega standarda za proizvod.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 62586-1:2014
01-oktober-2014
0HUMHQMHNDNRYRVWLHOHNWULþQHHQHUJLMHYQDSDMDOQLKVLVWHPLKGHO ,QVWUXPHQWL]D
NDNRYRVWQDSDMDQMD 34, ,(&
Power quality measurement in power supply systems - Part 1: Power Quality Instruments
(PQI) (IEC 62586-1:2013)
Messung der Spannungsqualität in Energieversorgungssystemen -Teil 1: Messgeräte für
die Spannungsqualität (IEC 62586-1:2013)
Mesure de la qualité de l'alimentation dans les réseaux d'alimentation - Partie 1:
Instruments de mesure de la qualité de l'alimentation (CIE 62586-1:2013)
Ta slovenski standard je istoveten z: EN 62586-1:2014
ICS:
17.220.20 0HUMHQMHHOHNWULþQLKLQ Measurement of electrical
PDJQHWQLKYHOLþLQ and magnetic quantities
SIST EN 62586-1:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 62586-1:2014
---------------------- Page: 2 ----------------------
SIST EN 62586-1:2014
EUROPEAN STANDARD EN 62586-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2014
ICS 17.220.20
English Version
Power quality measurement in power supply systems - Part 1:
Power quality instruments (PQI)
(IEC 62586-1:2013)
Mesure de la qualité de l'alimentation dans les réseaux Messung der Spannungsqualität in
d'alimentation - Partie 1: Instruments de mesure de la Energieversorgungssystemen - Teil 1: Messgeräte für die
qualité de l'alimentation Spannungsqualität
(CEI 62586-1:2013) (IEC 62586-1:2013)
This European Standard was approved by CENELEC on 2014-01-16. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62586-1:2014 E
---------------------- Page: 3 ----------------------
SIST EN 62586-1:2014
EN 62586-1:2014 - 2 -
Foreword
The text of document 85/460/FDIS, future edition 1 of IEC 62586-1, prepared by IEC/TC 85
"Measuring equipment for electrical and electromagnetic quantities" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 62586-1:2014.
The following dates are fixed:
(dop) 2014-12-20
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2017-01-16
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directive.
For the relationship with EU Directive see informative Annex ZZ, which is an integral part of this
document.
Endorsement notice
The text of the International Standard IEC 62586-1:2013 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60359 NOTE Harmonized as EN 60359.
IEC 61010 Series NOTE Harmonized as EN 61010 Series (partly modified).
---------------------- Page: 4 ----------------------
SIST EN 62586-1:2014
- 3 - EN 62586-1:2014
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu
Publication Year Title EN/HD Year
IEC 60068-1 - Environmental testing - EN 60068-1 -
Part 1: General and guidance
IEC 60068-2-1 - Environmental testing - EN 60068-2-1 -
Part 2-1: Tests - Test A: Cold
IEC 60068-2-2 - Environmental testing - EN 60068-2-2 -
Part 2-2: Tests - Test B: Dry heat
IEC 60068-2-6 - Environmental testing - EN 60068-2-6 -
Part 2-6: Tests - Test Fc: Vibration
(sinusoidal)
IEC 60068-2-14 - Environmental testing - EN 60068-2-14 -
Part 2-14: Tests - Test N: Change of
temperature
IEC 60068-2-27 - Environmental testing - EN 60068-2-27 -
Part 2-27: Tests - Test Ea and guidance:
Shock
IEC 60068-2-31 - Environmental testing - EN 60068-2-31 -
Part 2-31: Tests - Test Ec: Rough
handling shocks, primarily for equipment-
type specimens
IEC 60068-2-52 - Environmental testing - EN 60068-2-52 -
Part 2-52: Tests - Test Kb: Salt mist,
cyclic (sodium chloride solution)
Environmental testing -
IEC 60068-2-57 - EN 60068-2-57 -
Part 2-57: Tests - Test Ff: Vibration -
Time-history and sine-beat method
IEC 60068-2-78 - Environmental testing - EN 60068-2-78 -
Part 2-78: Tests - Test Cab: Damp heat,
steady state
IEC 60529 - Degrees of protection provided by EN 60529 -
enclosures (IP Code)
IEC 60654-1 - Industrial-process measurement and EN 60654-1 -
control equipment - Operating
conditions -
Part 1: Climatic conditions
---------------------- Page: 5 ----------------------
SIST EN 62586-1:2014
EN 62586-1:2014 - 4 -
Publication Year Title EN/HD Year
IEC 60664-1 2007 Insulation coordination for equipment EN 60664-1 2007
within low-voltage systems -
Part 1: Principles, requirements and tests
IEC 60721-3-1 - Classification of environmental EN 60721-3-1 -
conditions -
Part 3: Classification of groups
of environmental parameters
and their severities -
Section 1: Storage
IEC 60721-3-2 - Classification of environmental EN 60721-3-2 -
conditions -
Part 3: Classification of groups of
environmental parameters and their
severities -
Section 2: Transportation
IEC 60721-3-3 - Classification of environmental EN 60721-3-3 -
conditions -
Part 3: Classification of groups of
environmental parameters and their
severities -
Section 3: Stationary use at
weatherprotected locations
IEC 61000-4-7 2002 Electromagnetic compatibility (EMC) - EN 61000-4-7 2002
+A1 2008 Part 4-7: Testing and measurement +A1 2009
techniques - General guide on harmonics
and interharmonics measurements and
instrumentation, for power supply
systems and equipment connected
thereto
IEC 61000-4-15 2010 Electromagnetic compatibility (EMC) - EN 61000-4-15 2011
Part 4-15: Testing and measurement
techniques - Flickermeter - Functional
and design specifications
IEC 61000-4-30 2008 Electromagnetic compatibility (EMC) - EN 61000-4-30 2009
Part 4-30 : Testing and measurement
techniques - Power quality measurement
methods
IEC/TS 61000-6-5 - Electromagnetic compatibilty (EMC) - - -
Part 6-5: Generic standards - Immunity
for power station and substation
environments
IEC 61010-1 2010 Safety requirements for electrical EN 61010-1 2010
equipment for measurement, control
and laboratory use -
Part 1: General requirements
IEC 61010-2-030 - Safety requirements for electrical EN 61010-2-030 -
equipment for measurement, control
and laboratory use -
Part 2-030: Particular requirements for
testing and measuring circuits
---------------------- Page: 6 ----------------------
SIST EN 62586-1:2014
- 5 - EN 62586-1:2014
Publication Year Title EN/HD Year
IEC 62262 - Degrees of protection provided by EN 62262 -
enclosures for electrical equipment
against external mechanical impacts
(IK code)
IEC 62586-2 - Power quality measurement in power EN 62586-2 -
supply systems -
Part 2: Functional tests and uncertainty
requirements
CISPR 22 - Information technology equipment - EN 55022 -
Radio disturbance characteristics - Limits
and methods of measurement
---------------------- Page: 7 ----------------------
SIST EN 62586-1:2014
EN 62586-1:2014 - 6 -
Annex ZZ
(informative)
Coverage of Essential Requirements of EU Directives
This European Standard has been prepared under a mandate given to CENELEC by the
European Commission and the European Free Trade Association and within its scope the
standard covers protection requirements of Annex I Article 1 of the EU Directive 2004/108/EC.
Compliance with this standard provides one means of conformity with the specified essential
requirements of the Directive concerned.
WARNING: Other requirements and other EU Directives may be applicable to the products falling
within the scope of this standard.
---------------------- Page: 8 ----------------------
SIST EN 62586-1:2014
IEC 62586-1
®
Edition 1.0 2013-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Power quality measurement in power supply systems –
Part 1: Power quality instruments (PQI)
Mesure de la qualité de l'alimentation dans les réseaux d'alimentation –
Partie 1: Instruments de mesure de la qualité de l'alimentation
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX V
ICS 17.220.20 ISBN 978-2-8322-1290-5
Warning! Make sure that you obtained this publication from an authorized distributor.
Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 9 ----------------------
SIST EN 62586-1:2014
– 2 – 62586-1 © IEC:2013
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms, definitions, abbreviations, notations and symbols . 9
3.1 General definitions . 9
3.2 Terms and definitions related to environments. 10
3.3 Definitions related to uncertainty . 10
3.4 Notations . 11
3.4.1 Functions . 11
3.4.2 Symbols and abbreviations . 11
3.4.3 Indices . 12
4 Environmental conditions . 12
4.1 General . 12
4.2 Environments FI1, FI2, FI1-H, FI2-H, FO and FO-H . 13
4.3 Environments PI, PI-H, PO and PO-H . 14
4.4 Relationship between ambient air temperature and relative humidity . 15
5 Ratings . 15
5.1 Rated input energising voltages . 15
5.2 Rated frequencies . 15
6 Design and construction . 15
6.1 General . 15
6.2 General architecture . 15
6.3 Functions embedded in PQI-A and PQI-S . 16
6.3.1 PQI-A minimum functions definition . 16
6.3.2 PQI-S minimum functions definition . 17
6.3.3 Summary of IEC 61000-4-30 requirements for functions . 17
6.4 Additional requirements complementary to IEC 61000-4-30 . 18
6.4.1 Data to be provided for testing reasons . 18
6.4.2 Resolution of the presented data . 20
6.4.3 Clarification about “data flagging” . 20
6.4.4 Temperature drift requirement within the rated range of operation for
ambient air temperature . 20
6.5 Safety requirements . 21
6.6 EMC requirements . 22
6.6.1 Emissions . 22
6.6.2 Immunity . 22
6.7 Climatic requirements of PQI . 22
6.8 Mechanical requirements . 22
6.8.1 Product mechanical robustness . 22
6.8.2 Enclosure robustness . 22
6.9 Degree of protection by enclosures . 23
6.10 Start-up requirements . 23
7 Marking and operating instructions . 23
7.1 General . 23
7.2 Marking . 23
---------------------- Page: 10 ----------------------
SIST EN 62586-1:2014
62586-1 © IEC:2013 – 3 –
7.3 Operating instructions . 23
8 Functional, environmental and safety type tests . 24
8.1 General . 24
8.2 Reference conditions for type tests . 24
8.3 Safety tests . 25
8.4 EMC tests . 25
8.4.1 Emissions . 25
8.4.2 Immunity . 25
8.5 Climatic tests . 26
8.6 Mechanical tests . 27
8.6.1 Product mechanical robustness . 27
8.6.2 Degree of protection provide by enclosures for electrical equipment
against external mechanical impacts (IK code) . 28
8.6.3 Degree of protection by enclosure (IP code) . 28
8.7 Functional and uncertainty tests . 28
9 Routine tests . 28
9.1 General . 28
9.2 Protective bonding test . 28
9.3 Dielectric strength test . 28
9.4 Intrinsic uncertainty test . 28
10 Certificates and declarations . 28
11 Re-calibration and re-verification . 28
Annex A (informative) Information about environment H and G described in
IEC/TS 61000-6-5 . 29
Bibliography . 30
Figure 1 – Instrument generic measurement chain . 16
Figure 2 – Uncertainty requirement as a function of temperature . 21
Figure A.1 – Example of power station and substation: selection of the specification
for apparatus and the related connections . 29
Table 1 – Products coding table . 12
Table 2 – Definition of class A products . 12
Table 3 – Definition of class S products . 13
Table 4 – Description of FI1, FI2, FI1-H, FI2-H, FO, FO-H environments . 13
Table 5 – Description of PI, PI-H, PO and PO-H environments . 14
Table 6 – PQI-A functions . 16
Table 7 – PQI-S minimum functions . 17
Table 8 – Summary of measurements requested for testing . 19
Table 9 – Uncertainty multipliers for different temperature ranges . 21
Table 10 – Enclosure mechanical requirements . 22
Table 11 – Minimum IP requirements . 23
Table 12 – Characteristics specification template . 24
Table 13 – Reference conditions for testing . 25
Table 14 – Climatic requirements . 26
Table 15 – Product mechanical requirements . 27
---------------------- Page: 11 ----------------------
SIST EN 62586-1:2014
– 4 – 62586-1 © IEC:2013
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
POWER QUALITY MEASUREMENT IN POWER SUPPLY SYSTEMS –
Part 1: Power quality instruments (PQI)
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62586-1 has been prepared by IEC technical committee 85:
Measuring equipment for electrical and electromagnetic quantities.
The text of this standard is based on the following documents:
FDIS Report on voting
85/460/FDIS 85/466/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts of the IEC 62586 series, published under the general title Power quality
measurement in power supply systems, can be found on the IEC website.
---------------------- Page: 12 ----------------------
SIST EN 62586-1:2014
62586-1 © IEC:2013 – 5 –
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.
---------------------- Page: 13 ----------------------
SIST EN 62586-1:2014
– 6 – 62586-1 © IEC:2013
INTRODUCTION
Electricity as delivered to the network users has several characteristics which are variable
and which affect its usefulness to the network user.
Power quality instruments on the market have different characteristics. This standard provides
a common system of references in order to facilitate their selection, comparison and
evaluation. This standard specifies a classification based on product performances,
environment and safety.
It is acknowledged that IEC 61000-4-30 is a basic EMC publication. Detailed guidance on
instrument performance, performance verification methods, additional influence quantities and
other similar information should, in general, be found in a product standard.
IEC 62586-1 is a product standard that refers to IEC 61000-4-30, IEC 61000-4-7 and
IEC 61000-4-15 for measuring methods. IEC 62586-2 specifies functional tests and
uncertainty requirements for instruments in the scope of IEC 62586-1.
IEC 62586-1 is therefore complementing basic EMC standards with environmental, safety and
performance requirements.
---------------------- Page: 14 ----------------------
SIST EN 62586-1:2014
62586-1 © IEC:2013 – 7 –
POWER QUALITY MEASUREMENT IN POWER SUPPLY SYSTEMS –
Part 1: Power quality instruments (PQI)
1 Scope
This part of IEC 62586 specifies product and performance requirements for instruments
whose functions include measuring, recording and possibly monitoring power quality
parameters in power supply systems, and whose measuring methods (class A or class S) are
defined in IEC 61000-4-30.
These requirements are applicable in single, dual- (split phase) and 3-phase a.c. power
supply systems at 50 Hz or 60 Hz.
These instruments can be used:
– in the generation, transmission and distribution of electricity, for example inside a power
station, substation or a distributed generator connection.
– at the interface point between the installation and the network, e.g. in order to check the
compliance of the connection agreement between a network operator and the customer.
NOTE 1 These instruments can also be used for other applications, e.g. inside commercial / industrial
installations especially where comparable measurements are needed (i.e. data centers or petrochemical plants).
These instruments are fixed-installed or portable. They are intended to be used indoors
and/or outdoors.
Devices such as digital fault recorders, energy/power meters, protection relays or circuit
breakers may include power quality functions defined in 61000-4-30 class A or class S. If
such devices are specified according to this standard, then this standard fully applies and
applies in addition to the relevant product standard. This standard does not replace the
relevant product standard.
NOTE 2 It is not the intent of this standard to address user interface or topics unrelated to device me
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.