iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 60953-2:2001

(Main)

Rules for steam turbine thermal acceptance tests -- Part 2: Method B - Wide range of accuracy for various types and sizes of turbines

Rules for steam turbine thermal acceptance tests -- Part 2: Method B - Wide range of accuracy for various types and sizes of turbines

Provides for acceptance tests of steam turbines of various types and capacities with appropriate measuring uncertainty. Only the relevant portion of these rules will apply to any individual case. The resulting measuring uncertainty of the test result is determined by calculating methods presented in this standard.

Regeln für wärmetechnische Abnahmemessung an Dampfturbinen -- Teil 2: Methode B - Weiter Genauigkeitsbereich für unterschiedliche Bauarten und Baugrößen von Dampfturbinen

Règles pour les essais thermiques de réception des turbines à vapeur -- Partie 2: Méthode B - Précision de divers degrés pour multiples modèles et tailles de turbines

Prévoit des essais de réception de turbines à vapeur de types et puissances variés avec une incertitude de mesure appropriée. Seule la partie correspondante de ces règles s'applique à chaque cas particulier. L'incertitude de mesure du résultat de l'essai est determinée par les méthodes de calcul présentées dans cette norme.

Rules for steam turbine thermal acceptance tests - Part 2: Method B - Wide range of accuracy for various types and sizes of turbines

General Information

Status
Published
Publication Date
28-Feb-2001
ICS
27.040 - Gas and steam turbines. Steam engines
Technical Committee
EPT - Steam turbines
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Mar-2001
Due Date
01-Mar-2001
Completion Date
01-Mar-2001
Ref Project
EN 60953-2:1995 - Rules for steam turbine thermal acceptance tests - Part 2: Method B - Wide range of accuracy for various types and sizes of turbines

Relations

Revises
SIST EN IEC 60953-0:2022 - Rules for steam turbine thermal acceptance tests - Part 0: Wide range of accuracy for various types and sizes of turbines (IEC 60953-0:2022)
Effective Date
21-Jun-2022
Replaced By
SIST EN IEC 60953-0:2022 - Rules for steam turbine thermal acceptance tests - Part 0: Wide range of accuracy for various types and sizes of turbines (IEC 60953-0:2022)
Effective Date
12-Jul-2022

Buy Standard

EN 60953-2:2001EN 60953-2:2001
PreviousNext
Standard
EN 60953-2:2001
English language
120 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60953-2:2001
01-marec-2001
Rules for steam turbine thermal acceptance tests - Part 2: Method B - Wide range
of accuracy for various types and sizes of turbines
Rules for steam turbine thermal acceptance tests -- Part 2: Method B - Wide range of
accuracy for various types and sizes of turbines
Regeln für wärmetechnische Abnahmemessung an Dampfturbinen -- Teil 2: Methode B -
Weiter Genauigkeitsbereich für unterschiedliche Bauarten und Baugrößen von
Dampfturbinen
Règles pour les essais thermiques de réception des turbines à vapeur -- Partie 2:
Méthode B - Précision de divers degrés pour multiples modèles et tailles de turbines
Ta slovenski standard je istoveten z: EN 60953-2:1995
ICS:
27.040 Plinske in parne turbine. Gas and steam turbines.
Parni stroji Steam engines
SIST EN 60953-2:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 2 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 3 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 4 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 5 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 6 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 7 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 8 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 9 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 10 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 11 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 12 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 13 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 14 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 15 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 16 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 17 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 18 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 19 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 20 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 21 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 22 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 23 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 24 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 25 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 26 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 27 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 28 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 29 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 30 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 31 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 32 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 33 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 34 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 35 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 36 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 37 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 38 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 39 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 40 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 41 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 42 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 43 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 44 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 45 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 46 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 47 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 48 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 49 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 50 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 51 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 52 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 53 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 54 ----------------------

SIST EN 60953-2:2001

---------------------- Page: 55 ----------------------

SIST EN 60953-2:2001

----------------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 60953-3:2002(Main)
Rules for steam turbine thermal acceptance tests -- Part 3: Thermal performance verification tests of retrofitted steam turbines
EN 60953-3:2002

This part of EN 60953, also called retrofit code (RC), establishes a supplementary retrofit code for thermal verification tests of retrofitted steam turbines.

  • Standard
    82 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 45510-5-1:2000(Main)
Guides for procurement of power station equipment -- Part 5-1: Steam turbines
EN 45510-5-1:1998

This standard gives guidance on writing the technical specification for the procurement of steam turbines driving generators for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61063:2000(Main)
Acoustics - Measurement of airborne noise emitted by steam turbines and driven machinery
EN 61063:1996

Describes a method for the measurement of noise emitted by steam turbines including driven machinery operating under steady state conditions. The results are expressed in sound power levels and in sound pressure levels. Applies to steam turbines of all sizes without limitation of output.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60953-1:2000(Main)
Rules for steam turbine thermal acceptance tests -- Part 1: Method A - High accuracy for large condensing steam turbines
EN 60953-1:1995

Specifies very accurate testing of steam turbines to obtain the level of performance with minimum measuring uncertainty. Defines uniform rules for preparing and carrying out an evaluation of the acceptance tests. Defines also the conditions under which the acceptance tests shall take place. The cost for conducting this test method will generally be justified economically for large and/or proptotype units.

  • Standard
    85 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 45510-6-9:2000(Main)
Guide for procurement of power station equipment -- Part 6-9: Turbine auxiliaries - Cooling water systems
EN 45510-6-9:1999

This standard gives guidance on writing the technical specification for the procurement of main and auxiliary cooling water systems for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide. This Guide covers: - pump intake screening plant (coarse and fine screens) and associated cleaning systems; - pressure filters; - pipework and valves; - penstock gates; - priming and venting equipment;...

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 45510-6-5:2000(Main)
Guide for procurement of power station equipment -- Part 6-5: Turbine auxiliaries - Dry cooling systems
EN 45510-6-5:1999

This standard gives guidance on writing the technical specification for the procurement of natural draught and mechanical draught dry cooling towers, aircooled condensers and their internals for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide. This Guide covers: - water distribution system; - heat exchangers; - supporting frame and footbrigdes;...

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 45510-5-2:2000(Main)
Guides for procurement of power station equipment -- Part 5-2: Gas turbines
EN 45510-5-2:1998

This standard gives guidance on writing the technical specification for the procurement of gas turbines, including gas turbines for combined-cycle systems, and their auxiliairies for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear pouwer stations. Other possible applications of such equipment have not been considered in the preparation of this guide.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 45510-6-6:2000(Main)
Guide for procurement of power station equipment -- Part 6-6: Turbine auxiliaries - Wet and wet/dry cooling towers
EN 45510-6-6:1999

This standard gives guidance on writing the technical specification for the procurement of natural draught and mechanical draught wet and wet/dry (hybrid) cooling tower and cooling towers internals for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide. This Guide covers: - water distribution system; - spray assembly; - filling (film packing, splash grids or laths, etc.);...

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 45510-6-8:2000(Main)
Guide for procurement of power station equipment -- Part 6-8: Turbine auxiliaries - Cranes
EN 45510-6-8:1999

This standard gives guidance on writing the technical specification for the procurement of any lifting equipment used in the electricity generating stations (power stations). This Guide for procurement is not applicable to equipment used in the nuclear reactor plant area of the nuclear power station. Other possibleapplications of such equipment have been considered in the preparation of this Guide. This Guide covers: - Travelling cranes; - Portal or semi-portal bridge cranes; - Fixed or articulated jigs; - Hoist monorails; - Mobile cranes.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 45510-6-4:2000(Main)
Guide for procurement of power station equipment -- Part 6-4: Turbine auxiliaries - Pumps
EN 45510-6-4:1999

This standard gives guidance on writing the technical specification for the procurement of the pump units for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide. This Guide covers: - Feedwater pumps (including the start-up and booster pumps); Condensate pumps and condensate booster pumps; - Condenser cooling water pumps; - Boiler recirculation pumps;...

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day