SIST EN 1175-3:1998

Safety of industrial trucks - Electrical requirements - Part 3: Specific requirements for the electric power transmission systems of internal combustion engine powered trucks

1.1 This standard specifies the safety requirements for the design and construction of electrical power transmission systems of trucks with internal combustion engines driving one or more generators with outputs up to and including 600 V supplying power to function motors. The Annex A is normative and contains "Generators - Output and test rules".  NOTE 1 : Reference is made to this standard in other standards which cover the non-electrical requirements of the various industrial truck types.     NOTE 2 : This standard does not address the subject of electromagnetic compatibility (EMC).   NOTE 3 : The special requirements for operation in potentially explosive atmospheres are not covered in this standard.  1.2  The requirements of this standard are applicable, when trucks are operated under the following climatic conditions:   - Maximum ambient temperature, continuous duty: +40?C;  - Lowest ambient temperature: -20 ?C;  - Service altitude: up to 2000 m;  - Relative humidity: in the range 30 % to 95 % (non condensing).    1.3  This standard covers specific hazards which could occur during the intended use of trucks. For hazards occurring during construction, transportation, commissioning, de-commissioning and disposal, reference should be made to EN 292.

Sicherheit von Flurförderzeugen - Elektrische Anforderungen - Teil 3: Besondere Anforderungen für elektrische Kraftübertragungssysteme von Flurförderzeugen mit Verbrennungsmotoren

Diese Norm schreibt die Sicherheitsanforderungen und Herstellung der elektrischen Ausrüstung von Flurförderzeugen mit Verbrennungsmotor, der einen oder mehrere Generatoren mit Nennspannungen bis einschließlich 600 V antreibt, die Leistungs-Motoren speisen. Der Anhang A ist normativ und ethält die Anforderungen für "Generatoren-Leistungsabgabe und Prüfanforderungen".

Sécurité des chariots de manutention - Prescriptions électriques - Partie 3: Prescriptions particulieres des systemes a transmission électrique des chariots équipés d'un moteur thermique

La présente norme spécifie les prescriptions de sécurité pour la conception et la construction des systemes a transmission électrique des chariots équipés d'un moteur thermique entraînant un ou plusieurs génératuers dont les sorties, inférieures ou égales a 600 V, alimentent les moteurs de fonctionnement. L'annexe A est normative et traite des "Générateurs - Puissance et regles d'essais".

Varnost vozil za talni transport - Električne zahteve - 3. del: Posebne zahteve za motorna vozila za talni transport z motorjem z notranjim zgorevanjem in električnim prenosnikom

General Information

• Status: Withdrawn
• Publication Date: 31-Mar-1998
• Withdrawal Date: 05-May-2011
• ICS: 43.060.01 - Internal combustion engines for road vehicles in general
• ICS: 53.060 - Industrial trucks
• Technical Committee: DTN - Lift and transport appliances
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 05-May-2011
• Due Date: 28-May-2011
• Completion Date: 06-May-2011
• Directive: 98/37/EC - Machinery
• Mandate: M/BC/CEN/91/1 - Standardization request to CEN/CENELEC concerning machines presenting hazards due to mobility or load lifting
• Ref Project: EN 1175-3:1998 - Safety of industrial trucks - Electrical requirements - Part 3: Specific requirements for the electric power transmission systems of internal combustion engine powered trucks

Relations

• Consolidated By: SIST EN 1175-3:1998+A1:2011 - Safety of industrial trucks - Electrical requirements - Part 3: Specific requirements for the electric power transmission systems of internal combustion engine powered trucks
• Effective Date: 18-Jan-2023
• Consolidated By: SIST EN 1175-3:1998+A1:2011 - Safety of industrial trucks - Electrical requirements - Part 3: Specific requirements for the electric power transmission systems of internal combustion engine powered trucks
• Effective Date: 19-Jan-2023
• Revised: SIST EN 1175-3:1998/kFprA1:2010 - Safety of industrial trucks - Electrical requirements - Part 3: Specific requirements for the electric power transmission systems of internal combustion engine powered trucks
• Effective Date: 22-Dec-2008
• Replaced By: SIST EN 1175-3:1998+A1:2011 - Safety of industrial trucks - Electrical requirements - Part 3: Specific requirements for the electric power transmission systems of internal combustion engine powered trucks
• Effective Date: 01-Jun-2011

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sicherheit von Flurförderzeugen - Elektrische Anforderungen - Teil 3: Besondere Anforderungen für elektrische Kraftübertragungssysteme von Flurförderzeugen mit VerbrennungsmotorenSécurité des chariots de manutention - Prescriptions électriques - Partie 3: Prescriptions particulieres des systemes a transmission électrique des chariots équipés d'un moteur thermiqueSafety of industrial trucks - Electrical requirements - Part 3: Specific requirements for the electric power transmission systems of internal combustion engine powered trucks53.060Industrijski tovornjakiIndustrial tru
...