SIST EN 882:2016

Chemicals used for treatment of water intended for human consumption - Sodium aluminate

This document is applicable to sodium aluminate used for treatment of water intended for human consumption. It describes the characteristics and specifies the requirements of sodium aluminate and refers to the corresponding analytical methods. It gives information for its use in water treatment. It also determines the rules relating to safe handling and use of sodium aluminate (see Annex B).

Produkte zur Aufbereitung von Wasser für den menschlichen Gebrauch - Natriumaluminat

Dieses Dokument gilt für Natriumaluminat zur Aufbereitung von Wasser für den menschlichen Gebrauch. Es beschreibt die Eigenschaften von Natriumaluminat und legt die Anforderungen für Natriumaluminat fest und verweist auf die entsprechenden Analysenverfahren. Es enthält Angaben zur Anwendung von Natriumaluminat in der Wasseraufbereitung. Es legt darüber hinaus Regeln für die sichere Handhabung und Verwendung von Natriumaluminat fest (siehe Anhang B).

Produits chimiques utilisés pour le traitement de l'eau destinée à la consommation humaine - Aluminate de sodium

Le présent document est applicable à l’aluminate de sodium utilisé pour le traitement de l’eau destinée à la consommation humaine. Il spécifie les caractéristiques et les exigences de l’aluminate de sodium et fait référence aux méthodes d’analyse correspondantes. Il donne des informations pour son emploi dans le traitement de l’eau. Il fixe également les règles relatives à la sécurité de manipulation et d’utilisation de l’aluminate de sodium (voir l’Annexe B).

Kemikalije, ki se uporabljajo za pripravo pitne vode - Natrijev aluminat

Ta dokument se uporablja za aluminijev železov (III) sulfat, ki se uporablja za pripravo pitne vode. Opisuje značilnosti aluminijevega železovega (III) sulfata in določa zahteve zanj ter se sklicuje na ustrezne analizne metode. Podaja informacije za njegovo uporabo pri pripravi vode. Določa tudi pravila za varno ravnanje z aluminijevim železovim (III) sulfatom in njegovo uporabo (glej dodatek B).

General Information

• Status: Published
• Public Enquiry End Date: 29-Sep-2015
• Publication Date: 10-Apr-2016
• ICS: 13.060.20 - Drinking water
• ICS: 71.100.80 - Chemicals for purification of water
• Technical Committee: IOVO - Water supply and waste water engineering
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 24-Mar-2016
• Due Date: 29-May-2016
• Completion Date: 11-Apr-2016
• Directive: TP262 - Uredba o pitni vodi
• Ref Project: EN 882:2016 - Chemicals used for treatment of water intended for human consumption - Sodium aluminate

Relations

• Replaces: SIST EN 882:2005 - Chemicals used for treatment of water intended for human consumption - Sodium aluminate
• Effective Date: 01-May-2016
• Revised: oSIST prEN 882:2025 - Chemicals used for treatment of water intended for human consumption - Sodium aluminate
• Effective Date: 19-Jan-2023

Overview

EN 882:2016 (CEN) specifies requirements for sodium aluminate when used in the treatment of water intended for human consumption. Approved by CEN in January 2016, this European Standard supersedes EN 882:2004 and covers identification, properties, purity criteria, analytical methods, guidance for use in water treatment, and rules for safe handling (Annex B).

Key SEO terms: EN 882:2016, sodium aluminate, water treatment, drinking water, CEN, chemical safety.

Key topics and technical requirements

• Scope and applicability: Applies to sodium aluminate used for drinking-water treatment; provides characteristic definitions and references to analytical methods.
• Identification and composition:
  • Chemical names: aluminium sodium oxide / aluminium sodium dioxide / aluminium sodium tetrahydroxide.
  • Common name: sodium aluminate.
  • CAS numbers: 1302-42-7; 12251-53-5. EINECS: 215-100-1; 235-487-0.
• Commercial forms: Solids (powder, granules) and aqueous solutions (colourless to yellow).
• Physical properties:
  • Solid absolute density: 2.35 g/cm3; tamped bulk density (powder) ~1.0–1.2 g/cm3.
  • Solution density: ~1.5 g/ml for 10 % Al (mass fraction of aluminium).
  • Solubility: soluble in water up to ~12.7 % Al at 20 °C; hydrolysis and precipitation may occur with dilution/temperature changes.
  • Viscosity examples: at 20 °C, ~120 mPa·s for 10 % Al and ~560 mPa·s for 12.7 % Al solutions (viscosity increases at lower temperatures).
• Purity and impurities: The standard defines purity criteria, allowable impurities and chemical parameters for commercial products.
• Test methods and sampling: References and requirements for sampling solids and liquids and for analytical testing (normative references).
• Labelling, transport and storage: Requirements in accordance with EU labelling rules (Regulation (EC) No 1272/2008), transportation regulations, marking and storage conditions, including long-term stability and incompatibilities.
• Safety: Annex B contains rules for safe handling, emergency procedures for spills, accidents and fires.

Applications and who uses it

• Practical use: Standard applies where sodium aluminate is supplied, specified, or tested for treatment of drinking water - including formulation control, delivery and on-site handling.
• Typical users:
  • Water utilities and water treatment plant operators
  • Chemical suppliers and manufacturers of treatment chemicals
  • Test laboratories and quality control analysts
  • Regulatory bodies and procurement specialists
  • Environmental and safety officers responsible for storage, transport and emergency response

Related standards

• EN 1302 - Aluminium-based coagulants - Analytical methods
• ISO 3165, ISO 6206, ISO 8213 - Sampling standards for chemical products

EN 882:2016 is a practical reference for ensuring sodium aluminate quality, safe use and regulatory compliance in drinking-water treatment operations.

Standards Content (Sample)

SLOVENSKI STANDARD
01-maj-2016
1DGRPHãþD
SIST EN 882:2005
Kemikalije, ki se uporabljajo za pripravo pitne vode - Natrijev aluminat
Chemicals used for treatment of water intended for human consumption - Sodium
aluminate
Produkte zur Aufbereitung von Wasser für den menschlichen Gebrauch -
Natriumaluminat
Produits chimiques utilisés pour le traitement de l'eau destinée à la consommation
humaine - Aluminate de sodium
Ta slovenski standard je istoveten z: EN 882:2016
ICS:
13.060.20 Pitna voda Drinking water
71.100.80 .HPLNDOLMH]DþLãþHQMHYRGH Chemicals for purification of
water
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 882
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2016
EUROPÄISCHE NORM
ICS 71.100.80 Supersedes EN 882:2004
English Version
Chemicals used for treatment of water intended for human
consumption - Sodium aluminate
Produits chimiques utilisés pour le traitement de l'eau Produkte zur Aufbereitung von Wasser für den
destinée à la consommation humaine - Aluminate de menschlichen Gebrauch - Natriumaluminat
sodium
This European Standard was approved by CEN on 18 January 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 882:2016 E
worldwide for CEN national Members.

Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Description . 6
3.1 Identification . 6
3.1.1 Chemical name . 6
3.1.2 Synonym or common name . 6
3.1.3 Relative molecular mass . 6
3.1.4 Empirical formula . 6
3.1.5 Chemical formula . 6
3.1.6 CAS Registry Number . 7
3.1.7 EINECS reference . 7
3.2 Commercial form . 7
3.3 Physical properties . 7
3.3.1 Appearance . 7
3.3.2 Density . 7
3.3.3 Solubility . 7
3.3.4 Vapour pressure . 7
3.3.5 Boiling point at 100 kPa . 7
3.3.6 Melting or crystallization point . 7
3.3.7 Specific heat . 8
3.3.8 Viscosity (dynamic) . 8
3.3.9 Critical temperature . 8
3.3.10 Critical pressure . 8
3.3.11 Physical hardness . 8
3.4 Chemical properties . 8
4 Purity criteria . 9
4.1 General . 9
4.2 Composition of commercial product . 9
4.3 Impurities and main by-products . 9
4.4 Chemical parameters . 9
5 Test methods . 10
5.1 Sampling . 10
5.1.1 General . 10
5.1.2 Solid . 10
5.1.3 Liquid . 10
5.2 Analyses . 11
6 Labelling – Transportation – Storage . 11
6.1 Means of delivery . 11
6.2 Labelling in accordance with the EU legislation . 11
6.3 Transportation regulations and labelling . 12
6.4 Marking . 13
6.5 Storage . 13
6.5.1 General . 13
6.5.2 Long term stability . 13
6.5.3 Storage incompatibilities . 13
Annex A (informative) General information on sodium aluminate . 14
A.1 Origin . 14
A.1.1 Raw materials . 14
A.1.2 Manufacturing process . 14
A.2 Quality of commercial product . 14
A.3 Use . 17
A.3.1 Function . 17
A.3.2 Form in which it is used . 17
A.3.3 Treatment dose . 17
A.3.4 Means of application . 18
A.3.5 Secondary effects . 18
A.3.6 Removal of excess product . 18
Annex B (normative) General rules relating to safety . 19
B.1 Rules for safe handling and use . 19
B.2 Emergency procedures . 19
B.2.1 Accident . 19
B.2.2 Spillage . 19
B.2.3 Fire . 19
Bibliography . 20

European foreword
This document (EN 882:2016) has been prepared by Technical Committee CEN/TC 164 “Water supply”,
the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2016, and conflicting national standards
shall be withdrawn at the latest by September 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN 882:2004.
Significant technical differences between this edition and EN 882:2004 are as follows:
a) addition of chemical names for aluminium sodium dioxide and for aluminium sodium tetrahydroxide;
b) replacement of warning and safety precautions notes by labelling according to Regulation (EC) No
1272/2008.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Introduction
In respect of potential adverse effects on the quality of water intended for human consumption, caused
by the product covered by this document:
a) this document provides no information as to whether the product may be used without restriction
in any of the Member States of the EU or EFTA;
b) it should be noted that, while awaiting the adoption of verifiable European criteria, existing
national regulations concerning the use and/or the characteristics of this product remain in force.
NOTE Conformity with this document does not confer or imply acceptance or approval of the product in any
of the Member States of the EU or EFTA. The use of the product covered by this document is subject to regulation
or control by National Authorities.
1 Scope
This document is applicable to sodium aluminate used for treatment of water intended for human
consumption. It describes the characteristics and specifies the requirements of sodium aluminate and
refers to the corresponding analytical methods. It gives information for its use in water treatment. It
also determines the rules relating to safe handling and use of sodium aluminate (see Annex B).
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
EN 1302, Chemicals used for treatment of water intended for human consumption - Aluminium-based
coagulants - Analytical methods
ISO 3165, Sampling of chemical products for industrial use — Safety in sampling
ISO 6206, Chemical products for industrial use — Sampling — Vocabulary
ISO 8213, Chemical products for industrial use — Sampling techniques — Solid chemical products in the
form of particles varying from powders to coarse lumps
3 Description
3.1 Identification
3.1.1 Chemical name
Aluminium sodium oxide
Aluminium sodium dioxide
Aluminium sodium tetrahydroxide
3.1.2 Synonym or common name
Sodium aluminate
3.1.3 Relative molecular mass
82 for NaAlO
2.
3.1.4 Empirical formula
NaAlO 0,1 Na O.nH O (n varies from 0,3 to 0,4)
2 2 2
3.1.5 Chemical formula
NaAlO
1)
3.1.6 CAS Registry Number
1302-42-7
12251-53-5
2)
3.1.7 EINECS reference
215-100-1
...