SIST EN 13523-17:2012

Coil coated metals - Test methods - Part 17: Adhesion of strippable films

This part of EN 13523 describes two methods for determining the numerical evaluation of the adhesion of strippable films which have previously been applied to an organic coating on a metallic substrate.

Bandbeschichtete Metalle - Prüfverfahren - Teil 17: Haftfestigkeit von abziehbaren Folien

Dieser Teil von EN 13523 beschreibt zwei Verfahren zum zahlenmäßigen Bewerten der Haftfestigkeit von
abziehbaren Folien, die auf eine organische Beschichtung auf einem metallischen Substrat aufgebracht wurden.
Es können Proben geprüft werden, unabhängig davon, ob die Folie im Laboratorium oder in der Produktionsanlage
aufgebracht wurde.
ANMERKUNG Verfahren 1 wird bevorzugt für Folien mit Klebstoff und Verfahren 2 bevorzugt für Folien ohne Klebstoff
angewandt.

Tôles prélaquées - Méthodes d'essai - Partie 17: Adhérence des films pelables

La présente Norme européenne spécifie deux méthodes de quantification de l’adhérence des films pelables préalablement appliqués sur un revêtement organique recouvrant un subjectile métallique. L’essai peut être indifféremment effectué sur des échantillons dont le film pelable a été appliqué en laboratoire ou sur la chaîne de production. NOTE La méthode 1 est préconisée pour les films comportant un adhésif et la méthode 2 pour ceux n’en comportant pas.

Kovine, prevlečene v svitkih - Preskusne metode - 17. del: Oprijemljivost zaščitnih folij

Ta del standarda EN 13523 opisuje dve metodi za določanje številskega vrednotenja oprijemljivosti zaščitnih folij, ki so bile pred tem nanesene na organski premaz na kovinski podlagi.

General Information

• Status: Withdrawn
• Public Enquiry End Date: 19-May-2010
• Publication Date: 09-Jan-2012
• Withdrawal Date: 08-Oct-2019
• ICS: 25.220.60 - Organic coatings
• Technical Committee: IBLP - Paints and varnishes
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 09-Oct-2019
• Due Date: 01-Nov-2019
• Completion Date: 09-Oct-2019
• Ref Project: EN 13523-17:2011 - Coil coated metals - Test methods - Part 17: Adhesion of strippable films

Relations

• Replaced By: SIST EN 13523-17:2019 - Coil coated metals - Test methods - Part 17: Adhesion of strippable films
• Effective Date: 01-Nov-2019
• Replaces: SIST EN 13523-17:2005 - Coil coated metals - Test methods - Part 17: Adhesion of strippable films
• Effective Date: 01-Feb-2012
• Replaces: SIST EN 13523-17:2005 - Coil coated metals - Test methods - Part 17: Adhesion of strippable films
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.IROLMBandbeschichtete Metalle - Prüfverfahren - Teil 17: Haftfestigkeit von abziehbaren FolienTôles prélaquées - Méthodes d'essai - Partie 17: Adhérence des films pelablesCoil coated metals - Test methods - Part 17: Adhesion of strippable films25.220.60Organske prevlekeOrganic coatingsICS:Ta slovenski standard je istoveten z:EN 13523-17:2011SIST EN 13523-17:2012en,fr,de01-februar-2012SIST EN 13523-17:2012SLOVENSKI
STANDARDSIST EN 13523-17:20051DGRPHãþD



SIST EN 13523-17:2012



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13523-17
December 2011 ICS 25.220.60 Supersedes EN 13523-17:2004English Version
Coil coated metals - Test methods - Part 17: Adhesion of strippable films
Tôles prélaquées - Méthodes d'essai - Partie 17: Adhérence des films pelables
Bandbeschichtete Metalle - Prüfverfahren - Teil 17: Haftfestigkeit von abziehbaren Folien This European Standard was approved by CEN on 15 October 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13523-17:2011: ESIST EN 13523-17:2012



EN 13523-17:2011 (E) 2 Contents Page Foreword . 31Scope . 52Normative references . 53Terms and definitions . 54Principle . 55Apparatus . 55.1For method 1 . 55.2For method 2 . 66Sampling . 67Test panels . 68Procedure . 68.1Panel preparation. 68.1.1Self-adhesive strippable film . 68.1.2Non-adhesive strippable film . 68.2Determination . 78.2.1Method 1 . 78.2.2Method 2 . 88.3Evaluation and expression of results . 99Precision . 910Test report . 9Bibliography . 10 SIST EN 13523-17:2012



EN 13523-17:2011 (E) 3 Foreword This document (EN 13523-17:2011) has been prepared by Technical Committee CEN/TC 139 “Paints and varnishes”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2012, and conflicting national standards shall be withdrawn at the latest by June 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13523-17:2004. EN 13523, Coil coated metals — Test methods, consists of the following parts:  Part 0: General introduction and list of test methods;  Part 1: Film thickness;  Part 2: Specular gloss;  Part 3: Colour difference - Instrumental comparison;  Part 4: Pencil hardness;  Part 5: Resistance to rapid deformation (impact test);  Part 6: Adhesion after indentation (cupping test);  Part 7: Resistance to cracking on bending (T-bend test);  Part 8: Resistance to salt spray (fog);  Part 9: Resistance to water immersion;  Part 10: Resistance to fluorescent UV radiation and water condensation;  Part 11: Resistance to solvents (rubbing test);  Part 12: Resistance to scratching;  Part 13: Resistance to accelerated ageing by the use of heat;  Part 14: Chalking (Helmen method);  Part 15: Metamerism;  Part 16: Resistance to abrasion;  Part 17: Adhesion of strippable films;  Part 18: Resistance to staining; SIST EN 13523-17:2012



EN 13523-17:2011 (E) 4  Part 19: Panel design and method of atmospheric exposure testing;  Part 20: Foam adhesion;  Part 21: Evaluation of outdoor exposed panels;  Part 22: Colour difference - Visual comparison;  Part 23: Colour stability in humid atmospheres containing sulfur dioxide;  Part 24: Resistance to blocking and pressure marking;  Part 25: Resistance to humidity;  Part 26: Resistance to condensation of water;  Part 27: Resistance to humid poultice (Cataplasm test);  Part 29: Resistance to environmental soiling (Dirt p
...