SIST EN 10120:1997

Steel sheet and strip for welded gas cylinders

1.1  This European Standard spec4f ies requirements for hot-rol-led sheet and strip up to 5 mm thickness made of steels listed in table 1 and intended for manufacturing welded gas cylinders.           1.2  The general technical delivery conditions in EN 10021 also apply to products supplied in accordance with this European Standard.           1.3    This European Standard does not apply to sheet and strip made of:           -    general structural steels (see EN 10025);           -    non-alloy and alloy steels for pressure vessels (see EN 10028-1 to 10028-6);           -    low carbon non-alloy steels for cold forming (see EN 10111 and EN 10130);  -    steels with a high yield strength for cold forming (see EN 10149); -    cold-rolled strip up to 600 mm wide of low carbon non-alloy steels (see EN 10139); -    steels for simple pressures vessels (see EN 10207).

Stahlblech und -band für geschweißte Gasflaschen

1.1 Diese Europäische Norm legt die Anforderungen an warmgewalztes Blech und Band bis 5 mm Dicke aus tiefziehfähigen Stählen nach Tabelle 1 fest. 1.2 Für nach dieser Europäischen Norm gelieferte Erzeugnisse gelten zusätzlich die allgemeinen technischen Lieferbedingungen nach EN 10021.

Tôles et bandes pour bouteilles a gaz soudées en acier

1.1 La présente norme européenne définit les prescriptions concernant les tôleset bandes laminées a chaud d'épaisseur inférieure ou égale a 5 mm en acier apte a l'emboutissage profond, telles qu'énumérées au tableau 1. 1.2 Les conditions générales techniques de livraison de l'EN 10021 s'appliquent également aux produits fournis en conformité avec la présente norme européenne.

Jeklene pločevine in trakovi za plinske jeklenke

General Information

• Status: Withdrawn
• Publication Date: 30-Nov-1997
• Withdrawal Date: 14-Sep-2008
• ICS: 77.140.50 - Flat steel products and semi-products
• Technical Committee: IFEK - Ferrous metals
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 08-Sep-2008
• Due Date: 01-Oct-2008
• Completion Date: 15-Sep-2008
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: EN 10120:1996 - Steel sheet and strip for welded gas cylinders

Relations

• Replaced By: SIST EN 10120:2008 - Steel sheet and strip for welded gas cylinders
• Effective Date: 01-Nov-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Stahlblech und -band für geschweißte GasflaschenTôles et bandes pour bouteilles a gaz soudées en acierSteel sheet and strip for welded gas cylinders77.140.50SROL]GHONLFlat steel products and semi-productsICS:Ta slovenski standard je istoveten z:EN 10120:1996SIST EN 10120:1997en01-decemb
...