SIST EN 15347-5:2025
(Main)Plastics - Sorted plastics wastes - Part 5: Quality grades of sorted poly(vinyl chloride) (PVC) wastes and specific test methods
Plastics - Sorted plastics wastes - Part 5: Quality grades of sorted poly(vinyl chloride) (PVC) wastes and specific test methods
This document specifies the quality grades for sorted poly(vinyl chloride) (PVC) wastes as well as specific test methods laying out those properties for which the supplying party of the waste makes information available to the receiving party. PVC waste quality grades are based on pre-determined sets of characteristics, taking into account sectorial and market specificities and related information needs and tests methods. The document provides for a division of information between “Required Data”, where a statement is required, and additional “Optional Data” as agreed between the supplying and receiving party.
This document does not apply to the general characterization addressed in EN 15347-1.
Kunststoffe - Sortierte Kunststoffabfälle - Teil 5: Qualitätsstufen von sortierten Polyvinylchlorid(PVC)-Abfällen und spezifische Prüfverfahren
Dieses Dokument legt die Güteklassen für sortierte Polyvinylchlorid(PVC)-Abfälle sowie spezifische Prüfverfahren fest, nach denen jene Eigenschaften umrissen werden, zu denen die Partei, die den Abfall liefert, der Partei, die diesen entgegen nimmt, Informationen zugänglich macht. Güteklassen von PVC-Abfällen beruhen auf einer Anzahl zuvor bestimmter Eigenschaften unter Berücksichtigung von sektor- und marktspezifischen Gesichtspunkten sowie damit in Zusammenhang stehenden Informationsanforderungen und Prüfverfahren. Das Dokument beinhaltet die Unterscheidung von Informationen in „geforderte Daten“, deren Angabe erforderlich ist, und „optionale Daten“, wie zwischen der liefernden Partei und der entgegennehmenden Partei vereinbart.
Dieses Dokument ist nicht für die allgemeine Charakterisierung, die in EN 15347-1 behandelt wird, anwendbar.
Plastiques - Déchets de plastiques triés - Partie 5: Grades de qualité des déchets de poly(chlorure de vinyle) (PVC) triés et méthodes d’essai spécifiques
Le présent document spécifie les grades de qualité pour les déchets de poly(chlorure de vinyle) (PVC) triés, ainsi que des méthodes d’essai spécifiques, en présentant les propriétés pour lesquelles la partie émettrice de ces déchets met des informations à la disposition de la partie réceptrice. Les grades de qualité des déchets de PVC sont basés sur des ensembles de caractéristiques prédéterminés, tenant compte des spécificités du secteur et du marché et des besoins correspondants en termes d’informations et de méthodes d’essai. Le présent document fait une distinction entre les « Données requises », pour lesquelles une déclaration est demandée, et les « Données optionnelles » supplémentaires qui sont fournies selon l’accord entre la partie émettrice et la partie réceptrice.
Le présent document ne s’applique pas la caractérisation générale, qui est traitée dans l’EN 15347-1.
Polimerni materiali - Razvrščeni odpadki iz polimernih materialov - 5. del: Stopnje kakovosti razvrščenih polivinilkloridnih (PVC) odpadkov in posebne preskusne metode
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2025
Polimerni materiali - Razvrščeni odpadki iz polimernih materialov - 5. del: Stopnje
kakovosti razvrščenih polivinilkloridnih (PVC) odpadkov in posebne preskusne
metode
Plastics - Sorted plastics wastes - Part 5: Quality grades of sorted poly(vinyl chloride)
(PVC) wastes and specific test methods
Kunststoffe - Sortierte Kunststoffabfälle - Teil 5: Qualitätsstufen von sortierten
Polyvinylchlorid(PVC)-Abfällen und spezifische Prüfverfahren
Plastiques - Déchets de plastiques triés - Partie 5: Grades de qualité des déchets de
poly(chlorure de vinyle) (PVC) triés et méthodes d’essai spécifiques
Ta slovenski standard je istoveten z: EN 15347-5:2025
ICS:
13.030.50 Recikliranje Recycling
83.080.20 Plastomeri Thermoplastic materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 15347-5
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2025
EUROPÄISCHE NORM
ICS 13.030.50; 83.080.20
English Version
Plastics - Sorted plastics wastes - Part 5: Quality grades of
sorted poly(vinyl chloride) (PVC) wastes and specific test
methods
Plastiques - Déchets de plastiques triés - Partie 5: Kunststoffe - Sortierte Kunststoffabfälle - Teil 5:
Grades de qualité des déchets de poly(chlorure de Qualitätsstufen von sortierten Polyvinylchlorid(PVC)-
vinyle) (PVC) triés et méthodes d'essai spécifiques Abfällen und spezifische Prüfverfahren
This European Standard was approved by CEN on 21 April 2025.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 15347-5:2025 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms, definitions and abbreviated terms . 6
4 Requirements . 6
4.1 General. 6
4.2 Classification scheme . 7
4.3 PVC Building and Construction – Rigid . 7
4.4 PVC Building and Construction – Flexible . 8
Bibliography . 11
European foreword
This document (EN 15347-5:2025) has been prepared by Technical Committee CEN/TC 249 “Plastics”,
the secretariat of which is held by SIS.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2025, and conflicting national standards shall
be withdrawn at the latest by November 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document is part of CEN publications on plastics recycling, listed as follows:
— EN 15342, Plastics — Recycled plastics — Characterization of polystyrene (PS) recyclates
— EN 15343, Plastics — Recycled plastics — Plastics recycling traceability and assessment of conformity
and recycled content
— EN 15344, Plastics — Recycled plastics — Characterization of polyethylene (PE) recyclates
— EN 15345, Plastics — Recycled plastics — Characterization of polypropylene (PP) recyclates
— EN 15346, Plastics — Recycled plastics — Characterization of poly(vinyl chloride) (PVC) recyclates
— EN 15347 (all parts), Plastics — Sorted plastics wastes
— EN 15348, Plastics — Recycled plastics — Characterization of poly(ethylene terephthalate) (PET)
recyclates
— EN 18064 (all parts), Plastics — Quality recommendations and basis for specifications for application
of plastic recyclates in products
— EN 18065, Plastics — Recycled plastics — Classification of recycled plastics based on Data Quality
Levels for use and (digital) trading
— EN 18067, Plastics — Recycled plastics — Characterization of acrylonitrile-butadiene-styrene (ABS)
recyclates
— CEN/TR 15353, Plastics — Recycled plastics — Guidelines for the development of standards for
recycled plastics
— CEN/TR 18160, Plastics recycling — Classification of plastic recyclates as post-consumer recyclates
(PCR) and post-industrial recyclates (PIR)
This document has been prepared under a standardization request addressed to CEN and CENELEC by
the European Commission. The Standing Committee of the EFTA States subsequently approves these
requests for its Member States.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the United
Kingdom.
Introduction
Polyvinyl chloride (PVC) is broadly used in building and construction in both rigid and flexible
applications including profiles and frames, pipes and fittings, flooring, cables, and insulation materials.
The collection of this PVC waste is organized via private schemes where the waste is sent to recyclers.
Post-consumer waste may have a high content of other impurities coming from demolition waste as well
as glass or metal which will be sorted out during the first steps of the recycling process. PVC waste may
also some from pre-consumer sources during the industrial manufacturing of products.
PVC plastic waste is characterized to determine the composition and quality of the batch. A clear and
harmonized waste specification facilitates a transaction between the supplier and purchaser and
establishes standard characteristics to monitor during any sorting or preparation of waste operations.
This document complements the general characterization of waste described in EN 15347-1 and adds
additional clarification when it comes to the required and optional requirements of PVC waste.
Characteristics are specified for products part of the building and construction sector for both rigid and
flexible applications.
This document has been produced in accordance with the guidance produced by CEN on Environmental
Aspects and in accordance with CEN/TR 15353.
NOTE CEN/TR 15353 considers the general environmental aspects which are specific to the recycling process.
1 Scope
This document specifies the quality grades for sorted poly(vinyl chloride) (PVC) wastes as well as specific
test methods laying out those properties for which the supplying party of the waste makes information
available to the receiving party. PVC waste quality grades are based on pre-determined sets of
characteristics, taking into account sectorial and market specificities and related information needs and
tests methods. The document provides for a division of information between “Required Data”, where a
statement is required, and additional “Optional Data” as agreed between the supplying and receiving
party.
This document does not apply to the general characterization addressed in EN 15347-1.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
CEN/TR 15353, Plastics — Recycled plastics — Guidelines for the development of standards for recycled
plastics
EN 15347-1:2024, Plastics — Sorted plastics wastes — Part 1: General characterisation
EN 17615, Plastics — Environmental Aspects — Vocabulary
EN ISO 1043-1, Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special
characteristics (ISO 1043-1)
3 Terms, definitions and abbreviated terms
For the purposes of this document, the terms and definitions given in EN 17615, EN 15347-1 and
CEN/TR 15353 apply. The abbreviated terms related to recyclates given in EN ISO 1043-1 apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https://www.iso.org/obp
— IEC Electropedia: available at https://www.electropedia.org/
4 Requirements
4.1 General
The characteristics of a batch of PVC sorted plastics waste from building and construction (rigid) to be
provided to the customer by the supplier are given in Table 1 and Table 2. For PVC sorted plastics waste
from building and construction (flexible) refer to Table 3 and Table 4.
The characteristics are divided into two types:
— required characteristics: Needed to characterize the respective plastic wastes from the relevant
sector in general, and required for all batches of the respective sorted plastic waste;
— optional characteristics: Recommended additional information for the characterization of the
respective plastic wastes from the relevant sector.
NOTE In case of transboundary movement, reference can be made to the Basel convention (on transboundary
movement of wastes) and to relevant European regulations.
4.2 Classification scheme
The supplier of a batch of PVC sorted plastics waste shall provide to the purchaser a statement of the
characteristics of the waste listed in Table 1 or 3 (depending on the waste stream processed). Providing
a statement of the characteristics of the waste described in Table 2 or 4 (depending on the waste stream
processed) is also recommended.
4.3 PVC Building and Construction – Rigid
Table 1 — Required characteristics of sorted plastic wastes — PVC Building and Construction
(rigid)
Characteristics Suitable statements/comments Methods/references
General information
Origin Indicate the sector where the material is coming from (e.g. —
household, commercial, industrial, municipal).
Sector of origin Building and construction —
a
Waste category Indicate the six-digit code of incoming waste.
Pre-/Post-consumer Indicate the types of sorted plastics waste. If the batch EN 17615
contains a mix of both, provide their percentages. For
example: Chemical legislation can impose a limit on
regulated substances on the sorted stream acceptable in a
recycling process (e.g. phtalates in flexible PVC), leading the
supplier to provide additional information on this topic.
Colour
Colour Indicate the dominating colour. Visual inspection
Composition
Articles Indicate the type of articles present in the input waste EN 15347-1:2024,
(profiles, sheets, pipes, multilayer pipes, fittings). Annex A
Content of PVC rigid Indicate the main polymer present in the waste stream at EN 15347-1:2024,
article object level and its minimum percentage by weight. Annex A
Other polymers Indicate the presence of any other polymers known and the EN 15347-1:2024,
present maximum percentage by weight. Annex A
Impurities
Flexible PVC Indicate the maximum percentage by weight of flexible PVC. EN 15347-1:2024,
Medical waste and PVC with DEHP plasticizer shall be Annex A
excluded.
Metals Indicate the maximum percentage by weight of ferrous and Visual inspection
non-ferrous metals.
Minerals Indicate the maximum percentage by weight of minerals. Visual inspection
Minerals - indicate only the stones, rocks and similar
extraneous minerals in the sorted plastic. Fillers, wh
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.