SIST EN ISO 1043-1:2012
(Main)Plastics - Symbols and abbreviated terms - Part 1: Basic polymers and their special characteristics (ISO 1043-1:2011)
Plastics - Symbols and abbreviated terms - Part 1: Basic polymers and their special characteristics (ISO 1043-1:2011)
This part of ISO 1043 defines abbreviated terms for the basic polymers used in plastics, symbols for components of these terms, and symbols for special characteristics of plastics. It includes only those abbreviated terms that have come into established use and its aim is both to prevent the occurrence of more than one abbreviated term for a given plastic and to prevent a given abbreviated term being interpreted in more than one way.
Kunststoffe - Kennbuchstaben und Kurzbezeichnungen - Teil 1: Basis-Polymere und ihre besonderen Eigenschaften (ISO 1043-1:2011)
Dieser Teil von ISO 1043 enthält einheitliche Kurzzeichen für Kunststoffe und Kennbuchstaben für den Aufbau dieser Kurzzeichen, wie auch Kennbuchstaben zur Kennzeichnung besonderer Eigenschaften der Kunststoffe. Er enthält nur solche Kurzzeichen, welche in unzweifelhaftem Gebrauch sind mit dem Ziel, sowohl das Auftreten von mehr als einem Kurzzeichen für einen bestehenden Kunststoffnamen als auch die mehrdeutige Interpretation eines Kurzzeichens zu verhüten.
ANMERKUNG 1 Für Kennbuchstaben und Kurzzeichen von Füll- und Verstärkungsstoffen siehe ISO 1043 2, für Weichmacher siehe ISO 1043 3 und für Flammschutzmittel siehe ISO 1043 4. Die Nomenklatur für Kautschuke und Latices ist festgelegt in ISO 1629. Die Nomenklatur für Thermoplastische Elastomere ist gegeben in ISO 18064.
ANMERKUNG 2 Eine Anleitung zur Erstellung von neuen Kurzzeichen steht im Anhang A und eine Referenzliste von Kennbuchstaben für die Bestandteile von Kunststoffen, die zur Bildung von Kurzzeichen gebraucht werden, ist im Anhang B zu finden.
ANMERKUNG 3 Eine Klassifizierung von Kurzzeichen für Polymere nach Art ist im Anhang C enthalten.
Plastiques - Symboles et termes abrégés - Partie 1: Polymères de base et leurs caractéristiques spéciales (ISO 1043-1:2011)
L'ISO 1043-1:2011 définit des termes abrégés pour désigner les polymères de base utilisés dans les plastiques, des symboles correspondant aux composants de ces termes, ainsi que des symboles indiquant les caractéristiques spéciales des plastiques. Elle ne comprend que les termes abrégés dont l'usage est consacré et son but est double: prévenir l'apparition de plusieurs termes abrégés pour un plastique donné et empêcher qu'un terme abrégé donné ne soit interprété de plusieurs façons différentes.
Des indications relatives à l'établissement de nouveaux termes abrégés, des listes de référence des symboles pour les composants des termes désignant des plastiques utilisés pour former les termes abrégés pour les plastiques et une classification des termes abrégés des polymères regroupés par type sont données en annexes.
Polimerni materiali - Simboli in kratice - 1. del: Osnovni polimeri in njihove značilnosti (ISO 1043-1:2011)
Ta del standarda ISO 1043 opredeljuje kratice za osnovne polimere, ki se uporabljajo za izdelavo polimernih materialov, simbole za sestavne dele teh kratic in simbole za posebne značilnosti polimernih materialov. Zajema le tiste kratice, ki se splošno uporabljajo, pri čemer je cilj standarda preprečiti pojav več kot ene kratice za posamezen polimerni material in pojav več pomenov za posamezno kratico.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 1043-1:2012
01-februar-2012
1DGRPHãþD
SIST EN ISO 1043-1:2002
3ROLPHUQLPDWHULDOL6LPEROLLQNUDWLFHGHO2VQRYQLSROLPHULLQQMLKRYH
]QDþLOQRVWL,62
Plastics - Symbols and abbreviated terms - Part 1: Basic polymers and their special
characteristics (ISO 1043-1:2011)
Kunststoffe - Kennbuchstaben und Kurzbezeichnungen - Teil 1: Basis-Polymere und ihre
besonderen Eigenschaften (ISO 1043-1:2011)
Plastiques - Symboles et termes abrégés - Partie 1: Polymères de base et leurs
caractéristiques spéciales (ISO 1043-1:2011)
Ta slovenski standard je istoveten z: EN ISO 1043-1:2011
ICS:
01.075 Simboli za znake Character symbols
83.080.01 Polimerni materiali na Plastics in general
splošno
SIST EN ISO 1043-1:2012 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 1043-1:2012
---------------------- Page: 2 ----------------------
SIST EN ISO 1043-1:2012
EUROPEAN STANDARD
EN ISO 1043-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2011
ICS 83.080.01 Supersedes EN ISO 1043-1:2001
English Version
Plastics - Symbols and abbreviated terms - Part 1: Basic
polymers and their special characteristics (ISO 1043-1:2011)
Plastiques - Symboles et termes abrégés - Partie 1: Kunststoffe - Kennbuchstaben und Kurzzeichen - Teil 1:
Polymères de base et leurs caractéristiques spéciales (ISO Basis-Polymere und ihre besonderen Eigenschaften (ISO
1043-1:2011) 1043-1:2011)
This European Standard was approved by CEN on 12 November 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 1043-1:2011: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 1043-1:2012
EN ISO 1043-1:2011 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 1043-1:2012
EN ISO 1043-1:2011 (E)
Foreword
This document (EN ISO 1043-1:2011) has been prepared by Technical Committee ISO/TC 61 "Plastics" in
collaboration with Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by NBN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by May 2012, and conflicting national standards shall be withdrawn at the
latest by May 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 1043-1:2001.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 1043-1:2011 has been approved by CEN as a EN ISO 1043-1:2011 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 1043-1:2012
---------------------- Page: 6 ----------------------
SIST EN ISO 1043-1:2012
INTERNATIONAL ISO
STANDARD 1043-1
Fourth edition
2011-11-15
Plastics — Symbols and abbreviated
terms —
Part 1:
Basic polymers and their special
characteristics
Plastiques — Symboles et termes abrégés —
Partie 1: Polymères de base et leurs caractéristiques spéciales
Reference number
ISO 1043-1:2011(E)
©
ISO 2011
---------------------- Page: 7 ----------------------
SIST EN ISO 1043-1:2012
ISO 1043-1:2011(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2011 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 1043-1:2012
ISO 1043-1:2011(E)
Contents Page
Foreword . iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Use of symbols and abbreviated terms . 1
5 Abbreviated terms for homopolymers, copolymers and natural polymers . 2
6 Symbols for indication of special characteristics . 5
7 Symbol for plastics recyclate . 6
8 Examples of the use of symbols . 6
Annex A (informative) Guide for preparing new abbreviated terms for basic polymers, mixtures of
polymers and related terms . 7
Annex B (informative) List of symbols used for components of abbreviated terms . 9
Annex C (informative) Abbreviated terms for plastics grouped by type . 12
Bibliography . 15
© ISO 2011 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 1043-1:2012
ISO 1043-1:2011(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 1043-1 was prepared by Technical Committee ISO/TC 61, Plastics, Subcommittee SC 1, Terminology.
This fourth edition cancels and replaces the third edition (ISO 1043-1:2001), which has been technically
revised.
ISO 1043 consists of the following parts, under the general title Plastics — Symbols and abbreviated terms:
Part 1: Basic polymers and their special characteristics
Part 2: Fillers and reinforcing materials
Part 3: Plasticizers
Part 4: Flame retardants
iv © ISO 2011 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 1043-1:2012
INTERNATIONAL STANDARD ISO 1043-1:2011(E)
Plastics — Symbols and abbreviated terms —
Part 1:
Basic polymers and their special characteristics
1 Scope
This part of ISO 1043 defines abbreviated terms for the basic polymers used in plastics, symbols for
components of these terms, and symbols for special characteristics of plastics. It includes only those
abbreviated terms that have come into established use and its aim is both to prevent the occurrence of more
than one abbreviated term for a given plastic and to prevent a given abbreviated term being interpreted in
more than one way.
NOTE 1 For symbols and abbreviated terms for fillers and reinforcing materials, see ISO 1043-2, for plasticizers see
ISO 1043-3, and for flame retardants see ISO 1043-4. Nomenclature for rubbers and latices is given in ISO 1629.
Nomenclature for thermoplastic elastomers is given in ISO 18064.
NOTE 2 Guidance for the preparation of new abbreviated terms is given in Annex A, and reference lists of symbols for
the components of plastics terms used to form the abbreviated terms for plastics are given in Annex B.
NOTE 3 A classification of abbreviated terms for polymers grouped by type is given in Annex C.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 472, Plastics — Vocabulary
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 472 and the following apply.
3.1
abbreviated term
term resulting from the omission of any part of a term while designating the same concept
4 Use of symbols and abbreviated terms
4.1 Abbreviated terms for homopolymers, copolymers and natural polymers are given in Clause 5, symbols
for special characteristics are given in Clause 6, the symbol for plastics recyclate is given in Clause 7, and
examples of the use of symbols are given in Clause 8.
4.2 To distinguish the essential molecular characteristics within a given generic type of plastics material,
additional symbols, with guidance for their use, are provided. The use of symbols for describing properties that
can only be ascertained subjectively should be avoided since this can lead to confusion.
© ISO 2011 – All rights reserved 1
---------------------- Page: 11 ----------------------
SIST EN ISO 1043-1:2012
ISO 1043-1:2011(E)
4.3 The abbreviated terms are primarily intended to be a convenient shorthand for chemical names in
publications and other written matter. The abbreviated terms are also useful for indicating the type of basic
polymer in materials and products, e.g. ABS moulding material, PA film, PE sheeting and PVC pipe.
4.4 Only capital letters shall be used for symbols and abbreviated terms.
4.5 The first appearance of an abbreviated term in a text shall be enclosed in parentheses and shall be
preceded by the term written in full.
4.6 The rules of the International Union of Pure and Applied Chemistry (IUPAC) for source-based names of
polymers recommend the use of parentheses when the prefix “poly” is used with a monomer name consisting
of two or more words. This practice is followed in this part of ISO 1043, but in common usage the enclosing
marks are often omitted.
4.7 No attempt is made formally to systematize a shorthand terminology of polymers. Terminology and
formulae designations for scientific literature in the field of natural and synthetic polymers have been
elaborated by the Commission on Macromolecular Nomenclature of IUPAC. Any abbreviated terms published
by this Commission are, in general, the same as in this part of ISO 1043.
5 Abbreviated terms for homopolymers, copolymers and natural polymers
The following list gives the preferred abbreviated terms for plastics materials, using the component symbols
given in Annex B. For some established materials, the abbreviated terms are supplemented by symbols for
special characteristics as defined in Clause 6.
For some materials, alternative abbreviated terms are often still used, and for information these are included
after the name of the material.
Abbreviated term Term for material
AB acrylonitrile-butadiene plastic
ABAK acrylonitrile-butadiene-acrylate plastic; preferred term for ABA
ABS acrylonitrile-butadiene-styrene plastic
ACS acrylonitrile-(chlorinated polyethylene)-styrene; preferred term for ACPES
AEPDS acrylonitrile-(ethylene-propylene-diene)-styrene plastic; preferred term for AEPDMS
AMMA acrylonitrile-(methyl methacrylate) plastic
ASA acrylonitrile-styrene-acrylate plastic
CA cellulose acetate
CAB cellulose acetate butyrate
CAP cellulose acetate propionate
CEF cellulose formaldehyde
CF cresol-formaldehyde resin
CMC carboxymethyl cellulose
CN cellulose nitrate
COC cycloolefin copolymer
CP cellulose propionate
CTA cellulose triacetate
EAA ethylene-(acrylic acid) plastic
EBAK ethylene-(butyl acrylate) plastic; preferred term for EBA
EC ethyl cellulose
EEAK ethylene-(ethyl acrylate) plastic; preferred term for EEA
EMA ethylene-(methacrylic acid) plastic
EP epoxide; epoxy resin
E/P ethylene-propylene plastic; preferred term for EPM
2 © ISO 2011 – All rights reserved
---------------------- Page: 12 ----------------------
SIST EN ISO 1043-1:2012
ISO 1043-1:2011(E)
ETFE ethylene-tetrafluoroethylene plastic
1)
EVAC ethylene-(vinyl acetate) plastic; preferred term for EVA
EVOH ethylene-(vinyl alcohol) plastic
FEP perfluoro(ethylene-propylene) plastic; preferred term for PFEP
FF furan-formaldehyde resin
HBV poly(3-hydroxybutyrate)-co-(3-hydroxyvalerate)
LCP liquid-crystal polymer
MABS (methyl methacrylate)-acrylonitrile-butadiene-styrene plastic
MBS (methyl methacrylate)-butadiene-styrene plastic
MC methyl cellulose
MF melamine-formaldehyde resin
MP melamine-phenol resin
MSAN -methylstyrene-acrylonitrile plastic
PA polyamide
PAA poly(acrylic acid)
PAEK polyaryletherketone
PAI polyamidimide
PAK polyacrylate
PAN polyacrylonitrile
PAR polyarylate
PARA polyarylamide
PB polybutene
PBAK poly(butyl acrylate)
PBD 1,2-polybutadiene
PBN poly(butylene naphthalate)
PBS poly(butylene succinate)
PBSA poly(butylene succinate adipate)
PBT poly(butylene terephthalate)
PC polycarbonate
PCCE poly(cyclohexylene dimethylene cyclohexanedicarboxylate)
PCO polycycloolefin
PCL polycaprolactone
PCT poly(cyclohexylene dimethylene terephthalate)
PCTFE polychlorotrifluoroethylene
PDAP poly(diallyl phthalate)
PDCPD polydicyclopentadiene
PE polyethylene
2)
PE-C polyethylene, chlorinated; preferred term for CPE
PE-HD polyethylene, high density; preferred term for HDPE
PE-LD polyethylene, low density; preferred term for LDPE
PE-LLD polyethylene, linear low density; preferred term for LLDPE
PE-MD polyethylene, medium density; preferred term for MDPE
PE-UHMW polyethylene, ultra high molecular weight; preferred term for UHMWPE
PE-VLD polyethylene, very low density; preferred term for VLDPE
PEC polyestercarbonate
PEEK polyetheretherketone
PEEST polyetherester
1) In ISO 1629, the abbreviated term for ethylene-(vinyl acetate) copolymer is EVM.
2) In ISO 1629, the abbreviated term for chlorinated polyethylene is CM.
© ISO 2011 – All rights reserved 3
---------------------- Page: 13 ----------------------
SIST EN ISO 1043-1:2012
ISO 1043-1:2011(E)
PEI polyetherimide
PEK polyetherketone
PEN poly(ethylene naphthalate)
PEOX poly(ethylene oxide)
P
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.