iTeh Standards logo
EURUSD
Your shopping cart is empty.
SIST

SIST EN 565:2017

(Main)

Mountaineering equipment - Tape - Safety requirements and test methods

Mountaineering equipment - Tape - Safety requirements and test methods

This European Standard specifies safety requirements and test methods for tape supplied on drums or in separate lengths, for use in mountaineering including climbing.

Bergsteigerausrüstung - Band - Sicherheitstechnische Anforderungen und Prüfverfahren

Equipement d'alpinisme et d'escalade - Sangle - Exigences de sécurité et méthodes d'essai

La présente Norme européenne spécifie les exigences de sécurité et les méthodes d'essai relatives aux sangles fournies sur tambours ou en longueurs séparées, utilisées en alpinisme et en escalade.

Gorniška oprema - Trak - Varnostne zahteve in preskusne metode

Ta evropski standard določa varnostne zahteve in preskusne metode za trak, ki je dobavljen na bobnu ali v posameznih dolžinah, za uporabo v gorništvu, vključno s plezanjem.

General Information

Status
Published
Public Enquiry End Date
30-Dec-2014
Publication Date
11-Sep-2017
ICS
97.220.40 - Outdoor and water sports equipment
Technical Committee
SPO - Sports
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
24-Aug-2017
Due Date
29-Oct-2017
Completion Date
12-Sep-2017
Directive
2016/425 - Regulation (EU) 2016/425 of the European Parliament and of the Council of 9 March 2016 on personal protective equipment and repealing Council Directive 89/686/EEC
89/686/EEC - Council Directive 89/686/EEC of 21 December 1989 on the approximation of the laws of the Member States relating to personal protective equipment
Mandate
M/031 - Standardization mandate to CEN/CENELEC concerning standards for Personal Protective Equipment
Ref Project
EN 565:2017 - Mountaineering equipment - Tape - Safety requirements and test methods

Relations

Replaces
SIST EN 565:2007 - Mountaineering equipment - Tape - Safety requirements and test methods
Effective Date
01-Oct-2017
SIST EN 565:2017SIST EN 565:2017
PreviousNext
Standard
SIST EN 565:2017
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Gorniška oprema - Trak - Varnostne zahteve in preskusne metodeBergsteigerausrüstung - Band - Sicherheitstechnische Anforderungen und PrüfverfahrenEquipement d'alpinisme et d'escalade - Sangle - Exigences de sécurité et méthodes d'essaiMountaineering equipment - Tape - Safety requirements and test methods97.220.40Oprema za športe na prostem in vodne športeOutdoor and water sports equipmentICS:Ta slovenski standard je istoveten z:EN 565:2017SIST EN 565:2017en,fr,de01-oktober-2017SIST EN 565:2017SLOVENSKI
STANDARDSIST EN 565:20071DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 565
August
t r s y ICS
{ yä t t rä v r Supersedes EN
w x wã t r r xEnglish Version
Mountaineering equipment æ Tape æ Safety requirements and test methods Equipement d 5alpinisme et d 5escalade æ Sangle æ Exigences de sécurité et méthodes d 5essai
Bergsteigerausrüstung æ Band æ Sicherheitstechnische Anforderungen und Prüfverfahren This European Standard was approved by CEN on
t s May
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
w x wã t r s y ESIST EN 565:2017

Standards on mountaineering equipment . 9 Table A.1 — List of standards on mountaineering equipment . 9 Annex ZA (informative)
Relationship between this European Standard and the essential requirements of Directive 89/686/EEC aimed to be covered . 10 Table ZA.1 — Correspondence between this European Standard and Article(s) of Directive 89/686/EEC . 10
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

This May Also Interest You

SIST
SIST EN 17961:2025(Main)
Mountaineering equipment - Load sharing devices - Safety requirements and test methods
EN 17961:2025

This document specifies safety requirements and test methods for all types of load sharing devices commonly used in mountaineering (climbing and associated activities).
This document does not cover the specific requirements of devices intended for use in slackline applications.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 25649-5:2025(Main)
Floating leisure articles for use on and in the water - Part 5: Additional specific safety requirements and test methods for Class C devices (ISO 25649-5:2024)
EN ISO 25649-5:2024

This document specifies additional specific safety requirements and test methods for Class C floating leisure articles for use on and in the water regardless whether the buoyancy is achieved by inflation or inherent buoyant material.
This document is applicable for Class C floating leisure articles as specified in ISO 25649-1:2024, Table 1.
NOTE 1        Typical products forming Class C (see Annex B):
—      tube riders towable with interior holding facility and closed cockpit;
—      raft riders towable;
—      board riders towable;
—      banana type towable.
NOTE 2        Typical places for application:
—      distant from bathing areas and other frequented water surfaces, wide empty spaces, dedicated racetracks (parcours);
—      no to little waves;
—      no strong currents.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 25649-1:2025(Main)
Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods (ISO 25649-1:2024)
EN ISO 25649-1:2024

This document specifies general safety requirements and test methods related to materials, safety and performance for classified floating leisure articles for use on and in water.
This document is not applicable to:
—     aquatic toys (use in shallow waters/use under supervision);
—     inflatable boats with a buoyancy > 1 800 N;
—     buoyant aids for swimming instructions;
—     air mattresses that are not specifically designed or intended for use on the water (e.g. velour bed, self-inflating mattress and rubberized cotton air mattress);
—     floating seats for angling purposes;
—     surf sports type devices (e.g. body boards, surf boards, stand-up-paddles boards);
—     water ski, wakeboard or kite surfing board;
—     devices made from rigid materials e.g. wood, aluminium, hard or non-deformable plastic;
—     devices that are kept in shape by permanent air flow;
—     rings intended for use on water slides;
—     wading devices.

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 25649-6:2025(Main)
Floating leisure articles for use on and in the water - Part 6: Additional specific safety requirements and test methods for Class D devices (ISO 25649-6:2024)
EN ISO 25649-6:2024

This document specifies safety requirements and test methods related to materials, safety, performance and consumer information for classified floating leisure articles for use on and in the water according to ISO 25649-1:2024.
This document is applicable to Class D floating leisure articles for use on and in water according to ISO 25649-1:2024 regardless whether the buoyancy is achieved by inflation or inherent buoyant material.
NOTE 1        Typical products forming Class D (see Figure A.1 and Figure A.2):
—      inflatable climbing structures on the water;
—      bouncing platforms;
—      inflatable slides;
—      water trampolines;
—      teeter totters;
—      obstacle courses.
NOTE 2        Typical places for application:
—      pools;
—      lakes, ponds;
—      open sea;
—      sea shore (no offshore winds, no currents).

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 25649-2:2025(Main)
Floating leisure articles for use on and in the water - Part 2: Consumer information (ISO 25649-2:2024)
EN ISO 25649-2:2024

This document specifies consumer information for classified floating leisure articles for use on and in water according to ISO 25649-1:2024.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 25649-3:2025(Main)
Floating leisure articles for use on and in the water - Part 3: Additional specific safety requirements and test methods for Class A devices (ISO 25649-3:2024)
EN ISO 25649-3:2024

This document specifies additional specific safety requirements and test methods for Class A floating leisure articles for use on and in the water regardless whether the buoyancy is achieved by inflation or inherent buoyant material.
This document is applicable for Class A floating leisure articles as specified in ISO 25649-1:2024, Table 1.
NOTE 1        Typical products in Class A (see Figures A.1 to A.3):
—      “Floating Islands” in near round or square shaped forms decorated with palm tree, sun shade, etc. high superstructure;
—      large floats/rafts in various shapes, from round to square;
—      large floating tubes, giant tubes (inflatable or inherently buoyant);
—      floating arm chairs, seats and sun beds;
—      air mattresses for use on the water;
—      recreational rafts/floating platforms/pontoons.
NOTE 2        Typical places for application:
—      pools;
—      protected areas of lakes, ponds;
—      protected area sea shore (no offshore winds, no currents).

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 25649-7:2025(Main)
Floating leisure articles for use on and in the water - Part 7: Additional specific safety requirements and test methods for Class E devices (ISO 25649-7:2024)
EN ISO 25649-7:2024

This document specifies additional specific safety requirements and test methods for Class E floating leisure articles for use on and in the water regardless whether the buoyancy is achieved by inflation or inherent buoyant material.
This document is applicable for Class E floating leisure articles as specified in ISO 25649-1:2024, Table 1.
Class E devices are inflatable boats of a buoyancy of less than 1 800 N with a hull length of more than 1,2 m and less than 2,5 m.
Class E devices are intended for use in bathing areas or in protected and safe shore zones.
NOTE 1        Typical products forming Class E (see Annex F):
—      inflatable boats for rowing or paddling of near oval shape with or without transom;
—      canoes and kayaks;
—      inflatable boats made from plastic sheets or from reinforced materials;
—      motor kit/sail kit as additional option.
NOTE 2        Typical applications of Class E devices:
—      moving from one place to another for pleasure purposes;
—      staying on the water for relaxing;
—      moving from shore to the main boat, transportation of persons and load (tender boat).

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 25649-4:2025(Main)
Floating leisure articles for use on and in the water - Part 4: Additional specific safety requirements and test methods for Class B devices (ISO 25649-4:2024)
EN ISO 25649-4:2024

This document specifies additional specific safety requirements and test methods for Class B floating leisure articles for use on and in the water regardless whether the buoyancy is achieved by inflation or inherent buoyant material.
This document is applicable for Class B floating leisure articles as specified in ISO 25649-1:2024, Table 1.
Class B devices provide a buoyant structure with one or more body openings into which the user is positioned partly immersed.
NOTE 1        Typical products in Class B (see Annex B):
—      floating rafts with interior body holding system (“swim seats”) mostly in circular or square shape, fantasy shape for playing purposes;
—      floating fantasy shaped structures with one or more openings to host a child’s body, with or without body holding system;
—      floating with slits or openings to put legs through any shape;
—      floating rings with interior seat segments inside the circular body opening.
NOTE 2        Typical places for application:
—      pools;
—      protected areas of lakes, ponds;
—      protected areas of sea shore (no offshore winds, no currents).

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17109:2020+A1:2024(Main + Amendment)
Mountaineering equipment - Individual safety systems for rope courses - Safety requirements and test methods
EN 17109:2020+A1:2024

This document specifies safety requirements and test methods for components of an individual safety system for protection against a fall from height used in permanent and mobile rope courses as defined in EN 15567-1:2015+A1:2020.
The products considered in this document are not intended to limit, by themselves, the deceleration of the fall of the user, as defined in EN 15567-1:2015+A1:2020. For this requirement, it is essential to consider the whole ropes course system.
Safety lines and harnesses are not covered in this document.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 958:2024(Main)
Mountaineering equipment - Energy absorbing systems for use in klettersteig (via ferrata) climbing - Safety requirements and test methods
EN 958:2024

This document specifies safety requirements and test methods for energy absorbing systems (EAS) for use on suitable via ferrata (e.g. EN 16869:2017), for users weighing not less than 40 kg (total weight without equipment) and no more than 120 kg (total weight including the equipment).
NOTE   This document is one of a package of standards for mountaineering equipment, see Annex A.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day