iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

oSIST prEN ISO 18984:2024

(Main)

Ball valves for thermoplastics piping systems for hot and cold water installations under pressure - Types, dimensions and requirements (ISO/DIS 18984:2024)

Ball valves for thermoplastics piping systems for hot and cold water installations under pressure - Types, dimensions and requirements (ISO/DIS 18984:2024)

This document is applicable to 2-way or multi-way ball valve manufactured with thermoplastic materials to be used for the transport of pressurized water whether or not intended for human consumption (domestic systems) for applications in buildings and utility branches.
              NOTE The two-way valve is generally used for sectioning and control, the multi-way one to divert or mix the flows; information on their functionality can be       
                 found in Appendix B information of ISO 16135.
The application classes are indicated in the relevant hot and cold water system standards.
This document defines the dimensions necessary for the assembly of the valves, ensuring its
interchangeability and defines its physical and mechanical requirements.

Kugelventile für thermoplastische Heiß- und Kaltwasserdruckrohrleitungen - Arten, Abmessungen und Anforderungen (ISO/DIS 18984:2024)

Robinets à tournant sphérique pour systèmes de canalisations en matières thermoplastiques pour installations d'eau chaude et froide sous pression - Types, dimensions et exigences (ISO/DIS 18984:2024)

Kroglični ventili za cevne sisteme iz termoplastov za napeljave tople in hladne vode pod tlakom - Vrste, mere in zahteve (ISO/DIS 18984:2024)

General Information

Status
Not Published
Public Enquiry End Date
23-Apr-2024
ICS
23.060.20 - Ball and plug valves
Technical Committee
PCV - Plastic pipes, fittings and valves
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
26-Feb-2024
Due Date
15-Jul-2024
Ref Project
prEN ISO 18984 - Ball valves for thermoplastics piping systems for hot and cold water installations under pressure - Types, dimensions and requirements (ISO/DIS 18984:2024)

Buy Standard

prEN ISO 18984:2024prEN ISO 18984:2024
PreviousNext
Draft
prEN ISO 18984:2024
English language
23 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 18984:2024
01-april-2024
Kroglični ventili za cevne sisteme iz termoplastov za napeljave tople in hladne
vode pod tlakom - Vrste, mere in zahteve (ISO/DIS 18984:2024)
Ball valves for thermoplastics piping systems for hot and cold water installations under
pressure - Types, dimensions and requirements (ISO/DIS 18984:2024)
Kugelventile für thermoplastische Heiß- und Kaltwasserdruckrohrleitungen - Arten,
Abmessungen und Anforderungen (ISO/DIS 18984:2024)
Robinets à tournant sphérique pour systèmes de canalisations en matières
thermoplastiques pour installations d'eau chaude et froide sous pression - Types,
dimensions et exigences (ISO/DIS 18984:2024)
Ta slovenski standard je istoveten z: prEN ISO 18984
ICS:
23.060.20 Zapirni ventili (kroglasti in Ball and plug valves
pipe)
oSIST prEN ISO 18984:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 18984:2024

---------------------- Page: 2 ----------------------
oSIST prEN ISO 18984:2024
DRAFT INTERNATIONAL STANDARD
ISO/DIS 18984
ISO/TC 138/SC 7 Secretariat: UNI
Voting begins on: Voting terminates on:
2024-01-31 2024-04-24
Ball valves for thermoplastics piping systems for hot
and cold water installations under pressure — Types,
dimensions and requirements
Robinets à tournant sphérique pour systèmes de tuyauterie en materiaux thermoplastiques pour
installations d'eau chaude et froide sous pression — Types, dimensions et exigences
ICS: 23.060.20
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 18984:2024(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2024

---------------------- Page: 3 ----------------------
oSIST prEN ISO 18984:2024
ISO/DIS 18984:2024(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 18984
ISO/TC 138/SC 7 Secretariat: UNI
Voting begins on: Voting terminates on:

Ball valves for thermoplastics piping systems for hot
and cold water installations under pressure — Types,
dimensions and requirements
Robinets à tournant sphérique pour systèmes de tuyauterie en materiaux thermoplastiques pour
installations d'eau chaude et froide sous pression — Types, dimensions et exigences
ICS: 23.060.20
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2024
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 18984:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2024 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 4 ----------------------
oSIST prEN ISO 18984:2024
ISO/DIS 18984:2023(E)
Contents Page
Foreword .iv
Introduction .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 15714-3:2023(Main)
Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements
EN 15714-3:2022

This document provides basic requirements for pneumatic part-turn valve actuators, both double acting and
single acting, used for on-off and modulating control duties. It includes guidelines, recommendations and
methods for enclosure and corrosion protection, control and testing.
It does not apply to pneumatic actuators which are integral parts of control valves.
Other requirements, or conditions of use, different from those indicated in this document, shall be subject to
negotiations, between the purchaser and the manufacturer/supplier, prior to order.
The terms and definitions applicable to this European Standard are given in FprEN 15714-1.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15714-6:2022(Main)
Industrial valves - Actuators - Part 6: Hydraulic linear actuators for industrial valves - Basic requirements
EN 15714-6:2022

This document provides basic requirements for piston type hydraulic linear actuators for industrial valve, both double acting and single acting, used for on-off and modulating control duties.
It includes criteria, method and guidelines for design, qualification, corrosion protection, control and testing.
It does not apply to hydraulic actuators which are integral parts of control valves.
Other requirements, or conditions of use, different from those indicated in this document, should be subject to negotiations, between the purchaser and the Manufacturer/supplier, prior to order.
The terms and definitions given in EN 15714-1 are used in this European Standard as applicable.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15714-5:2022(Main)
Industrial valves - Actuators - Part 5: Pneumatic linear actuators for industrial valves - Basic requirements
EN 15714-5:2022

This document provides basic requirements for piston type pneumatic linear actuators for industrial valve, both double acting and single acting, used for on-off and modulating control duties.
It includes criteria, method and guidelines for design, qualification, corrosion protection, control and testing.
It does not apply to diaphragm actuators and to pneumatic actuators which are integral parts of control valves.
Other requirements, or conditions of use, different from those indicated in this document, are subject to negotiations, between the purchaser and the manufacturer/supplier, prior to order.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 23826:2022(Main)
Gas cylinders - Ball valves - Specification and testing (ISO 23826:2021)
EN ISO 23826:2021

This document specifies design, type testing, marking and manufacturing test and examination
requirements for ball valves used as:
a) closures of refillable transportable gas cylinders, pressure drums and tubes;
b) main valves for cylinder bundles;
c) valves for cargo transport units (e.g. trailers, battery vehicles and MEGCs);
which convey compressed gases, liquefied gases and dissolved gases.
NOTE 1 In the course of the document, the term "valve" is used with the meaning of "ball valve".
This document does not apply to:
•   oxidizing gases as defined in ISO 10156,
•   toxic gases (i.e. gases listed in ISO 10298 having an LC50 value ≤ 5 000 ppm) and
•   acetylene for single gas cylinders, pressure drums and tubes.
NOTE 2 The reason for the exclusion of oxidizing gases is that the use of ball valves as closures of high
pressure cylinders for oxidizing gases is known to lead to specific ignition hazards that cannot reasonably be mitigated through the ball valve design or type testing. Safety hazards concern both the ball valve itself and any downstream equipment.
This International document does not apply to ball valves for liquefied petroleum gas (LPG),
cryogenic equipment, portable fire extinguishers and cylinders for breathing apparatus.
NOTE 3 Requirements for valves for cryogenic vessels are specified in ISO 21011 and at a regional level, e.g. in EN 1626. Requirements for valves for portable fire extinguishers at a regional level are specified e.g. in EN 3 series.
NOTE 4 Certain specific requirements for valves for breathing apparatus in addition to those that are
given in this document are specified at a regional level, e.g. in EN 144 series. Certain specific requirements for quick-release valves for fixed fire-fighting systems in addition to those that are given in this document are specified in ISO 16003 and at a regional level e.g. in EN 12094–4.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 21922:2022(Main)
Refrigerating systems and heat pumps - Valves - Requirements, testing and marking (ISO 21922:2021)
EN ISO 21922:2021

This European Standard specifies safety requirements, safety factors, test methods, test pressures used and marking of refrigerating valves and other components with similar bodies, hereinafter called valves, for use in refrigerating systems.
It describes the procedure to be followed when designing (by calculation or by an experimental design method) valve parts subjected to pressure as well as the criteria to be used in the selection of materials.
The standard describes methods by which reduced impact values at low temperatures may be taken into account in a safe manner.
This standard applies to the design of bodies and bonnets for pressure relief devices, including bursting disc devices, with respect to pressure containment but it does not apply to any other aspects of the design or application of pressure relief devices.

  • Standard
    100 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    96 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 16135:2006/A1:2019(Amendment)
Industrial valves - Ball valves of thermoplastics materials - Amendment 1 (ISO 16135:2006/Amd 1:2019)
EN ISO 16135:2006/A1:2019
  • Amendment
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 331:2016(Main)
Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings
EN 331:2015

1.1 This European standard specifies the general requirements for the construction, performance and safety of ball valves and closed bottom taper plug valves. It also details the test methods and marking requirements.
It applies to metallic valves for domestic and commercial not directly buried installations inside or outside of buildings, using gases of the first, second and third family (specified in EN 437) and working up to
0,2 105 Pa, 0,5 105 Pa, 1 x 105Pa. 5 105 Pa and 20 x 105Pa.
NOTE   "Not directly buried" within the context of this standard means that valves below ground are not in direct contact with earth or other materials e.g. that they are in a protected encasement.
1.2 Valve nominal sizes (DN) covered by this European standard are as follows: 6, 8, 10, 12, 15, 20, 25, 32, 40, 50.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 17292:2016(Main)
Metal ball valves for petroleum, petrochemical and allied industries (ISO 17292:2015)
EN ISO 17292:2015

ISO 17292:2004 specifies the requirements for a series of metal ball valves suitable for petroleum, petrochemical, natural gas plants, and related industrial applications. It covers valves of the nominal sizes DN 8, 10, 15, 20, 25, 32, 40, 50, 65, 80, 100, 150, 200, 250, 300, 350, 400, 450 and 500, corresponding to nominal pipe sizes NPS 1/4, 3/8, 1/2, 3/4, 1, 1 1/4, 1 1/2, 2, 2 1/2, 3, 4, 6, 8, 10, 12, 14, 16, 18 and 20, and is applicable for pressure designations of Class 150, 300, 600 and 800 (the last applicable only for valves with reduced bore and with threaded and socket welding end), and PN 16, 25 and 40.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1983:2014(Main)
Industrial valves - Steel ball valves
EN 1983:2013

This European Standard specifies requirements for industrial steel ball valves having flanged, threaded, socket welding or butt welding ends. The DN range is:
- DN 4 ; DN 6 ; DN 8 ; DN 10 ; DN 15 ; DN 20 ; DN 25 ; DN 32 ; DN 40 ; DN 50 ; DN 65 ; DN 80 ; DN 100 ; DN 125 ; DN 150 ; DN 200 ; DN 250 ; DN 300 ; DN 350 ; DN 400 ; DN 450 ; DN 500 ; DN 550 ; DN 600 ; DN 650 ; DN 700 ; DN 750 ; DN 800 ; DN 850 ; DN 900.
The PN and Class ranges are:
- PN 6 ; PN 10 ; PN 16 ; PN 25 ; PN 40 ; PN 63 ; PN 100 ;
- Class 150 ; Class 300 ; Class 600 ; Class 900 ; Class 1 500 ; Class 2 500 ; Class 4 500.
This European Standard applies to steel ball valves mainly used for industrial and general purpose applications. However, they can be used for other applications provided the requirements of the relevant performance standard are met.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13547:2014(Main)
Industrial valves - Copper alloy ball valves
EN 13547:2013

This European Standard applies to copper alloy ball valves for general use having, flanged, threaded, capillary or compression or loose nut/union body ends. This European Standard does not apply to copper alloy ball valves for drinking water applications. This European Standard specifies the design and performance requirements including materials, pressure/temperature ratings for the shell and body seats, dimensions, test procedures and marking. For some specific fields of application, for example gas, valves to this European Standard can be used provided the requirements of the relevant performance standards are met. Approval by the relevant regulatory body may be required. The range of nominal sizes is DN 6 to DN 300 and of nominal diameters 6 mm to 110 mm The range of pressure designations covered is PN 6 ; PN 10 ; PN 16 ; PN 20 ; PN 25 ; PN 32 ; PN 40 ; PN 63 ; Class 150 and Class 300. For the applicability of each nominal size/diameter and each pressure designation to the different types of valve end.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day