SIST EN 10305-5:2016

Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes

This European Standard specifies the technical delivery conditions for welded cold sized steel tubes of square and rectangular cross section for precision applications.
Tubes according to this document are characterized by having precisely defined tolerances on dimension and a specified maximum surface roughness. Typical fields of application are in the automotive, furniture and general engineering industries.

Präzisionsstahlrohre - Technische Lieferbedingungen - Teil 5: Geschweißte maßumgeformte Rohre mit quadratischem und rechteckigem Querschnitt

Diese Europäische Norm legt die technischen Lieferbedingungen für geschweißte maßumgeformte Präzisionsstahlrohre mit quadratischem und rechteckigem Querschnitt fest.
Rohre nach diesem Dokument sind durch genau definierte Grenzabmaße und eine festgelegte Oberflächen-rauheit charakterisiert. Typische Anwendungsgebiete sind der Fahrzeugbau, die Möbelindustrie und der Allgemeine Maschinenbau.

Tubes de précision en acier - Conditions techniques de livraison - Partie 5 : Tubes soudés calibrés avec section carrée et rectangulaire

Jeklene cevi za precizno uporabo - Tehnični dobavni pogoji - 5. del: Varjene in hladno dimenzionirane kvadratne in pravokotne cevi

Ta evropski standard določa tehnične dobavne pogoje za varjene in hladno dimenzionirane cevi s kvadratnim in pravokotnim prečnim prerezom za precizno uporabo.
Cevi v skladu s tem dokumentom imajo natančno opredeljene tolerance za mere in določeno največjo površinsko hrapavost. Tipična področja uporabe so v avtomobilski in pohištveni industriji ter v splošnem inženirstvu.

General Information

• Status: Withdrawn
• Public Enquiry End Date: 09-Nov-2015
• Publication Date: 22-Aug-2016
• Withdrawal Date: 07-Jan-2024
• ICS: 77.140.75 - Steel pipes and tubes for specific use
• Technical Committee: IFEK - Ferrous metals
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 04-Jan-2024
• Due Date: 27-Jan-2024
• Completion Date: 08-Jan-2024
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/131 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on pipes, tanks and ancillaries, not in contact with water intended for human consumption
• Ref Project: EN 10305-5:2016 - Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes

Relations

• Replaces: SIST EN 10305-5:2010 - Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded and cold sized square and rectangular tubes
• Effective Date: 06-Apr-2016
• Revises: SIST EN 10305-3:2024 - Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes
• Effective Date: 19-Jan-2023
• Revised: SIST EN 10305-5:2010 - Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded and cold sized square and rectangular tubes
• Effective Date: 01-Oct-2015

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Präzisionsstahlrohre - Technische Lieferbedingungen - Teil 5: Geschweißte maßumgeformte Rohre mit quadratischem und rechteckigem QuerschnittTubes de précision en acier - Conditions techniques de livraison - Partie 5 : Tubes soudés calibrés avec section carrée et rectangulaireSteel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes77.140.75Jeklene cevi in cevni profili za posebne nameneSteel pipes and tubes for specific useICS:Ta slovenski standard je istoveten z:EN 10305-5:2016SIST EN 10305-5:2016en,fr,de01-oktober-2016SIST EN 10305-5:2016SLOVENSKI
STANDARDSIST EN 10305-5:20101DGRPHãþD



SIST EN 10305-5:2016



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 10305-5
March
t r s x ICS
y yä s v rä y w Supersedes EN
s r u r wæ wã t r s rEnglish Version
Steel tubes for precision applications æ Technical delivery conditions æ Part
wã Welded cold sized square and rectangular tubes Tubes de prßcision en acier æ Conditions techniques de livraison æ Partie
w ã Tubes soudßs calibrßs avec section carrße et rectangulaire
Präzisionsstahlrohre æ Technische Lieferbedingungen æTeil
wã Geschweißte maßumgeformte Rohre mit quadratischem und rechteckigem Querschnitt This European Standard was approved by CEN on
s z January
t r s xä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey andUnited Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
9
t r s x CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s r u r wæ wã t r s x ESIST EN 10305-5:2016



EN 10305-5:2016 (E) 2 Contents Page European foreword . 4 1 Scope . 5 2 Normative references . 5 3 Terms and definitions . 6 4 Symbols . 6 5 Classification and designation . 6 5.1 Classification . 6 5.2 Designation. 6 6 Information to be supplied by the purchaser . 7 6.1 Mandatory information . 7 6.2 Options . 7 6.3 Example of an order . 8 7 Manufacturing process . 8 7.1 Steelmaking process . 8 7.2 Tube manufacture and delivery conditions .
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Präzisionsstahlrohre - Technische Lieferbedingungen - Teil 5: Geschweißte maßumgeformte Rohre mit quadratischem und rechteckigem QuerschnittTubes de précision en acier - Conditions techniques de livraison - Partie 5 : Tubes soudés calibrés avec section carrée et rectangulaireSteel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes77.140.75Jeklene cevi in cevni profili za posebne nameneSteel pipes and tubes for specific useICS:Ta slovenski standard je istoveten z:FprEN 10305-5 revkSIST FprEN 10305-5:2015en,fr,de01-oktober-2015kSIST FprEN 10305-5:2015SLOVENSKI
STANDARD



kSIST FprEN 10305-5:2015



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
FprEN 10305-5
July 2015 ICS 77.140.75 Will supersede EN 10305-5:2010English Version
Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes
Tubes de précision en acier - Conditions techniques de livraison - Partie 5 : Tubes soudés calibrés avec section carrée et rectangulaire
Präzisionsstahlrohre - Technische Lieferbedingungen - Teil 5: Geschweißte maßumgeformte Rohre mit quadratischem und rechteckigem Querschnitt This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee ECISS/TC 110.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. FprEN 10305-5:2015 EkSIST FprEN 10305-5:2015



FprEN 10305-5:2015 (E) 2 Contents Page Foreword .4 1 Scope .5 2 Normative references .5 3 Terms and definitions .6 4 Symbols .6 5 Classification and designation .6 5.1 Classification .6 5.2 Designation .6 6 Information to be supplied by the purchaser .7 6.1 Mandatory information .7 6.2 Options .7 6.3 Example of an order .
...