SIST EN 10305-3:2024
(Main)Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes
Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes
This document specifies the technical delivery conditions for welded cold sized steel tubes of circular cross section with specified outside diameter D ≤ 193,7 mm and of square and of rectangular cross section for precision applications. This document may also be applied to welded cold sized tube with other cross section shapes. Tubes according to this document are characterized by having precisely defined tolerances on dimensions and a specified maximum surface roughness. Typical fields of application are in the automotive, furniture and general engineering industries.
Präzisionsstahlrohre - Technische Lieferbedingungen - Teil 3: Geschweißte maßgewalzte Rohre
Dieses Dokument legt die Technischen Lieferbedingungen für geschweißte, maßgewalzte Präzisionsstahlrohre mit einem kreisförmigen Querschnitt bei einem Nenndurchmesser D ≤ 193,7 mm und mit quadratischem und rechteckigem Querschnitt fest.
Dieses Dokument kann auch auf geschweißte maßgewalzte Rohre mit einem anderen Querschnitt angewendet werden.
Rohre nach diesem Dokument sind durch genau definierte Grenzabmaße und eine festgelegte maxi¬male Oberflächenrauheit charakterisiert. Typische Anwendungsgebiete sind der Fahrzeugbau, die Möbel-industrie und der Maschinenbau allgemein.
Tubes de précision en acier - Conditions techniques de livraison - Partie 3 : Tubes soudés calibrés à froid
Le présent document spécifie les conditions techniques de livraison des tubes en acier soudés calibrés à froid, de section circulaire, avec un diamètre extérieur spécifié D ≤ 193,7 mm et de section carrée et de section rectangulaire pour des applications de précision.
Le présent document peut également s'appliquer aux tubes soudés calibrés à froid ayant d'autres formes de section transversale.
Les tubes conformes au présent document se caractérisent par des tolérances dimensionnelles précises et par une rugosité maximale spécifiée. Les domaines typiques d'application se situent dans le secteur automobile, l'ameublement et l'ingénierie générale.
Jeklene cevi za precizno uporabo - Tehnični dobavni pogoji - 3. del: Varjene hladno oblikovane cevi
Ta dokument določa tehnične dobavne pogoje za varjene in hladno dimenzionirane cevi s krožnim prečnim prerezom z določenim zunanjim premerom D ≤ 193,7 mm in kvadratnim in pravokotnim prečnim prerezom za precizno uporabo. Ta dokument se lahko uporablja tudi za varjene in hladno dimenzionirane cevi z drugimi oblikami prečnih prerezov. Cevi v skladu s tem dokumentom imajo natančno opredeljene tolerance za mere in določeno največjo površinsko hrapavost. Tipična področja uporabe so v avtomobilski in pohištveni industriji ter v splošnem inženirstvu.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 10305-3:2024
01-februar-2024
Jeklene cevi za precizno uporabo - Tehnični dobavni pogoji - 3. del: Varjene
hladno oblikovane cevi
Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded
cold sized tubes
Präzisionsstahlrohre - Technische Lieferbedingungen - Teil 3: Geschweißte
maßgewalzte Rohre
Tubes de précision en acier - Conditions techniques de livraison - Partie 3 : Tubes
soudés calibrés à froid
Ta slovenski standard je istoveten z: EN 10305-3:2023
ICS:
77.140.75 Jeklene cevi in cevni profili Steel pipes and tubes for
za posebne namene specific use
SIST EN 10305-3:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 10305-3:2024
---------------------- Page: 2 ----------------------
SIST EN 10305-3:2024
EN 10305-3
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2023
EUROPÄISCHE NORM
ICS 77.140.75 Supersedes EN 10305-3:2016, EN 10305-5:2016
English Version
Steel tubes for precision applications - Technical delivery
conditions - Part 3: Welded cold sized tubes
Tubes de précision en acier - Conditions techniques de Präzisionsstahlrohre - Technische Lieferbedingungen -
livraison - Partie 3 : Tubes soudés calibrés à froid Teil 3: Geschweißte maßgewalzte Rohre
This European Standard was approved by CEN on 8 October 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 10305-3:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 10305-3:2024
EN 10305-3:2023 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Symbols. 8
5 Classification and designation . 8
5.1 Classification . 8
5.2 Designation . 8
6 Information to be supplied by the purchaser . 9
6.1 Mandatory information . 9
6.2 Options . 9
6.3 Examples of orde
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.