oSIST prEN ISO 2884-2:2023
(Main)Paints and varnishes - Determination of viscosity using rotational viscometers - Part 2: Relative measurement of viscosity using disc or ball spindles at specified speeds (ISO/DIS 2884-2:2023)
Paints and varnishes - Determination of viscosity using rotational viscometers - Part 2: Relative measurement of viscosity using disc or ball spindles at specified speeds (ISO/DIS 2884-2:2023)
ISO 2884-2:2003 specifies a general procedure for determining the viscosity of paints, varnishes and related products with a viscosity of up to 34 pascal seconds. It is applicable mainly during production and thinning.
Beschichtungsstoffe - Bestimmung der Viskosität mit Rotationsviskosimetern - Teil 2: Relative Viskositätsmessung mit Scheiben- oder Kugelspindeln bei festgelegten Drehzahlen (ISO/DIS 2884-2:2023) 2884-
Peintures et vernis - Détermination de la viscosité au moyen de viscosimètres rotatifs - Partie 2: Mesurage relatif de la viscosité avec des agitateurs à disque ou à bille à des vitesses spécifiées (ISO/DIS 2884-2:2023)
L'ISO 2884-2:2003 spécifie un mode opératoire général à suivre pour déterminer la viscosité des peintures, des vernis et des produits assimilés dans une gamme de viscosités allant jusqu'à 34 pascals seconde. Elle s'applique essentiellement à la production et à la dilution.
Barve in laki - Določanje viskoznosti z rotacijskimi viskozimetri - 2. del: Merjenje relativne vrednosti viskoznosti z diskom ali kroglico prri določeni hitrosti (ISO/DIS 2884-2:2023)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN ISO 2884-2:2023
01-november-2023
[Not translated]
Paints and varnishes - Determination of viscosity using rotational viscometers - Part 2:
Relative measurement of viscosity using disc or ball spindles at specified speeds
(ISO/DIS 2884-2:2023)
Beschichtungsstoffe - Bestimmung der Viskosität mit Rotationsviskosimetern - Teil 2:
Relative Viskositätsmessung mit Scheiben- oder Kugelspindeln bei festgelegten
Drehzahlen (ISO/DIS 2884-2:2023)
Peintures et vernis - Détermination de la viscosité au moyen de viscosimètres rotatifs -
Partie 2: Mesurage relatif de la viscosité avec des agitateurs à disque ou à bille à des
vitesses spécifiées (ISO/DIS 2884-2:2023)
Ta slovenski standard je istoveten z: prEN ISO 2884-2
ICS:
87.040 Barve in laki Paints and varnishes
oSIST prEN ISO 2884-2:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 2884-2:2023
---------------------- Page: 2 ----------------------
oSIST prEN ISO 2884-2:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 2884-2
ISO/TC 35/SC 9 Secretariat: BSI
Voting begins on: Voting terminates on:
2023-09-04 2023-11-27
Paints and varnishes — Determination of viscosity using
rotational viscometers —
Part 2:
Relative measurement of viscosity using disc or ball
spindles at specified speeds
ICS: 87.040
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 2884-2:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
---------------------- Page: 3 ----------------------
oSIST prEN ISO 2884-2:2023
ISO/DIS 2884-2:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 2884-2
ISO/TC 35/SC 9 Secretariat: BSI
Voting begins on: Voting terminates on:
Paints and varnishes — Determination of viscosity using
rotational viscometers —
Part 2:
Relative measurement of viscosity using disc or ball
spindles at specified speeds
ICS: 87.040
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 2884-2:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
© ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
---------------------- Page: 4 ----------------------
oSIST prEN ISO 2884-2:2023
ISO/DIS 2884-2:2023(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitio
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.