Name: SIST DIN 14096-3:2002
Brand: SIST
SKU: bcc86735-9ead-4c44-8772-b387f13b2cef
Price: 44.3 USD
Availability: InStock
Rating: 5 (5 reviews)

Brandschutzordnung – Teil 3: Teil C (für Personen mit besonderen Brandschutzaufgaben) - Regeln für das Erstellen

Požarni red – 3. del: Del C (za osebe s posebnimi dolžnostmi s področja požarnega varstva) – Pravila za izdelavo

General Information

Status

Published

ICS

13.220.01 - Protection against fire in general

Technical Committee

POZ - Požarna varnost

Current Stage

7100 - Izvirni SIST - Priprava dokumenta (Local Project)

Start Date

01-Dec-2002

Due Date

01-Dec-2002

Completion Date

01-Dec-2002

Ref Project

Buy Standard

Standard + National Annex and/or Foreword

DIN 14096-3:2002

Foreword and/or annex in Slovenian language, body of the standard in German language

5 pages

sale 10% off

Preview

sale 10% off

Preview

e-Library read for

1 day

Standards Content (Sample)

DIN 14096-3:2002

SLOVENSKI SIST DIN 14096-3
druga izdaja
STANDARD
december 2002

Požarni red – 3. del: Del C (za osebe s posebnimi dolžnostmi s področja
požarnega varstva) – Pravila za izdelavo
(prevzet DIN 14096-3:2000 z metodo platnice)

Brandschutzordnung – Teil 3: Teil C (für Personen mit besonderen
Brandschutzaufgaben) – Regeln für das Erstellen

Fire precaution regulation – Part 3: Part C (for persons with special tasks of fire
prevention and fire fighting) – Rules for drafting

Règlement pour la lutte contre l'incendie – Partie 3: Partie C (pour personnes
avec tâches particulières de la protection contre l'incendie) – Règles pour la
réalisation

Deskriptorji: gradbeništvo, požarna zaščita, gasilstvo, požarni red, požarni načrt, načrt
evakuacije

Referenčna številka
ICS 13.220 SIST DIN 14096-3:2002 ((sl),de)

Nadaljevanje na straneh II in od 1 do 3

© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST 14096-3 : 2002
NACIONALNI UVOD
Standard
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST

SIST-TP CEN/TR 17524:2020(Main)

Fire safety engineering in Europe - Review of national requirements and application

CEN/TR 17524:2020

This document gives an overview of the evolution of regulations and application of Fire Safety Engineering (FSE) in Europe. Based on work performed in 2001-2002, a full update of information has been done. A global survey based on questionnaires defined in 2001, the evolution and possible perspectives of the FSE practices within two perimeters are presented:
- The first perimeter is the same perimeter analysed in 2001 corresponding to the European Union defined in 2001 extended to European countries with European Union agreement (Switzerland, Norwegian and Iceland).
- The second perimeter is the European Union perimeter of 2016 extended to European countries with European Union agreement (Switzerland, Norwegian and Iceland).
Conclusions and initiatives of the 2001 proposals were analysed 15 years after, with and without the extension of European Union. New initiatives have since been proposed.
In addition, the state-of-the-art of Fire Safety Engineering is updated.

Technical report
68 pages
English language
sale 10% off
e-Library read for
1 day
Draft
68 pages
English language
sale 10% off
e-Library read for
1 day

19-Jun-2020
07-Sep-2020
13.220.01
POZ

SIST

SIST ISO 19706:2018

Guidelines for assessing the fire threat to people

ISO 19706:2011

This International Standard is intended to serve as general guidelines for the assessment of the fire threat to
people. It encompasses the development, evaluation and use of relevant quantitative information for use in
fire hazard and risk assessment. This information, generally obtained from fire-incidence investigation, fire
statistics, real-scale fire tests and from physical fire models, is intended for use in conjunction with
computational models for analysis of the initiation and development of fire, fire spread, smoke formation and
movement, chemical species generation, transport and decay, and people movement, as well as fire detection
and suppression [ISO/TR 13387 (all parts)]. Aspects of the methodology described in this International
Standard are further amplified in ISO 13571 and ISO 13344.
This International Standard is intended to facilitate addressing the consequences of a single, acute human
exposure to fire effluent. This International Standard does not address other effects of the heat, gases and
aerosols, such as effects on electronic equipment and effects of frequent, multiple environmental exposures of
people, which are of importance in fire safety design.

Standard
12 pages
English language
sale 15% off
Standard
17 pages
English language
sale 10% off
e-Library read for
1 day
Standard
14 pages
French language
sale 15% off

29-Jul-2018
23-Aug-2018
13.220.01
POZ

SIST

SIST EN ISO 13943:2017(Main)

Fire safety - Vocabulary (ISO 13943:2017)

EN ISO 13943:2017

This document defines terminology relating to fire safety as used in ISO and IEC fire standards.

Standard
61 pages
English language
sale 10% off
e-Library read for
1 day
Draft
60 pages
English language
sale 10% off
e-Library read for
1 day

SIST

SIST EN 13381-4:2013(Main)

Test methods for determining the contribution to the fire resistance of structural members - Part 4: Applied passive protection to steel members

EN 13381-4:2013

This European Standard specifies a test method for determining the contribution made by applied passive fire protection systems to the fire resistance of structural steel members, which can be used as beams or columns. It considers only sections without openings in the web. It is not directly applicable to structural tension members without further evaluation. Results from analysis of I or H -sections are directly applicable to angles, channels and T-sections for the same section factor, whether used as individual elements or as bracing. This European Standard does not apply to solid bar or rod. This European standard covers fire protection systems that involve only passive materials and not to reactive fire protection materials as defined in this document. The evaluation is designed to cover a range of thicknesses of the applied fire protection material, a range of steel sections, characterized by their section factors, a range of design temperatures and a range of valid fire protection classification periods. This European standard contains the fire test procedures, which specifies the tests which should be carried out to determine the ability of the fire protection system to remain coherent and attached to the steelwork, and to provide data on the thermal characteristics of the fire protection system, when exposed to the standard temperature/time curve specified in EN 1363-1. The fire test methodology makes provision for the collection and presentation of data, which can be used as direct input to the calculation of fire resistance of steel structural members in accordance with the procedures given in EN 1993-1-2 and EN 1994-1-2. This European standard also contains the assessment, which prescribes how the analysis of the test data shall be made and gives guidance on the procedures by which interpolation should be undertaken. The assessment procedure is used to establish: a) on the basis of temperature data derived from testing loaded and unloaded sections, a correction factor and any practical constraints on the use of the fire protection system under fire test conditions, (the physical performance); b) on the basis of the temperature data derived from testing short steel sections, the thermal properties of the fire protection system, (the thermal performance). The limits of applicability of the results of the assessment arising from the fire test are defined, together with permitted direct application of the results to different steel sections and grades and to the fire protection system. The results of the test and assessment obtained according to this European standard are directly applicable to steel sections of I and H cross sectional shape and hollow sections.