SIST ISO 12643-2:2014

Graphic technology - Safety requirements for graphic technology equipment and systems - Part 2: Prepress and press equipment and systems

This part of ISO 12643 provides safety requirements specific to prepress and press equipment and systems. It is intended to be used in conjunction with the general requirements given in ISO 12643-1. This part of ISO 12643 provides additional safety requirements for the design and construction of new prepress and press equipment, and the auxiliary equipment integrated into the press control system.

Technologie graphique - Exigences de sécurité pour les systèmes et l'équipement de technologie graphique - Partie 2: Systèmes et équipement pour la presse

Grafična tehnologija - Varnostne zahteve za grafično tehnološko opremo in sisteme - 2. del: Grafična priprava in tiskarska oprema ter sistemi

General Information

• Status: Withdrawn
• Publication Date: 03-Feb-2014
• Withdrawal Date: 07-Jan-2024
• ICS: 37.100.10 - Reproduction equipment
• Technical Committee: GRT - Graphical technology
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 03-Jan-2024
• Due Date: 26-Jan-2024
• Completion Date: 08-Jan-2024
• Ref Project: ISO 12643-2:2010 - Graphic technology — Safety requirements for graphic technology equipment and systems — Part 2: Prepress and press equipment and systems

Relations

• Replaces: SIST ISO 12643-2:2008 - Graphic technology - Safety requirements for graphic technology equipment and systems - Part 2: Press equipment and systems
• Effective Date: 01-Mar-2014
• Replaced By: SIST EN ISO 12643-2:2024 - Graphic technology - Safety requirements for graphic technology equipment and systems - Part 2: Prepress and press equipment and systems (ISO 12643-2:2023)
• Effective Date: 01-Mar-2024
• Revised: oSIST prEN ISO 12643-2:2014 - Graphic technology - Safety requirements for graphic technology equipment and systems - Part 2: Prepress and press equipment and systems (ISO/DIS 12643-2:2014)
• Effective Date: 01-Sep-2014

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ISO 12643-2:2014
01-marec-2014
1DGRPHãþD
SIST ISO 12643-2:2008
*UDILþQDWHKQRORJLMD9DUQRVWQH]DKWHYH]DJUDILþQRWHKQRORãNRRSUHPRLQ
VLVWHPHGHO*UDILþQDSULSUDYDLQWLVNDUVNDRSUHPDWHUVLVWHPL
Graphic technology - Safety requirements for graphic technology equipment and systems
- Part 2: Prepress and press equipment and systems
Technologie graphique - Exigences de sécurité pour les systèmes et l'équipement de
technologie graphique - Partie 2: Systèmes et équipement pour la presse
Ta slovenski standard je istoveten z: ISO 12643-2:2010
ICS:
37.100.10 Reprodukcijska oprema Reproduction equipment
SIST ISO 12643-2:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 12643-2:2014

---------------------- Page: 2 ----------------------

SIST ISO 12643-2:2014

INTERNATIONAL ISO
STANDARD 12643-2
Second edition
2010-12-15


Graphic technology — Safety
requirements for graphic technology
equipment and systems —
Part 2:
Prepress and press equipment
and systems
Technologie graphique — Exigences de sécurité pour les systèmes
et l'équipement de technologie graphique —
Partie 2: Systèmes et équipement pour la préimpression et la presse





Reference number
ISO 12643-2:2010(E)
©
ISO 2010

---------------------- Page: 3 ----------------------

SIST ISO 12643-2:2014
ISO 12643-2:2010(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


COPYRIGHT PROTECTED DOCUMENT


©  ISO 2010
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland

ii © ISO 2010 – All rights reserved

---------------------- Page: 4 ----------------------

SIST ISO 12643-2:2014
ISO 12643-2:2010(E)
Contents Page
Foreword .v
Introduction.vi
1 Scope.1
2 Normative references.1
3 Terms and definitions .2
4 Conformity with this part of ISO 12643 .4
5 Equipment subject to requirements.5
5.1 General .5
5.2 Prepress equipment.5
5.3 Printing presses and coating/varnishing machines .5
5.4 Other equipment covered by this part of ISO 12643.6
6 Guarding of significant hazards .7
6.1 General .
...

INTERNATIONAL ISO
STANDARD 12643-2
Second edition
2010-12-15


Graphic technology — Safety
requirements for graphic technology
equipment and systems —
Part 2:
Prepress and press equipment
and systems
Technologie graphique — Exigences de sécurité pour les systèmes
et l'équipement de technologie graphique —
Partie 2: Systèmes et équipement pour la préimpression et la presse





Reference number
ISO 12643-2:2010(E)
©
ISO 2010

---------------------- Page: 1 ----------------------
ISO 12643-2:2010(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


COPYRIGHT PROTECTED DOCUMENT


©  ISO 2010
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland

ii © ISO 2010 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 12643-2:2010(E)
Contents Page
Foreword .v
Introduction.vi
1 Scope.1
2 Normative references.1
3 Terms and definitions .2
4 Conformity with this part of ISO 12643 .4
5 Equipment subject to requirements.5
5.1 General .5
5.2 Prepress equipment.5
5.3 Printing presses and coating/varnishing machines .5
5.4 Other equipment covered by this part of ISO 12643.6
6 Guarding of significant hazards .7
6.1 General .7
6.2 Guard openings.7
6.3 Guarding in-running nips .7
6.4 Interlocks.8
6.5 Hold-to-run controls.9
6.6 Automatic format-setting operations .9
6.7 Additional safeguarding methods for machine devices and components .10
7 Changing of printing plates.
...