iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST HD 582 S1:1999

(Main)

Specification for unused polybutenes

Specification for unused polybutenes

Covers specifications and test methods for unused polybutenes, as delivered, intended for use as insulating liquids in electrical equipment.

Bestimmung für ungebrauchte Polybutene

Spécification pour polybutènes neufs

Concerne les spécifications et les méthodes d'essai pour les polybutènes neufs, destinés à être utilisés comme isolants liquides dans le matériel électrique.

Specification for unused polybutenes (IEC 60963:1988)

General Information

Status
Published
Publication Date
31-Dec-1998
ICS
29.040.10 - Insulating oils
Technical Committee
TPD - Fluids for electrotechnical applications
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Jan-1999
Due Date
01-Jan-1999
Completion Date
01-Jan-1999
Ref Project
HD 582 S1:1991 - Specification for unused polybutenes

Buy Standard

HD 582 S1:1999HD 582 S1:1999
PreviousNext
Standardization document
HD 582 S1:1999
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST HD 582 S1:1999
01-januar-1999
Specification for unused polybutenes (IEC 60963:1988)
Specification for unused polybutenes
Bestimmung für ungebrauchte Polybutene
Spécification pour polybutènes neufs
Ta slovenski standard je istoveten z: HD 582 S1:1991
ICS:
29.040.10 Izolacijska olja Insulating oils
SIST HD 582 S1:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST HD 582 S1:1999

---------------------- Page: 2 ----------------------

SIST HD 582 S1:1999

---------------------- Page: 3 ----------------------

SIST HD 582 S1:1999

---------------------- Page: 4 ----------------------

SIST HD 582 S1:1999

---------------------- Page: 5 ----------------------

SIST HD 582 S1:1999

---------------------- Page: 6 ----------------------

SIST HD 582 S1:1999

---------------------- Page: 7 ----------------------

SIST HD 582 S1:1999

---------------------- Page: 8 ----------------------

SIST HD 582 S1:1999
NORME CEI
INTERNATIONALE IEC
60963
INTERNATIONAL
Première édition
STANDARD
First edition
1988-12
Spécification
pour polybutènes neufs
Specification for unused polybutenes
© IEC 1988 Droits de reproduction réservés — Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun any form or by any means, electronic or mechanical,
procédé, électronique ou mécanique, y compris la photo- including photocopying and microfilm, without permission in
copie et les microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: +41 22 919 0300 e-mail: inmail@iec.ch IEC web site http: //www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
J
PRICE CODE
International Electrotechnical Commission
IEC MentayHapogHan 3neKTpoTe%HH4ecHan KOMHCOHA
Pour prix, voir catalogue en vigueur
• • For price, see current catalogue

---------------------- Page: 9 ----------------------

SIST HD 582 S1:1999
3
963 0 IEC
CONTENTS
Page
FOREWORD 5
PREFACE 5
SECTION ONE - GENERAL
Clause
1. Scope 9
2. Definitions 9
3. Identification and general delivery requirements 9
4. Sampling 11
SECTION TWO - TEST METHODS
5. Test methods 11
SECTION THREE - INDIVIDUAL SPECIFICATIONS
6. General remark 15
7. Sheet 1: Specifications for unused cable and
capacitor polybutenes 15

---------------------- Page: 10 ----------------------

SIST HD 582 S1:1999
OO 5 —
963 I E C
INTERNATIONAL ELECTROTECHNICAL COMMISSION
SPECIFICATION FOR UNUSED POLYBUTENES
FOREWORD
1) The formal decisions or agreements of the IEC on technical matters,
prepared by Technical Committees on which all the National Committees
having a special interest therein are represented, express, as nearly
as possible, an international consensus of opinion on the subjects
dealt with.
2) They have the form of recommendations for international use and they
are accepted by the National Committees in that sense.
3) In order to promote international unification, the IEC expresses the
wish that all National Committees should adopt the text of the IEC
recommendation for their national rules in so far as national condi-
tions will permit. Any divergence between the IEC recommendation and
the corresponding national rules should, as far as possible, be clearly
indicated in the latter.
4) The IEC has not laid down any procedure concerning marking as an
indication of approval and has no responsibility when an item of
equipment is declared to comply with one of its recommendations.
PREFACE
This standard has been prepared by Sub-Committee 10A: Hydrocarbon
insulating oils, of IEC Technical Committee No. 10: Fluids for electro-
technical applications. (This Sub-Committee has been superseded by
Committee 10.)
The text of this standard is based on the following documents:
Six Months' Rule Report on Voting
10A(C0)71 10(C0)246
Full information on the voting for the approval of this standard can be
found in the Voting Report indicated in the above table.
The following IEC Publications are quoted in this standard:
Publications Nos. 156 (1963): Method for the determination of the
electric strength of insulating oils.
243 (1967): Recommended methods of test for electric
strength of solid insulating materials at
power frequencies.

---------------------- Page: 11 ----------------------

SIST HD 582 S1:1999
7—
963©IEC
247 (1978): Measurement of relative permittivity,
dielectric dissipation factor and d.c.
resistivity of insulating liquids.
475 (1974): Method of sampling liquid dielectrics.
liquids under
628 (1985): Gassing of insulating
electrical stress and ionization.
666 (1979): Detection and determination of specified
anti-oxidant additives in insulating oils.
733 (1982): Determination of water in insulating oils,
and in oil-impregnated paper and press-
board.
814 (1985): Determination of water in insulating
liquids by automatic coulometric Karl
Fischer titration.
Other publications quoted:
ISO Standard 2592 (1973): Petroleum products - Determination of flash
and fire points - Cleveland open cup method.
ISO Standard 2719 (1973): Petroleum products - Determination of flash
point - Pensky-Martens closed cup method.
ISO Standard 3016 (1974): Petroleum oils - Determination of pour point.
ISO Standard 3104 (1976): Petroleum products - Transparent and opaque
liquids - Determination of kinematic visco-
sity and calculation of dynamic viscosity.
ISO Standard 3675 (1976): Crude petroleum and liquid petroleum products
- Laboratory determination of density or
relative density - Hydrometer method.
ISO Standard 3838 (1983): Crude petroleum and liquid or solid petroleum
products - Determination of density or
relative density - Capillary-stoppered
pyknometer and graduated bicapillary pykno-
meter methods.
ISO Standard 4793 (1980): Laboratory sintered (fritted) filters -
Porosity grading, classification and desig-
nation.

---------------------- Page: 12 ----------------------

SIST HD 582 S1:1999
963 -© IEC 9
SPECIFICATION FOR UNUSED POLYBUTENES
SECTION ONE GENERAL
1. Scope
1.1 This standard covers specifications and test methods for unused
polybutenes, as delivered, intended for use as insulating liquids in
electrical equipment.
The requirements given in Sheet 1 are only applicable to unused
polybutenes used as an impregnant for paper insulated capacitors and
cables and as a filling medium for pipe type cables.
Note.- Polybutenes may be used in transformers, but nowadays this
application is not wide enough to justify the development of
international specifications.
Action could be taken when needed.
1.2 For the purpose of this standard two grades of polybutenes are
considered: Class I and Class II based on the values of certain
physical properties namely: viscosity, flash-point and pour-point.
2. Definitions
2.1 Additive
A suitable substance, which is deliberately added to an insulating
liquid in small proportion in order to improve certain characteristics.
2.2 Polybutenes
Polyisobutylenes, which are normally referred to as polybutenes, are
branched chain polyolefi
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 60867:2023(Main)
Insulating liquids - Specifications for unused liquids based on synthetic aromatic hydrocarbons
EN IEC 60867:2022

This International Standard covers specifications and test methods for unused synthetic aromatic hydrocarbons intended for use as insulating liquid in electrical equipment.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60599:2022(Main)
Mineral oil-filled electrical equipment in service - Guidance on the interpretation of dissolved and free gases analysis
EN IEC 60599:2022

This document describes how the concentrations of dissolved gases or free gases can be
interpreted to diagnose the condition of oil-filled electrical equipment in service and suggest
future action.
This document is applicable to electrical equipment filled with mineral insulating oil and
insulated with cellulosic paper or pressboard-based solid insulation. Information about specific
types of equipment such as transformers (power, instrument, industrial, railways, distribution),
reactors, bushings, switchgear and oil-filled cables is given only as an indication in the
application notes.
This document can be applied, but only with caution, to other liquid-solid insulating systems.
In any case, the indications obtained are given only as guidance with resulting action
undertaken only with proper engineering judgment.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60296:2020(Main)
Fluids for electrotechnical applications - Mineral insulating oils for electrical equipment
EN IEC 60296:2020

This document provides specifications and test methods for unused and recycled mineral
insulating oils (see Clause 3 for definitions). It applies to mineral oil delivered according to the
contractual agreement, intended for use in transformers, switchgear and similar electrical
equipment in which oil is required for insulation and heat transfer. Both unused oil and
recycled oil under the scope of this document have not been used in, nor been in contact with
electrical equipment or other equipment not required for manufacture, storage or transport.
Unused oils are obtained by refining, modifying and/or blending of petroleum products and
other hydrocarbons from virgin feedstock.
Recycled oils are produced from oils previously used as mineral insulating oils in electrical
equipment that have been subjected to re-refining or reclaiming (regeneration) by processes
employed offsite. Such oils will have originally been supplied in compliance with a recognized
unused mineral insulating oil specification. This document does not differentiate between the
methods used to recycle mineral insulating oil. Oils treated on-site (see IEC 60422) are not
within the scope of this document.
Oils with and without additives are both within the scope of this document.
This document does not apply to mineral insulating oils used as impregnating medium in
cables or capacitors.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61125:2018(Main)
Insulating liquids - Test methods for oxidation stability - Test method for evaluating the oxidation stability of insulating liquids in the delivered state
EN IEC 61125:2018

This document describes a test method for evaluating the oxidation stability of insulating
liquids in the delivered state under accelerated conditions regardless of whether or not
antioxidant additives are present. The duration of the test can be different depending on the
insulating liquid type and is defined in the corresponding standards (e.g. in IEC 60296,
IEC 61099, IEC 62770). The method can be used for measuring the induction period, the test
being continued until the volatile acidity significantly exceeds 0,10 mg KOH/g in the case of
mineral oils. This value can be significantly higher in the case of ester liquids.
The insulating liquid sample is maintained at 120 °C in the presence of a solid copper catalyst
whilst bubbling air at a constant flow. The degree of oxidation stability is estimated by
measurement of volatile acidity, soluble acidity, sludge, dielectric dissipation factor, or from
the time to develop a given amount of volatile acidity (induction period with air).
In informative Annex B, a test method for evaluating the oxidation stability of inhibited mineral
insulating oils in the delivered state by measurement of the induction period with oxygen is
described. The method is only intended for quality control purposes. The results do not
necessarily provide information on the performance in service. The oil sample is maintained
at 120 °C in the presence of a solid copper catalyst whilst bubbling through a constant flow of
oxygen. The degree of oxidation stability is estimated by the time taken by the oil to develop a
determined amount of volatile acidity (induction period with oxygen). Additional criteria such
as soluble and volatile acidities, sludge and dielectric dissipation factor can also be
determined after a specified duration.
In informative Annex C, a test method intended to simulate the thermo-oxidative behaviour of
ester insulating liquids (headspace of air at 150 °C for 164 h) is described.
Additional test methods such as those described in IEC TR 62036 based on differential
scanning calorimetry can also be used as screening tests, but are out of the scope of this
document.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60599:2016(Main)
Mineral oil-impregnated electrical equipment in service - Guide to the interpretation of dissolved and free gases analysis
EN 60599:2016

This International Standard describes how the concentrations of dissolved gases or free
gases may be interpreted to diagnose the condition of oil-filled electrical equipment in service
and suggest future action.
This standard is applicable to electrical equipment filled with mineral insulating oil and
insulated with cellulosic paper or pressboard-based solid insulation. Information about
specific types of equipment such as transformers (power, instrument, industrial, railways,
distribution), reactors, bushings, switchgear and oil-filled cables is given only as an indication
in the application notes (see Annex A).
This standard may be applied, but only with caution, to other liquid-solid insulating systems.
In any case, the indications obtained should be viewed only as guidance and any resulting
action should be undertaken only with proper engineering judgment.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62021-3:2015(Main)
Insulating liquids - Determination of acidity - Part 3: Test methods for non mineral insulating oils (IEC 62021-3:2014)
EN 62021-3:2014

This part of IEC 62021 describes two procedures for the determination of the acidity of
unused and used electrical non-mineral insulating oils. Method A is potentiometric titration
and Method B is colourimetric titration.
NOTE 1 In unused and used non-mineral insulating oils, the constituents that may be considered to have acidic
characteristics include organic acids, phenolic compounds, some oxidation products, resins, organometallic salts
and additives.
The method may be used to indicate relative changes that occur in non-mineral insulating oil
during use under oxidizing conditions regardless of the colour or other properties of the
resulting non-mineral oil.
The acidity can be used in the quality control of unused non-mineral insulating oil.
As a variety of oxidation products present in used non-mineral insulating oil contribute to
acidity and these products vary widely in their corrosion properties, the test cannot be used to
predict corrosiveness of non-mineral insulating oil under service conditions.
NOTE 2 The acidity results obtained by potentiometric test method may or may not be numerically the same as
those obtained by colourimetric methods, but they are generally of the same magnitude.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60422:2013(Main)
Mineral insulating oils in electrical equipment - Supervision and maintenance guidance
EN 60422:2013

This International Standard gives guidance on the supervision and maintenance of the quality of the insulating oil in electrical equipment. This standard is applicable to mineral insulating oils, originally supplied conforming to IEC 60296, in transformers, switchgear and other electrical apparatus where oil sampling is reasonably practicable and where the normal operating conditions specified in the equipment specifications apply. This standard is also intended to assist the power equipment operator to evaluate the condition of the oil and maintain it in a serviceable condition. It also provides a common basis for the preparation of more specific and complete local codes of practice. The standard includes recommendations on tests and evaluation procedures and outlines methods for reconditioning and reclaiming oil and the decontamination of oil contaminated with PCBs. NOTE The condition monitoring of electrical equipment, for example by analysis of dissolved gases, furanic compounds or other means, is outside the scope of this standard.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60567:2012(Main)
Oil-filled electrical equipment - Sampling of gases and analysis of free and dissolved gases - Guidance
EN ISO/IEC 17050-2:2004

ISO/IEC 17050-2:2004 specifies general requirements for supporting documentation to substantiate a supplier's declaration of conformity, as described in ISO/IEC 17050-1.
For the purposes of ISO/IEC 17050-2:2004, the object of a declaration of conformity can be a product, process, management system, person or body.

  • Standard
    61 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60666:2010
Detection and determination of specified additives in mineral insulating oils (IEC 60666:2010)
EN 60666:2010

The methods described in this International Standard concern the detection and determination of specified additives in unused and used mineral insulating oils. The detection methods may be applied to assess whether or not a mineral insulating oil contains an additive as specified by the supplier. The determination methods are used for the quantitative determination of additives known to be present or previously detected by the appropriate detection method.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CLC/TR 50503:2010(Main)
Guidelines for the inventory control, management, decontamination and or disposal of electrical equipment and insulating liquids containing PCBs
CLC/TR 50503:2010

The scope of this Technical report is to provide guidance for the activities of inventory, control, management, decontamination and/or disposal of equipment and containers with insulating liquid containing PCBs, in compliance with the Council Directives (96/59/EC), using Best Available Techniques - BAT - (96/61/EC), Commission Decision (2001/68/EC), Stockholm Convention on Persistent Organic Pollutants (POPs) and/or with appropriate national or local legislation. This Technical report is addressed, in particular, toward the Life Cycle Management (LCM) of insulating liquids and it has been developed in accordance with the following objectives:
a) reduction of risks for workers, public health and the environment, arising from human error, malfunction, or failures of the equipment that could cause fires or spillage of hazardous and Persistent Organic Pollutants (POPS)s;
b) implementation of the “Best Available Techniques” (BAT),”Best Environmental Practices”(BEP)and methodologies available for safety, whilst taking into account the surroundings and the criteria of self-sufficiency and functional recovery;
c) technical feasibility of the activities within the prescribed time schedules, taking into account current legislation and economic feasibility.
NOTE 1 For those CENELEC countries in which the European Directives do not apply, this Technical report has an informative purpose only. Different limits from those given in the present Technical report are required in some countries.
NOTE 2 For those countries outside of European Community the Stockholm Convention on Persistent Organic Pollutants (POPs) should be applied.
NOTE 3 When reading this Technical report, reference should also be made to Annex C of EN 50195 and Annex B of EN 50225, because in some EU countries (i.e. France, Italy, Poland, Spain, etc.) there are other mandatory requirements.

  • Technical report
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day